Ohio Driver Manual Notes
Ohio BMV Services
Visit the BMV website at www.bmv.ohio.gov for information about Ohio’s BMV services.
About the Ohio Driver Manual
The Ohio Bureau of Motor Vehicles (BMV) oversees driver and motor vehicle licensing and registration.
The Ohio Driver Manual is a study guide for those needing an Ohio Driver License, which is required by law to drive a motor vehicle in Ohio.
The manual provides guidance on motor vehicle laws but may not cover all applicable laws.
The manual explains the general process for obtaining a Driver License and summarizes laws and safe driving practices.
It is not a substitute for the Ohio Revised Code or the Ohio Administrative Code.
Information in the manual is subject to change.
The Ohio Driver Manual is available on the BMV website in multiple formats.
BMV ONLINE SERVICES:
Complete the knowledge test
Schedule a driving test
Save your place in line at a Deputy Registrar License Agency
Renew or reprint your Ohio Driver License or ID Card* (*Fees apply)
Section 1: How to Get Your Driver License
Overview of the section's contents:
Vision Screening & Knowledge Testing
Temporary Instruction Permit Identification Card (TIPIC)
Driver Education Requirements for those under age 18
Motorcycle Ohio
Vision Screening and Knowledge Testing
Minimum age to complete vision screening and knowledge test: 15 years and six months.
Vision Screening:
Must meet vision standards to get a Driver License.
Bring glasses or contacts if needed.
Driving restrictions may apply based on vision screening results.
Knowledge Testing:
Study the Ohio Driver Manual for the knowledge test.
Use the online Sample Knowledge Test.
The test is 40 multiple-choice questions (75% passage rate needed).
Available in multiple languages.
Interpreter allowed by scheduling an appointment at a Driver Exam Station.
If you pass:
Go to a Deputy Registrar License Agency to purchase a Temporary Instruction Permit Identification Card (TIPIC) within 60 days of passing the test.
If you fail:
Must wait one day before retesting.
No limit on how many times you can take the test, but only once a day.
Knowledge Testing is available:
Online through BMV Online Services.
In-person at a BMV Driver Examination Station.
In-person at select BMV Deputy Registrar License Agencies.
Disability Accommodations:
Contact your local Driver Exam Station for knowledge test and/or driving test accommodations.
Temporary Instruction Permit Identification Card (TIPIC) – ORC 4507.05
Once you successfully complete the vision screening and knowledge test, visit a Deputy Registrar License Agency within 60 days to purchase a TIPIC.
If a TIPIC is not purchased within 60 days, you must start over with the vision screening and knowledge test.
Applicants must present documents from the Acceptable Documents List to prove the following elements of identity:
Full legal name
Date of birth
Social Security number (if assigned)
Citizenship or legal presence
Ohio street address (two documents proving address are needed for a federally-compliant card)
If the applicant is under age 18, the applicant’s parent or guardian must be present to co-sign the TIPIC application.
If you have an Ohio Identification (ID) card, it will be canceled when the TIPIC is issued. An Ohio resident may hold only one Driver License or ID card at a time.
TIPIC Restrictions
Under age 16: If under age 16, the driver must have a parent, guardian, custodian, licensed driving instructor, or a person age 21 or older, who acts in loco parentis, occupying the front passenger seat beside the permit holder.
Age 16 to 17: Driving with any valid licensed driver, age 21 or older, in the front passenger seat is permitted, except from midnight to 6 a.m. when the driver must be accompanied by a parent, guardian, or custodian who holds a valid Driver License.
Age 18 and over: Practice driving only if accompanied by a licensed driver age 21 or older.
All ages:
Drivers must carry the TIPIC at all times when driving.
The eligible adult in the front passenger seat shall not be intoxicated.
The driver and all passengers must wear safety belts.
Use of any mobile electronic device is prohibited while driving.
Total number of occupants in the vehicle cannot exceed the total number of safety belts installed in the vehicle.
Driver Education Requirements (Under Age 18)
To obtain a Driver License, a driver under age 18 must meet these requirements:
Complete a driver education class at a licensed driver training school with 24 hours of classroom or online instruction, and 8 hours of driving time.
