MICRO 2042 LABS - Practical Exam # 1 Review

MICRO 2042 LABS

Practical Exam #1 Review

  • Note: This review is not inclusive.

Introduction Material

  • Safety Practices of the Lab:
    • Know how to dispose of biohazardous materials, which include:
    • Plates
    • Cultured tubes
    • Glass
    • Other materials
  • Aseptic Technique:
    • It is essential in microbiology to avoid contamination.
  • Microscopes:
    • Parts:
    • Lenses:
      • Ocular Lens: Main lens through which the specimen is viewed.
      • Objective Lens: Located near the specimen, used for magnification.
    • Condenser: Focuses light onto the specimen.
    • Diaphragm: Controls the amount of light reaching the specimen.
    • Coarse Adjustment Knobs: Used to make large adjustments in focus.
    • Fine Adjustment Knobs: Used for precise focusing.
    • Stage: Platform where slides are placed.
    • Light Source: Provides illumination; operates under specific voltage.
  • Use and Care: Proper handling and maintenance are crucial for longevity and accuracy.
  • Important Concepts:
    • Parfocal: Microscope’s ability to stay in focus when switching between objectives.
    • Resolution: The ability to distinguish between two points as separate.
    • Total Magnification: Calculated as the product of the ocular lens magnification and the objective lens magnification.
    • Microscope Handbook

Inoculation of Culture Media

  • Types of Media:
    • Nutrient Agar Plate
    • Nutrient Agar Slant
    • Used for isolation of colonies and temporary storage of cultures.
    • Nutrient Broth: Primarily used for propagation of cultures.
  • Autoclave Machine:
    • Used for sterilization by utilizing:
    • Temperature: 121ext°C121^{ ext{°C}}
    • Pressure: 15extpsi15 ext{ psi}
    • Time: 15extminutes15 ext{ minutes}
  • Four Quadrant Streaking Technique: Used to isolate individual colonies from a mixture of bacteria.

Colony and Cell Morphology

  • Colony Morphology Examples:
    • Bacillus megaterium: Typical cell and colony characteristics.
    • Klebsiella pneumoniae: Characteristics as observed on various media.
    • Blood Agar Variations:
    • Streptococcus pneumoniae: Growth on blood agar.
    • HC Bacillus sp.: Observed on Mueller-Hinton agar.
    • Mycobacterium fortuitum:Growth characteristics on blood agar.
  • Cell Morphology and Arrangement:
    • Cell Shapes:
    • Diplococcus: Pairs of cocci.
    • Tetrad: Group of four cocci.
    • Diplobacillus: Pairs of bacilli.
    • Streptococcus: Chains of cocci.
    • Streptobacillus: Chains of bacilli.
    • Staphylococcus: Clusters of cocci.

Media Overview

  • Columbia CNA Agar (Colistin/Nalidixic Acid Agar):

    • Selectivity: Selective for Gram-positive organisms, inhibitory for Gram-negative.
    • Inhibitors: Colistin, Nalidixic acid.
    • Results: Growth indicates presence of Gram-positive organisms.
  • MacConkey Agar:

    • Selectivity: Selective for Gram-negative organisms, inhibitory for Gram-positive.
    • Inhibitors: Bile salts.
    • Indicators: Neutral Red.
    • Results:
    • Lactose fermenters produce pink or red colonies (may or may not have precipitation zone).
    • Lactose non-fermenters yield clear colonies.
  • Mannitol Salt Agar:

    • Growth of: Staphylococcus species due to high sodium chloride (7.5%).
    • Indicator: Phenol Red change.
    • Results:
    • S. saprophyticus ferments mannitol, yielding yellow colonies and media.
    • S. epidermidis grows, but does not ferment mannitol, hence media is not yellow.
  • Blood Agar Plates:

    • Purpose: Enrichment media for fastidious organisms, supporting both Gram-positive and Gram-negative growth.
    • Hemolytic Patterns Observed:
    • Beta Hemolysis: Complete hemolysis.
    • Alpha Hemolysis: Partial hemolysis.
    • Gamma Hemolysis: No hemolysis.

Gram Staining

  • Purpose: Differential staining technique based on cell wall properties.

  • Principle: Differentiation between Gram-positive and Gram-negative bacteria based on peptidoglycan vs. lipid content.

  • Steps of the Gram Staining Procedure:

    1. Crystal Violet: Primary stain applied first.
    2. Iodine: Acts as a mordant, forming complexes with the crystal violet.
    3. Alcohol (95%): Used as a decolorizer; crucial step lasting 2-3 seconds or until color runs out.
    4. Safranin: Secondary/counterstain applied leading to end results.
  • Results of Gram Staining:

    • Gram Positive Bacteria: Appear purple (e.g., Staphylococcus spp., Bacillus megaterium).
    • Gram Negative Bacteria: Appear reddish-pink (e.g., Escherichia coli, Pseudomonas fluorescens or P. putida).
  • Gram Staining Images:

    • ![Gram Positive](https://www.mycrobe.org/blog/2018/5/25/hmc4q31h20gvpdpe0o gegccs5dr018)
    • Gram Negative

Endospore Staining

  • Characteristic Features:
    • Green spores inside bacterial cells indicative of certain Gram-positive bacteria.
  • Other Stains: Important for bacterial identification and classification, including acid-fast staining methods.

Spread Plating Technique

  • Procedure Steps:
    1. Pour a sample (0.1 mL) onto solid medium for bacterial dilution.
    2. Dip the cell spreader in alcohol, burning off excess alcohol.
    3. Cool the cell spreader before use.
    4. Spread the sample evenly over the surface of the medium.
    5. Incubate the plate until bacterial colonies grow on the surface.
    6. Visual representations of the apparatus used including turntables and cell spreaders.
    • Spread Plate Technique

Microbial Control: Effects of Temperature on Bacterial Growth

  • Classification of Organisms:
    • Organism A and Organism B may show different classifications based on growth patterns at specific temperatures.
  • Impact on Society: Assessments needed for understanding the benefits or detriments of each type of organism.
    • Potential implications on public health and microbial studies.

Microbial Control: Effects of Temperature on Enzyme Activity

  • Temperature Examples:
    • Effects observed at 25ext°C25^{ ext{°C}} and 37ext°C37^{ ext{°C}}.