Electromagnetic Induction - Complete Study Guide Notes

Magnetic Flux and Electromagnetic Induction

  • Magnetic Flux (ΦB\Phi_B):

    • Definition: The magnetic flux linked with a surface held in a magnetic field is defined as the total number of magnetic field lines crossing the surface normally. It is denoted by ΦB\Phi_B.

    • Mathematical Expression: For a uniform magnetic field B⃗\vec{B} crossing a plane surface of area A⃗\vec{A} at an angle θ\theta with the normal to the plane surface:

ΦB=B⃗⋅A⃗\Phi_B = \vec{B} \cdot \vec{A}

ΦB=BAcos⁡(θ)\Phi_B = B A \cos(\theta)

  • Units: The S.I. unit of magnetic flux is Tesla metre2\text{Tesla metre}^2 (T m2\text{T}\,\text{m}^2) or Weber\text{Weber} (Wb\text{Wb}).

    • Electromagnetic Induction:

  • Definition: The phenomenon of producing electric current in a coil when the magnetic flux linked with the coil changes is called electromagnetic induction.

  • Historical Discovery: This phenomenon was discovered independently by Michael Faraday and Joseph Henry through a series of landmark experiments.

Faraday's Laws of Electromagnetic Induction

  • Faraday's First Law:

    • Whenever there is a change of magnetic flux through a circuit, an induced electromotive force (emf) is set up in the circuit. This induced emf lasts as long as the change in magnetic flux persists.

  • Faraday's Second Law:

    • The magnitude of the induced emf in a circuit is equal to the time rate of change of magnetic flux through the circuit.

    • Equation:

E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}

  • Significance of the Negative Sign: The negative sign (−-) indicates the direction of the induced emf and hence the direction of the induced current in a closed loop. The flow of current due to the induced emf is always such that it opposes the change in magnetic flux that causes it.

  • For a Coil of NN Turns:

E=−NdΦBdt\mathcal{E} = -N \frac{d\Phi_B}{dt}

Lenz's Law and Conservation of Energy

  • Statement of Lenz's Law:

    • The polarity of the induced emf is such that it tends to produce an electric current which opposes the change in magnetic flux that produces it.

  • Lenz's Law and Energy Conservation Analysis:

    • Case 1: Approaching North Pole:

    • Consider the North pole of a bar magnet being pushed towards a closed loop/coil.

    • As the north pole moves towards the coil, the magnetic flux linked with the coil increases.

    • According to Lenz's law, the induced current in the coil flows in such a direction as to oppose this increase in magnetic flux.

    • This opposition is possible only if the induced current flows in an anti-clockwise direction when viewed from the side of the approaching magnet, making the coil behave as a North pole facing the approaching North pole of the magnet.

Coil facing approaching north pole of magnet
  • Hypothetical Paradox (Violation of Energy Conservation):

    • Suppose the induced current flowed in the opposite direction (clockwise direction).

    • The facing side of the coil would then become a South pole, attracting the approaching North pole of the magnet.

    • The bar magnet would be pulled towards the coil with an ever-increasing acceleration.

    • A gentle initial push would initiate a process where velocity and kinetic energy continuously increase without expending external energy.

    • This perpetual creation of energy violates the Fundamental Law of Conservation of Energy.

  • Physical Energy Balance:

    • In reality, because the coil develops an identical magnetic pole (North pole facing North pole), the magnet experiences a repulsive force due to the induced current.

    • An external agent (person) must perform mechanical work to move the magnet against this repulsive force.

    • The mechanical energy spent by the external agent is eventually dissipated as thermal energy via Joule heating produced by the induced current.

  • Case 2: Receding North Pole:

    • If the North pole of the bar magnet is withdrawn away from the coil, the magnetic flux linked with the coil decreases.

    • To counter this decrease in magnetic flux, the induced current in the coil flows in a clockwise direction.

    • The coil presents a South pole facing the receding North pole of the magnet, exerting an attractive force that opposes the withdrawal motion of the magnet.