Complete 50 hours of driving with a parent or guardian, with at least 10 hours of night driving.
Hold the TIPIC for at least six months.
Find a driving school and additional information at Ohio Driver Training (www.drivertraining.ohio.gov).
Motorcycle Ohio
Obtain a motorcycle license or endorsement by completing a motorcycle skills test at a Driver Exam Station or completing the Motorcycle Ohio’s Basic Rider Course.
The Motorcycle Operator Manual (MOP 0001) provides further guidance to obtain a motorcycle endorsement.
Enroll in a motorcycle training course and find more information at Motorcycle Ohio (www.motorcycle.ohio.gov).
Section 2: Before You Drive
Overview of the section's contents:
Inspecting Your Vehicle (tires, lights)
Driver Position: Seat & Mirror Adjustments
Safety Restraints (air bags, safety belts)
Inspecting Your Vehicle
Ensure your vehicle is safe for you and your passengers before you drive.
Vehicle Equipment Regulations – ORC 4513 and OAC 4501:2-1
Ohio law states: “No person shall drive or move, or cause or knowingly permit to be driven or moved, on any highway any vehicle or combination of vehicles which is in such unsafe condition as to endanger any person.”
No vehicle is to be equipped with or permitted to have protruding objects, broken sharp edges, or vehicle parts that would be dangerous to a person coming in contact with them.
Ohio law also defines the equipment required for vehicles and the conditions that equipment must meet.
The average motor vehicle should have this equipment:
Steering assembly that operates normally, with no excessive play in the steering wheel
Tires with a minimum of 1/16-inch tread depth and no major bumps, bulges, or damage
At least two seat belts in the front seat
Brakes:
Service brake that is adequate to slow, stop, and control the vehicle
Parking brake that is adequate to hold the vehicle on a grade
Lights:
Two headlights, one on each side, in working order
Two red reflectors on the rear of the vehicle, visible from 300 feet
One taillight that emits red light, visible from 500 feet
Two red stop lights (brake lights) visible from 500 feet when the brakes are applied
White light to illuminate the rear license plate, visible from 50 feet
Turn signals in working order, visible from 300 feet:
Two at the front of the vehicle
Two at the rear of the vehicle
Windshield wipers in good working condition, able to clear precipitation from the windshield
Rear-view mirror providing an unobstructed view to the rear of the vehicle
Horn in good working order, audible from 200 feet, and identifiable as a motor vehicle horn
Exhaust system in good working order and constant operation
Window light transmission within the acceptable percentages:
Windshield: 70% light transmission (standard for most new cars)
Side windows of front seat: 50% light transmission, plus or minus 3%
Does your vehicle have safety recalls? Search with your vehicle’s Vehicle Identification Number (VIN) for recalls at the National Highway Traffic Safety Administration (NHTSA) website: http://www.nhtsa.gov/recalls.
Tire Safety
Crashes due to tire maintenance are preventable, and simple steps can save lives.
Driving on underinflated or overinflated tires or tires with low tread can lead to safety issues on the road.
Tire Inflation:
Maintain the tires at the vehicle manufacturer’s recommended tire pressure level.
The vehicle manufacturer’s recommended tire pressure, measured in PSI, is indicated on the door jamb.
Check tire pressure when the tires are the same temperature as the surrounding air.
Remove the cap from the valve stem and use a pressure gauge to check the tire pressure.
If the number is too low, inflate your tires to the correct level. If the number is too high, release air from the tire valve.
Tire Tread Depth
A tire in safe condition has a minimum of 1/16-inch tread depth on the road surface and is free of major bumps or bulges, breaks, or tread damage.
A common way to check tire tread depth is with a U.S. penny coin. Place the coin with President Abraham Lincoln’s head into the tire’s deepest groove. If you see all of the President’s head, your tires are too worn—don’t drive on them, and make sure to replace them.
Studded Tires
In Ohio, studded tires are legal from November 1 through April 15.
Know When to Use Your Lights
Headlights
Ohio law requires headlights to be on sunset to sunrise, at any time visibility is poor (rain, snow, fog, etc.), and any time the windshield wipers are in use because of precipitation.
