TEAS - 4.1
Measurement quantities and units
Accuracy in measuring, recording, and diagramming data is important. Scientists use the metric system, or Système Internationale (SI), to measure and record data. Base units and prefixes describe different sizes of measurements.
Term | Description or value |
Mass | The amount of matter in an object. The SI base unit given is the kilogram (kg). The glossary also describes mass as a measurement of inertia. |
Length | Distance from end to end. Used to describe length, width, and height. The SI base unit is the meter (m). |
Time | The SI base unit is the second (s). |
Volume | The amount of space something takes up. The pages use liters for liquid volume and cubic length units for three-dimensional objects. |
SI units in the glossary | Meters, kilograms, seconds, amperes, Kelvin, candela, and mole. |
Metric prefixes as listed in the pages
Term | Description or value |
kilo | 1,000 |
hecta | 100 |
deca | 10 |
No prefix | 1 |
deci | 0.1 |
centi | 0.01 |
milli | 0.001 |
micro | The provided chart prints 0.0001 for this prefix. |
The pages identify kilo, hecta, deca, deci, centi, and milli as prefixes covered by the TEAS. Prefixes can be used with different units. Examples: 1 kilometer = 1,000 meters; 1 centimeter = 0.01 meters; 1 kilogram = 1,000 grams; and 1 centigram = 0.01 grams.
Dimensional analysis and conversions
Dimensional analysis converts a measurement from one unit size to another. A conversion factor expresses the relationship between units. It changes how the quantity is written without changing the actual measurement.
Printed example: convert 5 liters to milliliters by multiplying 5 L by 1,000 mL per 1 L. This gives 5,000 mL.
Reading a ruler
Identify the units and numerical value correctly. In the ruler shown, each numbered mark represents a centimeter (cm). The smaller marks represent one tenth of a centimeter, or one millimeter (mm). The first small mark after 2 cm is 2.1 cm, equivalent to 21 mm. Always begin measuring at the zero point on the tool.
Selecting a measurement tool
Term | Description or value |
Length | Use a ruler or meterstick to measure an object from end to end. |
Volume of a solid | For the rectangular solid shown, multiply length × width × height. Measure the sides with a ruler or meterstick. |
Large liquid volumes | The pages identify a volumetric flask as the most accurate tool for large volumes. |
Small liquid volumes | Use a volumetric pipette for precise measurement of small amounts of liquid. |
A range of liquid volumes | A graduated cylinder measures a range of volumes, but the pages describe it as less accurate than volumetric flasks or pipettes. |
Mass | Use a triple-beam balance or electronic balance. Electronic balances are more common because they are easier to use. |
The illustrated solid is labeled with length and width; its volume also depends on height. A container measuring 10 cm × 10 cm × 10 cm has a volume of 1,000 cm³, which the pages relate to one liter.
The meniscus
A meniscus is the curve at the top of a liquid in its container. Depending on the liquid and container, the surface can be curved upward (concave), curved downward (convex), or flat. The pages instruct the reader to keep the reading line even with the center of the meniscus when measuring liquid volume.
Choosing an appropriate measurement scale
Choose a unit that suits the size of the object or quantity. This makes the measurement easier to state and interpret.
Term | Description or value |
A person or other large mass | Kilograms. The example uses 75 kg rather than 75,000 g. |
A few drops of water | Milliliters rather than liters. |
Small objects such as insects or fingernails | Millimeters. |
The width of a piece of paper | Centimeters. |
The height of a door or ceiling | Meters. |
The distance between two towns | Kilometers. |