Coil facing receding north pole of magnet

Self Induction and Self Inductance

  • Concept of Self Induction:

    • Consider a coil connected in series with a battery and a tap key K$.\n - **Growth Phase**: When key K is pressed, current starts growing from zero to maximum through the coil. Consequently, magnetic field lines linked with the coil grow, producing an induced emf that opposes the growth of current in the circuit.\n - **Decay Phase**: When key K is released, current in the circuit starts decaying from maximum to zero. Consequently, magnetic field lines linked with the coil decrease, producing an induced emf that opposes the decay of current in the circuit.\n - **Back EMF**: Because an opposing induced emf is produced during both the growth and decay of current, the induced emf is also called **back emf**.\n - **Definition**: Self induction is the phenomenon due to which an opposing induced emf is produced in a coil as a result of a change in current or magnetic flux linked with the same coil.\n\n![Self induction circuit with coil, battery, and key](https://assets.knowt.com/pdf-flow-prod/afa2a2e8-5330-4e81-872d-50c075704dbb-figures/4.jpg)\n\n- **Coefficient of Self Induction (Self Inductance L)**:\n - The magnetic flux \Phi_Blinkedwiththecoilatanyinstantisdirectlyproportionaltothecurrentlinked with the coil at any instant is directly proportional to the currentI passing through it at that instant:\n\n\Phi_B \propto I\n\n\Phi_B = L I\n\n - Where L is the constant of proportionality called the **coefficient of self induction** or **self inductance**.\n - **Definition 1 (in terms of Flux)**: When I = 1\,\text{A},,L = \Phi_B. Self inductance of a coil is numerically equal to the magnetic flux linked with the coil when a unit current flows through it.\n - **Definition 2 (in terms of EMF)**: From Faraday's law of induction:\n\n\mathcal{E} = -\frac{d\Phi_B}{dt} = -\frac{d(LI)}{dt}\n\n\mathcal{E} = -L \frac{dI}{dt}\n\n - Taking numerical magnitude: when \frac{dI}{dt} = 1\,\text{A/s},,\mathcal{E} = L.Selfinductanceofacoilisnumericallyequaltotheinducedemfproducedinthecoilwhentherateofchangeofcurrentinthecoilisunity(. Self inductance of a coil is numerically equal to the induced emf produced in the coil when the rate of change of current in the coil is unity (1\,\text{A/s}).\n - **S.I. Unit**: The S.I. unit of self inductance is **Henry** (\text{H}).\n\n# Self Inductance of a Solenoid and Energy Storage\n\n- **Self Inductance Derivation for a Solenoid**:\n - Consider a solenoid of cross-sectional area A,length, lengthl,and, andnturnsperunitlengthcarryingcurrentturns per unit length carrying currentI\n - Magnetic field inside the solenoid:\n\nB = \mu_0 n I\n\n - Total number of turns in solenoid: N = n l \implies n = \frac{N}{l}\n - Total magnetic flux \Phi linked with the entire solenoid:\n\n\Phi = B A N\n\n\Phi = (\mu_0 n I) A (n l)\n\n\Phi = \mu_0 n^2 A l I\n\n - Using L = \frac{\Phi}{I}, self inductance is:\n\nL = \mu_0 n^2 A l\n\n - In terms of total turns N:\n\nL = \frac{\mu_0 N^2 A}{l}\n\n - **Effect of Core Material**: If the interior of the solenoid is filled with a magnetic material of relative permeability \mu_r:\n\nL = \mu_0 \mu_r n^2 A l\n\n- **Physical Significance of Self Inductance**:\n - Self inductance plays the role of **inertia** in electromagnetic phenomena; it is the electromagnetic analogue of mass m in classical mechanics.\n - Work must be done against the back emf to establish current in an inductive circuit.\n - This work done is stored inside the magnetic field as **magnetic potential energy**.