High beam headlights can be used at any time headlights are used except when an oncoming vehicle is approaching.
Turn Signals
Use the turn signals to show intention to turn right or left, to change course of direction, or to change lanes on a multi-lane road.
Activate a turn signal at least 100 feet prior to changing direction.
Hazard Lights
Use hazard lights to increase visibility of a vehicle stopped on or near a roadway.
Driver Position: Seat and Mirror Adjustments
Adjusting the Driver’s Seat
Practice good driving posture by sitting upright with your back against the seat and feet on the floor.
Before driving, adjust the seat to have a clear view through the windshield and full control of the vehicle’s foot pedals and steering wheel, leaving appropriate space for airbag deployment.
When your seat is adjusted properly:
Your foot pivots smoothly from brake to accelerator while your heel is kept on the floor.
The top of the steering wheel is no higher than the top of your shoulders and below chin level.
There is at least 10 inches between your chest and the steering wheel to allow appropriate space for airbag deployment.
Head restraints are adjusted so the head restraint contacts the back of your head and not below the level of your ears, to avoid whiplash.
Adjusting the Mirrors
Before driving, adjust the mirrors for the best view towards the vehicle’s sides and rear.
Inside rear-view mirror: The rear-view mirror is the primary mirror for the view to the rear. Adjust so that it frames the rear window, and traffic flow to the vehicle’s rear appears in the mirror.
Outside mirrors: Properly adjusted outside mirrors reduce blind spots and provide maximum visibility to the side and rear on both sides of the vehicle. Reduce blind spots with these adjustments:
Left-side mirror:
Rest your head against the closed driver-side window
Adjust the mirror until the vehicle’s left-edge is barely visible.
Right-side mirror:
Lean to the right so your head is directly above the center console.
Adjust the mirror on the right side so that the rear edge of the vehicle can barely be seen.
This adjustment adds 12 to 16 degrees of additional viewing area to each side of the vehicle. Additionally, this allows the vehicle from the rear-view to move into the side-view mirror, and then when it leaves the side-view mirror, the vehicle is visible in the peripheral view of the driver.
Safety Restraints
Air Bags
Air bags are supplemental restraints and are designed to work best in combination with safety belts. In a crash, air bags and safety belts reduce the chance that your head and upper body will strike some part of the vehicle interior. Read your vehicle owner’s manual for specific information about the air bags in your vehicle.
Safety Belts
Ohio’s mandatory safety belt usage law requires drivers and front-seat occupants of most passenger vehicles to wear safety belts whenever they drive or ride in a motor vehicle on Ohio’s roadways.
Safety belts should be worn even if the vehicle is equipped with air bags.
Always fasten your safety belt and make sure all passengers are using safety belts or child restraints.
Drivers and front seat occupants must wear safety belts. For drivers under age 18, the number of vehicle occupants is limited to the number of safety belts originally installed and all occupants must wear safety belts.
It is important to wear the safety belt correctly:
The safety belt should be worn across bony areas (shoulders and hips).
A shoulder belt is worn across the shoulder and chest with minimal, if any, slack. Do not wear the shoulder belt under the arm or behind the back. Wearing the belt the wrong way could cause serious internal injuries in a crash.
Adjust the lap belt so that it is snug and lies low across your hips after fastening. Otherwise, in a crash, you could slide out of the belt, resulting in injury or death.
Section 3: Be Alert
Overview of the section's contents:
Vision
Fatigue
Aggressive Driving
Distracted Driving
Alcohol, Drugs, & Driving
Vision
Have your eyes checked regularly by an eye doctor.
If you complete the vision screening with corrective lenses, your Driver License will indicate a vision restriction and you must always wear your corrective lenses when driving.
Avoid using dark or tinted corrective lenses at night.
For more information about Ohio’s vision standards, refer to Ohio Administrative Code (OAC) Rule 4501:1-1-20.
Fatigue
Fatigue is physical or mental tiredness that can be caused by physical or mental strain, repetitive tasks, illness, medications, or lack of sleep.
Fatigue can affect your vision and decrease your reaction time.
