Untitled

CHAPTER 6: Thermodynamic Properties of Fluids

Overview

  • Chemical Engineering Thermodynamics, ChE 342
  • Focus on:
    • Property relations for homogeneous phases
    • Residual property
    • Thermodynamic diagrams and tables for thermodynamic properties
    • Generalized property correlations for gases
    • Two-phase systems

Objectives of This Chapter

  • Learn to:
    • Develop fundamental property relations from the first and second laws of thermodynamics
    • Derive equations to calculate enthalpy and entropy from PVT and heat-capacity data
    • Use diagrams and tables to determine thermodynamic property values
    • Develop generalized correlations to estimate property values in absence of experimental data

Property Relations for Homogeneous Phases

  • For a reversible process in a closed system:
    • Negligible kinetic and potential energies & no generation:
      d(nU)=dQ+dWd(nU) = dQ + dW
    • For reversible process:
    • Work:
      dWextrev=−Pd(nV)dW_{ ext{rev}} = -Pd(nV)
    • Heat:
      dQextrev=Td(nS)dQ_{ ext{rev}} = Td(nS)
  • Where U, V, S are molar properties.
  • Combining laws:
    • d(nU)=Td(nS)−Pd(nV)d(nU) = Td(nS) - Pd(nV)
    • All primary properties included: P, V, T, U, & S.
Defined Properties
  • Extensive properties derived from primary properties:
    • H=U+PVH = U + PV
    • G=H−TSG = H - TS
    • A=U−TSA = U - TS
  • Mathematical representation:
    • Enthalpy:
      d(nH)=d(nU)+Pd(nV)+VdPd(nH) = d(nU) + Pd(nV) + VdP
      With replacement, leads to:
      d(nH)=Td(nS)+VdPd(nH) = Td(nS) + VdP
  • Additional defined differentials:
    • d(nA)=−Pd(nV)−SdTd(nA) = -Pd(nV) - SdT
    • d(nG)=VdP−SdTd(nG) = VdP - SdT
Exactness of Differential Expressions
  • For function F(x,y)F(x,y):
    • Total differential:
      dF=βextdxdx+extdyextdydydF = \frac{\beta}{ ext{dx}}dx + \frac{ ext{dy}}{ ext{dy}}dy
    • If mixed partial derivatives are equal:
      βextdxβextdy=βextdyβextdx\frac{\beta}{ ext{dx}}\frac{\beta}{ ext{dy}} = \frac{\beta}{ ext{dy}}\frac{\beta}{ ext{dx}}
    • This indicates that dFdF is an exact differential.

Maxwell’s Equations

  • Application of exactness criterion leads to property relations:

    • dU=TdS−PdVdU = TdS - PdV
    • Representation for dH,dA,dGdH, dA, dG is similarly derived:
    • dH=TdS+VdPdH = TdS + VdP
    • dA=−PdV−SdTdA = -PdV - SdT
    • dG=VdP−SdTdG = VdP - SdT
  • These property relations are fundamental, assuming exactness and allowing for measurement connections.

Thermodynamic Properties from Experimental Data

  • Using Maxwell’s equations for determining properties:
    • For enthalpy:
      dH=TdS+VdPdH = TdS + VdP
    • After manipulating for specific conditions:
    • Divide by dTdT at constant PP:
      βextdT=CP\frac{\beta}{ ext{dT}} = C_{P}
    • Relation for SS:
    • Manipulation using Maxwell’s leads to expressions involving β\beta and VV.
Ideal Gas Application
  • Express properties based on ideal gas law:
    • PV=nRTP V = nRT
  • Determines changes in S and H as functions of temperature and P.

Alternative Forms for Liquids

  • Characteristics reviewed:
    • Volume expansivity: βext,Isothermalcompressibility:extkappa\beta ext{, Isothermal compressibility: } ext{kappa}
    • Relationships derived using state properties and differentials leading to expressions involving heat and entropy.

Example 6.1: Calculation for Liquid Water

  • Determine riangleH\bf riangle H and riangleS\bf riangle S for phase change at specified conditions involving:
    • Initial and final states captured through integration of heat capacities and volume expansions.

Two-Phase Systems

  • Characteristics during phase transition (e.g., between liquefaction and vaporization):
    • Gibbs energy remains constant during phase transitions.
    • Properties such as volume, enthalpy, and entropy change while Gibbs energy remains unchanged.
  • All extensive properties change, linking phase transitions with stability and equilibriums.

Clausius/Clapeyron Equation

  • Describes phase transitions relating vapor pressure and temperature change:
    • dextln(Psat)d(1/T)=−riangleHlvR\frac{d ext{ln}(P_{sat})}{d(1/T)} = -\frac{ riangle H_{lv}}{R}
  • This relation provides insights into the latent heat and its dependency on pressure-temperature relationships.
Generalized Property Correlations for Gases
  • Properties can be generalized through the use of compressibility charts.
  • Use of correlation equations (Pitzer) for calculations across states.
  • Theorem of Corresponding States establishes that fluids at the same reduced temperature and pressure behave similarly.

Example 6.9: Mixture Estimations

  • Example problem solving through use of generalized correlations;
  • Determining the enthalpy/change for specific mixtures under evaluated states.

Additional Examples

  • Further examples illustrate use of equations of states, applying detailed calculations for changes through temperatures and pressures in defined transitions.

Summary

  • Comprehensive insight into thermodynamic properties allows for understanding of various applications in chemical processes.
  • Enthalpy, entropy, specific heat, and relationships between various properties are crucial for chemical engineering and fluid mechanics.