\n\n- **Derivation of Energy Stored in an Inductor**:\n - For instantaneous current Iandinducedemfand induced emf\mathcal{E}, rate of work done is:\n\n\frac{dW}{dt} = \mathcal{E} I\n\n - Substituting magnitude \mathcal{E} = L \frac{dI}{dt}, we get:\n\n\frac{dW}{dt} = L I \frac{dI}{dt}\n\ndW = L I dI\n\n - Integrating from 0tofinalcurrentto final currentI:\n\nW = \int_0^I L I \, dI\n\nW = \frac{1}{2} L I^2\n\n - Stored Magnetic Potential Energy (U_B):\n\nU_B = \frac{1}{2} L I^2\n\n - **Mechanical Analogy**: This formula is directly analogous to kinetic energy K.E. = \frac{1}{2} m v^2,whereselfinductance, where self inductanceLrepresentselectricalinertia(massrepresents electrical inertia (massm)andcurrent) and currentIrepresentsvelocityrepresents velocityv\n\n# Mutual Induction and Mutual Inductance\n\n- **Concept of Mutual Induction**:\n - Mutual induction is the phenomenon of producing an induced emf in one coil due to a varying current in a neighbouring coil.\n\n- **Experimental Setup and Coupled Circuit**:\n - Consider two coils P_1 P_2andandS_1 S_2 placed close together.\n - **Primary Coil (P_1 P_2)**: Connected to a battery through a tap key.\n - **Secondary Coil (S_1 S_2)**: Connected to a sensitive galvanometer.\n - The two circuits together are termed a **coupled circuit**.\n\n![Primary and secondary coupled circuits with galvanometer](https://assets.knowt.com/pdf-flow-prod/afa2a2e8-5330-4e81-872d-50c075704dbb-figures/7.jpg)\n\n - **Observation & Mechanism**:\n - When key is pressed: Primary current increases from 0 to maximum, increasing flux linked with primary and secondary. The galvanometer pointer gives a sudden kick in one direction (e.g., to the left).\n - When key is released: Primary current falls from maximum to 0, decreasing flux linked with both coils. The galvanometer pointer deflects in the opposite direction (to the right).\n\n- **Coefficient of Mutual Induction (Mutual Inductance M)**:\n - Let \Phibethetotalmagneticfluxlinkedwithsecondarycoilwhencurrentbe the total magnetic flux linked with secondary coil when currentI flows in primary coil:\n\n\Phi \propto I\n\n\Phi = M I\n\n - Where M is the coefficient of mutual induction or mutual inductance.\n - **Definition 1**: When I = 1\,\text{A},,M = \Phi. Mutual inductance is defined as the magnetic flux linked with the secondary coil when a unit current flows through the primary coil.\n - **Definition 2 (via EMF)**: Differentiating \Phi = M Iwithrespecttotimewith respect to timet:\n\n\frac{d\Phi}{dt} = M \frac{dI}{dt}\n\n\mathcal{E} = -\frac{d\Phi}{dt} = -M \frac{dI}{dt}\n\n - Numerically, when \frac{dI}{dt} = 1\,\text{A/s},,M = \mathcal{E}.Mutualinductanceoftwocircuitsisequaltotheinducedemfsetupinonecircuitwhentherateofchangeofcurrentintheothercircuitisunity(. Mutual inductance of two circuits is equal to the induced emf set up in one circuit when the rate of change of current in the other circuit is unity (1\,\text{A/s}).\n - **S.I. Unit**: The S.I. unit of mutual inductance is **Henry** (\text{H}).\n\n# Mutual Inductance of Two Long Co-axial Solenoids\n\n- **Setup**:\n - Two long co-axial solenoids S_1andandS_2ofequallengthof equal lengthl\n - Inner solenoid S_1:radius: radiusr_1,turndensity, turn densityn_1\n - Outer solenoid S_2:radius: radiusr_2,turndensity, turn densityn_2(where(wherer_1 < r_2)\n\n![Two long co-axial solenoids S1 and S2](https://assets.knowt.com/pdf-flow-prod/afa2a2e8-5330-4e81-872d-50c075704dbb-figures/9.jpg)\n\n- **Derivation of M_{12}(Fluxin(Flux inS_1duetocurrentindue to current inS_2)**:\n - Pass current I_2throughoutersolenoidthrough outer solenoidS_2\n - Magnetic field inside S_2isisB_2 = \mu_0 n_2 I_2\n - Flux \Phi_1linkedwithinnersolenoidlinked with inner solenoidS_1:\n\n\Phi_1 = \text{Area of } S_1 \times B_2 \times \text{Total turns of } S_1\n\n\Phi_1 = (\pi r_1^2) (\mu_0 n_2 I_2) (n_1 l)\n\n - Mutual Inductance M_{12} = \frac{\Phi_1}{I_2}, giving:\n\nM_{12} = \mu_0 n_1 n_2 \pi r_1^2 l\n\n- **Derivation of M_{21}(Fluxin(Flux inS_2duetocurrentindue to current inS_1)**:\n - Pass current I_1throughinnersolenoidthrough inner solenoidS_1\n - Magnetic field B_1 = \mu_0 n_1 I_1isconfinedentirelyinsideis confined entirely insideS_1becausethesolenoidsareverylong(fieldoutsidebecause the solenoids are very long (field outsideS_1 is zero).