Aggressive Driving
Aggressive driving occurs when an individual intentionally commits an action that endangers other persons or property.
Aggressive driving examples are speeding, following too closely, unsafe lane changes, improper signaling, and failing to obey traffic signals and warnings signs.
Distracted Driving
A distraction is anything that takes attention away from driving, whether it is physically taking your hands from the wheel, eyes away from the road, or mental activities that take your mind away from driving.
Distracted driving can result in crashes causing serious harm to you, passengers, pedestrians, or other motorists.
Avoid all types of distraction – cell phone conversations, text messaging, arguments or emotional conversations with passengers, or eating while driving. Make sure children and pets are secured properly.
In Ohio, it is illegal to drive distracted. This includes using an electronic wireless communication device.
Drivers Age 18 Years and Older
It is illegal in most cases to use, hold, or physically support a cell phone or electronic wireless communications device while driving on Ohio roads. If an officer sees a violation, they can pull you over.
The law allows drivers over 18 years old to make and receive phone calls using “hands-free” technology, and use other device features, as long as they do not hold or support the device or manually enter letters, numbers, or symbols. Drivers may only activate or deactivate their devices with a single touch or swipe.
Exceptions Include:
Reporting an emergency to law enforcement, a hospital, health care provider, fire department or similar emergency entity.
Holding a phone to the ear only during phone conversations, if the call is started or stopped with a single touch or swipe.
Holding or using cell phones or other electronic devices while stopped at a traffic light or parked on a road or highway during an emergency or road closure.
First responders (law enforcement, fire, EMS) using electronic devices as part of their official duties.
Utility workers operating utility vehicles in certain emergency or outage situations.
Licensed operators using an amateur radio.
Commercial truck drivers using a mobile data terminal.
The penalties, under the law, have been enhanced.
1st offense in two years: 2 points assessed to Driver License, up to a $150 fine. Completion of a distracted driving course can help avoid the fine and points.
2nd offense in two years: 3 points assessed to Driver License, up to a $250 fine.
3rd or more in two years: 4 points assessed to Driver License, up to a $500 fine, possible 90-day suspension of Driver License.
Fines doubled if the violation occurs in a work zone.
Drivers Under Age 18 Years
It is illegal to use any electronic device while driving, even hands-free, or while sitting at a traffic light or in a traffic jam.
Exceptions allow use for navigation device purposes, or emergency services calls.
Violation of this law is a ‘primary’ offense (a main cause for a traffic stop):
First violation: 60-days Driver License suspension and a $150 fine.
Second violation: 1-year Driver License suspension and a $300 fine.
Alcohol, Drugs, and Driving
In Ohio, it is illegal to operate a motor vehicle while under the influence of alcohol and/or drugs. Even legally prescribed or over-the-counter medication may affect an individual’s driving ability.
Effects of Alcohol and Drugs:
Vision — May cause blurred vision; reduced ability to focus; and reduced ability to judge distance, speed, and the movement of other vehicles
Reaction Time — Slows your ability to process information and respond to the driving task
Judgment — Reduces your ability to perceive surroundings and make quick decisions
To further understand the serious consequences of impaired driving, see Ohio’s crashes and crash injuries on the Ohio State Highway Patrol’s OVI Dashboard.
Section 4: Rules of the Road
Overview of the section's contents:
Speed Limits
Right-of-Way
Traffic Signals
Traffic Signs
Lane Pavement Markings
Two-Way Left Turn Only Lane
Crosswalks
Speed Limits - ORC 4511.21
Speed limits are considered reasonable speeds based on the road’s design, the expected traffic volume, and dry weather without fog or other issues further affecting visibility.
In less-than-ideal conditions (e.g., inclement weather, bad road conditions, or high traffic volumes), a reasonable speed may be slower than the posted speed limit.
A reasonable speed is necessary for a driver to maintain control of the vehicle and to bring it to a stop within an assured clear distance ahead.
Regardless of the posted speed limit, Ohio law prohibits a person from driving at a speed greater than what allows the driver to stop in the distance available.
Generally, speed limits are based on the type of road (two-lane, divided highways, etc.), and the road’s location.