\n - The effective cross-sectional area containing magnetic field inside S_2isonlytheareaofis only the area ofS_1((\pi r_1^2).\n - Flux \Phi_2linkedwithoutersolenoidlinked with outer solenoidS_2:\n\n\Phi_2 = (\pi r_1^2) (\mu_0 n_1 I_1) (n_2 l)\n\n - Mutual Inductance M_{21} = \frac{\Phi_2}{I_1}, giving:\n\nM_{21} = \mu_0 n_1 n_2 \pi r_1^2 l\n\n- **Reciprocal Property**:\n\nM_{12} = M_{21}\n\n# Magnetic Energy Stored per Unit Volume in a Solenoid\n\n- **Total Energy Stored in Solenoid Magnetic Field**:\n - Stored energy expression: U_B = \frac{1}{2} L I^2\n - Substituting L = \mu_0 n^2 A landandB = \mu_0 n I \implies I = \frac{B}{\mu_0 n}, we get:\n\nU_B = \frac{1}{2} (\mu_0 n^2 A l) \left(\frac{B}{\mu_0 n}\right)^2\n\nU_B = \frac{1}{2} (\mu_0 n^2 A l) \frac{B^2}{\mu_0^2 n^2}\n\nU_B = \frac{B^2 A l}{2 \mu_0}\n\n- **Magnetic Energy Density (u_B)**:\n - Volume of solenoid V = A l\n - Energy stored per unit volume (u_B):\n\nu_B = \frac{U_B}{V} = \frac{U_B}{A l} = \frac{B^2 A l}{2 \mu_0 A l}\n\nu_B = \frac{B^2}{2 \mu_0}\n\n# Motional Electromotive Force (EMF)\n\n- **Definition**: The emf induced in a conductor moving inside a magnetic field due to the change in area enclosed by the circuit is called **motional emf**.\n\n- **Mathematical Derivation**:\n - Consider a rectangular planar conductor loop where arm PQoflengthof lengthl is free to slide.\n - The system is placed in a uniform magnetic field B directed perpendicular to the plane of the paper inwards.\n - Arm PQmovesleftwardswithconstantspeedmoves leftwards with constant speedv\n\n![Rectangular conductor with movable arm PQ in uniform magnetic field](https://assets.knowt.com/pdf-flow-prod/afa2a2e8-5330-4e81-872d-50c075704dbb-figures/12.jpg)\n\n - Instantaneous flux linked with loop PQRSatpositionat positionx:\n\n\Phi = B l x\n\n - Induced emf according to Faraday's law:\n\n\mathcal{E} = -\frac{d\Phi}{dt} = -\frac{d(B l x)}{dt} = -B l \frac{dx}{dt}\n\n - Since position xdecreasesasarmmovesleft,decreases as arm moves left,\frac{dx}{dt} = -v\n - Substituting \frac{dx}{dt} = -v\n\n\mathcal{E} = B l v\n\n- **Fleming's Right-Hand Rule**:\n - **Rule Statement**: Stretch the thumb, forefinger, and middle finger of your right hand mutually perpendicular to one another:\n - **Thumb**: Points in the direction of motion of conductor.\n - **Forefinger**: Points in the direction of magnetic field.\n - **Middle finger**: Points in the direction of induced current.\n - **Application to Arm PQ∗∗:ApplyingFleming′sRight−HandRuletoarm**: Applying Fleming's Right-Hand Rule to armPQmovingleftinaninwardmagneticfieldshowsthatinducedcurrentflowsfrompointmoving left in an inward magnetic field shows that induced current flows from pointPtopointto pointQ\n\n# Quantitative Energy Consideration and Joule Heating\n\n- **Motional EMF**: \mathcal{E} = B l v\n\n- **Induced Current (I)**:\n - For circuit resistance R:\n\nI = \frac{\mathcal{E}}{R} = \frac{B l v}{R}\n\n- **Mechanical Force (F) on Moving Arm**:\n - The magnetic force exerted on arm PQcarryinginducedcurrentcarrying induced currentI:\n\nF = B I l = B \left(\frac{B l v}{R}\right) l\n\nF = \frac{B^2 l^2 v}{R}\n\n- **Mechanical Power Input (P)**:\n - Power required by external agent to pull the arm at speed v\n\nP = F v = \left(\frac{B^2 l^2 v}{R}\right) v\n\nP = \frac{B^2 l^2 v^2}{R}\n\n- **Electrical Power Dissipated as Heat (P_J)**:\n - Power loss due to Joule heating in resistance R\n\nP_J = I^2 R = \left(\frac{B l v}{R}\right)^2 R = \frac{B^2 l^2 v^2}{R^2} R\n\nP_J = \frac{B^2 l^2 v^2}{R}\n\n- **Energy Conservation Conclusion**:\n - Mechanical power input matches electrical thermal dissipation exactly (P = P_J).\n - Mechanical work performed to move arm PQ$$ is fully converted into electrical energy and subsequently dissipated as Joule heat, perfectly consistent with energy conservation principles.