Examples of Speed Limits:
Alleys within a municipal corporation: Not specified in the provided text.
School Zones during recess and while children are arriving or leaving school during normal hours of operation: Speed limit unspecified in the provided text.
Streets within a municipal corporation: Speed limit unspecified in the provided text.
State routes or through highways, except controlled-access highways within municipal corporations outside business districts: Speed limit unspecified in the provided text.
State routes within municipal corporations outside urban districts: Speed limit unspecified in the provided text.
Freeways with paved shoulders inside municipal corporations: Speed limit unspecified in the provided text.
Rural freeways: Speed limit unspecified in the provided text.
Right-of-Way
Right-of-way describes the priority of traffic flow, meaning a pedestrian or vehicle, has the right to proceed with precedence over others in a particular situation or place.
For the safety of all, yield the right-of-way to:
The driver who is at or arrives before you at an intersection.
Drivers in the opposing traffic lane when you are making a left turn.
The driver on your right at a four-way intersection if both of you arrive at the intersection at the same time.
Drivers on a public highway if you are entering the highway from a driveway or a private road.
Drivers already on a limited access or interstate highway if you are on the entrance or acceleration ramp.
Pedestrians, bicyclists, and other drivers who are still in the intersection (See Section 9 Sharing the Road).
Public safety vehicles (emergency, police, fire).
Traffic Signals – ORC 4511.13
Traffic signals are lights that tell you when to stop and go. Traffic lights are usually at intersections and are red, yellow, and green from top to bottom.
Some locations may have single green, yellow, or red lights; or the traffic lights may be horizontal instead of vertical.
TRAFFIC LIGHT COLOR / TRAFFIC MOVEMENT
RED
A red traffic light means stop before entering the intersection. You must wait behind the stop line, crosswalk, or intersection until the traffic light turns green.
YELLOW
A yellow traffic light indicates the color is about to change to red; use caution. Prepare to stop.
GREEN
A green traffic light means you may travel with caution through the intersection if it is clear to do so.
A light marked with a green arrow indicates you can turn in the direction of the arrow without stopping.
FLASHING YELLOW
Slow down and proceed with caution. Be prepared to stop for any traffic flow that may be entering the intersection.
FLASHING RED
Stop behind a stop line, crosswalk, or intersection before entering and come to a complete stop. Be sure no traffic is traveling across your path of travel before entering the intersection.
INOPERABLE TRAFFIC LIGHT
Inoperable traffic lights are treated the same as a stop sign. Yield the right-of-way and use caution while entering the intersection.
Traffic Signs
Traffic signs indicate traffic rules, hazards, roadway location, roadway directions, and the location of roadway services. The shape, color, symbols, and instruction of these signs give clues to the type of information they provide.
Prohibitory Signs
Instruct the viewer that an action is prohibited. The red circle with a slash represents the word ‘NO.’ Whenever this symbol appears on a sign, the illustrated action is prohibited.
Examples:
NO LEFT TURN
NO U TURN
NO RIGHT TURN
NO BICYCLES
Regulatory Signs
Regulate the movement of traffic. These signs give notice to travelers of traffic laws or regulations.
Examples:
ALL TRAFFIC IN THIS LANE MUST STOP ONLY IF OTHER TRAFFIC IS AFFECTED
OBSERVE POSTED SPEED LIMIT IN SCHOOL ZONE DURING RESTRICTED HOURS
USED AT INTERSECTIONS OF ONE-WAY ROADS, INDICATES A ONE-WAY ROAD BEFORE PROCEEDING
& FREEWAY EXIT RAMPS: YIELD TO ALL ONCOMING TRAFFIC
Warning Signs
Tell a driver of possible danger that might be ahead. The signs are usually yellow with black lettering or symbols and are diamond shaped.
Examples:
ROUNDABOUT AHEAD
ROAD CURVES AHEAD
DOWNHILL GRADE AHEAD
INTERSECTION AHEAD; TRAFFIC TRAVELS IN OPPOSITE DIRECTIONS
VEHICLE NEAREST THE BRIDGE HAS THE RIGHT OF WAY
PASSING IS PROHIBITED
BICYCLE CROSSING AHEAD
LIMITED CLEARANCE AHEAD
ROAD BRANCHES AHEAD
SHARP RIGHT TURN AHEAD
PEDESTRIAN CROSSING AHEAD
Guide Signs
Shapes may be square or rectangular, and colors may be green, brown, or blue. These signs provide points of interest and services along the highway, information on intersecting roads, and help direct drivers to cities and towns. Guide signs can help you find hospitals, gas stations or service stations, restaurants, and hotels.
Route Number Signs:
The shape and color of these signs indicate the type of roadway — interstate, U.S., state, city, county, or local road. Corresponding signs, distances, etc., in maps and GPS applications assist travelers in way-finding.
Work Zone Signs:
These signs generally have a distinctive orange background. Nearing a construction zone, be alert, reduce speed, follow the directions of the signs, and watch for workers and equipment on the roadway/highway.
In Work Zones, traffic may be controlled by a person with a sign or flag directing traffic. You must follow their instructions.
Barriers, such as drums and cones, keep traffic from entering closed roads or other areas where it is dangerous to drive. Give construction workers a “brake.” Be alert, reduce your speed, and be prepared to stop suddenly while approaching or traveling through Work Zones. Yield right-of-way to, and maintain a space cushion for workers or equipment on the roadway. Maintain a clear distance between your vehicle and the vehicle ahead - don’t “tailgate.” Consequences for traveling faster than the posted speed limit (“speeding”) in a Work Zone can include doubled fines and jail time.
Lane Pavement Markings
Pavement markings are lines, arrows, words, or symbols painted on the roadway. They divide lanes, tell you when you may pass other vehicles, tell you which lanes to use for turns, define pedestrian walkways, and show you where you must stop for signs or traffic signals.
WHITE LINES:
Separates traffic traveling in the same direction. White lines may be solid or broken (dashed) lines.
YELLOW SOLID LINE:
Separates traffic traveling in opposite directions.
YELLOW SOLID DOUBLE LINE:
Do not drive to the left of the center line, unless you must cross the lines to turn left or pass a slow-moving vehicle (e.g., bicycle or vehicle displaying a slow-moving vehicle sign).
YELLOW SOLID LINE WITH A BROKEN (DASHED) LINE:
Passing other vehicles is allowed for motorists traveling in the lane with the broken line. Passing is prohibited for motorists traveling in the lane with the solid line.
YELLOW BROKEN (DASHED) LINE:
Vehicles traveling in either direction may pass vehicles traveling in the same direction when safe to do so.
Two-Way Left Turn Only Lane
A two-way left turn lane is marked with a broken yellow line and a solid yellow line on each side of the lane. It is also marked with white two-way left-turn lane arrows.
The marked center lane is for left turns only. Vehicles from either direction may use the center lane immediately prior to making a left turn. This is not a lane used for traveling or passing.
Crosswalks
Crosswalks define the area where pedestrians may cross the roadway.
You must yield the right-of-way to pedestrians entering or in a crosswalk.
If there is a stop line before the crosswalk, the stop line must be obeyed.
Not all crosswalks are marked in the same way.
Section 5: Learning to Drive
Overview of the section's contents:
Starting the Engine
Moving & Stopping the Vehicle
Steering & Backing Up
Intersections & Turning
Roundabouts or Traffic Circles
Lane Travel & Changing Lanes
Entering & Exiting a Roadway
Passing
Railroad Crossings
Stopping for School Buses
Parking
Starting the Engine
Check the vehicle owner’s manual for instructions to start the vehicle.
To start the engine, place your right foot on the brake pedal and check the gear selector for park. Insert the key into the ignition and turn it, or push the Start button.
Moving the Vehicle
Move the gear selector to “D” (drive).
Check forward for a safe path and check for traffic to the sides and behind.
Signal and if safe, move your foot off the brake and to the accelerator and press gently.
Accelerate gradually and smoothly with the ball of your foot on the pedal and the heel of your foot on the floor.
Stopping the Vehicle
Check your mirrors for traffic to the rear of your vehicle.
Move your foot from the accelerator to the brake pedal. Press with steady pressure until your vehicle comes to a stop.
The distance it takes to bring a vehicle to a complete stop depends on several factors:
Driver’s reaction time
Speed at which the vehicle is traveling
The condition of the vehicle’s brakes
The condition of the pavement (wet, dry, icy, salted, gravel, etc.)
Allow 3-4 second following distance of the vehicle ahead of you.
A driver must stop:
Behind the stop line or crosswalk at any stop sign or red traffic signal before entering an intersection.
Behind the stop line or crosswalk at any red traffic signal where right or left turns on red are permitted. The driver may only proceed with a legal turn on red after coming to a full stop and yielding the right-of-way to all crossing traffic and to all pedestrians crossing the intersection.
At a flashing red traffic signal, yielding to all traffic that does not have to stop.
At a sidewalk, or if there is no sidewalk, at a point prior to entering the roadway, when emerging from an alley, driveway, or private road in a business or residential district. Drivers must yield the right-of-way to any pedestrian on the sidewalk.
Before entering an intersection if there is not sufficient space on the other side to accommodate the vehicle. The law applies whether or not a traffic signal gives a driver the right to proceed.
At the approach of a public safety vehicle (such as a police car, fire engine, or ambulance) displaying flashing lights and sounding a warning signal, unless the vehicle is traveling in the opposite direction on a divided highway. Move as far as possible to the right of the road and remain there until the emergency vehicle has passed.
Steering
Turn the steering wheel in the direction you want the vehicle to move, whether moving forward or in reverse.
Place both hands on the outside of the steering wheel on opposite sides, at the 4 and 8 o’clock positions, to maintain control of the vehicle and to avoid air bags if they should deploy.
Your grip on the steering wheel should be firm but gentle.
Backing Up
To back up your vehicle safely:
Check behind your vehicle before you get in. Children and small objects cannot be seen from the driver’s seat.
Place your foot on the brake and shift to reverse.
Grasp the steering wheel at the 12 o’clock position with your left hand. Place your right arm on the back of the passenger seat and look directly through the rear window. Use your mirrors for backing up but keep in mind that these mirrors do not show the area immediately behind your vehicle.
Utilize backup/rear-view cameras, if applicable, but don’t rely solely on the backup/rear-view camera, as it may not show the whole area.
Accelerate gently and smoothly, keeping your speed slow. Your vehicle is much harder to steer while you are backing up. Steer slightly in the direction the rear of the vehicle should move. If backing up while turning, make quick checks to the front and sides. Continue looking to the rear until coming to a complete stop.
Intersections and Turning
At all intersections, reduce your speed and search for:
Traffic control devices;
Oncoming and cross traffic, including motorcycles and bicycles - look left, right, then left again;
Pedestrians;
Roadway conditions; and
Areas of limited visibility.
Turns
When turning:
Signal your intentions.
Search all corners for traffic controls, pedestrians, other vehicles and so on.
Enter and maintain proper position in the lane that is closest to the direction you want to go.
Look through the turn to the farthest point possible along the intended path.
Accelerate smoothly to appropriate speed, make sure your turn signal is canceled, and check traffic to the rear.
Turn Signal
A turn signal must be given at least 100 feet before the intended turn. This may be accomplished by using either a mechanical signal or the appropriate hand/arm signal.
Right Turns
Avoid swinging wide to the left before making the turn.
Always turn right from the right-most portion of your lane into the right-most portion of the street you’re turning onto.
Left Turns
When making a left turn, yield to oncoming traffic.
Always turn left from the left-most portion of your lane into the lane furthest left, just to the right of the center dividing line of the street you’re turning onto. This pertains to four-lane highways as well.
Multiple Lane Turning
Identify and enter the lane from which you will turn.
Stay in that lane until the turn is completed.
Turning on a Red Traffic Signal
Right Turn on Red
You may turn right at a red traffic signal, unless a sign specifically prohibits it. When making a right turn on red, you must come to a complete stop and allow all pedestrians and other vehicles with the right of way to pass before proceeding. Remember to check for any traffic from your left and ensure the intersection is clear, as you do not have the right of way.