Comprehensive Study Guide: Structure, Hybridization, Synthesis, and Reactions of Alkynes
General Properties and Structure of Alkynes
Definition and Formula:
Alkynes are unsaturated hydrocarbons containing at least one carbon-carbon triple bond ().
General Formula for Noncyclic Alkynes:
General Formula for Cyclic Alkynes:
Nomenclature Note: Alkynes are commonly referred to as Acetylenes, derived from acetylene (), which is the simplest member of the group.
Applications & Natural Occurrence:
Ethyne (acetylene) is widely used in oxy-acetylene welding torches and for the artificial ripening of fruits.
Naturally occurring alkynes are relatively rare compared to other hydrocarbon classes.
Orbital Hybridization and Bonding in Alkynes
-Hybridization Mechanism:
The orbital mixes with one orbital of a carbon atom to form two equivalent -hybridized orbitals.
The two -hybrid orbitals have large positive lobes oriented at a bond angle of to minimize electron repulsion, conferring a linear geometry.
The remaining two unhybridized orbitals lie perpendicular to each other and perpendicular to the axis passing through the orbitals.


Formation of Ethyne ():
One -hybridized orbital from each carbon atom overlaps head-on to form a carbon-carbon bond.
The second -hybridized orbital on each carbon overlaps head-on with the orbital of a hydrogen atom to form two carbon-hydrogen bonds.
The two unhybridized orbitals on each carbon overlap side-to-side with their counterparts to form two bonds.

Effect of -Character on Bond Length and Strength:
An -hybridized orbital possesses -character and -character (compared to in and in ).
Because orbitals are spherical and hold electron density closer to the atomic nucleus than orbitals, a higher percentage of -character results in shorter and stronger bonds.
Structural Comparison: Ethane, Ethene, and Ethyne

Ethyne ():
Hybridization:
Carbon-Carbon Bond Length:
Carbon-Hydrogen Bond Length:
Bond Angle: (linear)
Ethene ():
Hybridization:
Carbon-Carbon Bond Length:
Carbon-Hydrogen Bond Length:
Bond Angles: () and () (trigonal planar)
Ethane ():
Hybridization:
Carbon-Carbon Bond Length:
Carbon-Hydrogen Bond Length:
Bond Angle: (tetrahedral)
IUPAC Nomenclature of Alkynes
Basic Rules:
Identify the parent hydrocarbon chain, which must be the longest continuous carbon chain containing the triple bond.
Replace the alkane suffix -ane with -yne.
Number the parent chain from the end closer to the triple bond to assign it the lowest possible locant.
Indicate the positions of substituent groups as prefixes in alphabetical order.


Molecules Containing Double and Triple Bonds (Enyne Systems):
Number the chain from the end that gives the lower locant to either double or triple bond.
If a double bond and a triple bond are equidistant from opposite ends of the chain, prioritize the alkene for the lower locant number, though the suffix structure lists the alkene before the alkyne (e.g.,
-en-yne).


Presence of Higher-Priority Functional Groups:
When an alkyne coexists with a higher-priority functional group (such as an alcohol), the higher-priority group determines the suffix of the parent chain name and receives the lowest numbering priority.

Worked Examples:
Example A:
Parent chain: 6 carbons (hexyne).
Triple bond position: 3.
Substituents: Methyl groups at carbons 2 and 5.
Name: 2,5-Dimethyl-3-hexyne

Example B:
Parent chain: 4 carbons (butyne).
Triple bond position: 1.
Substituents: Two methyl groups at carbon 3.
Name: 3,3-Dimethyl-1-butyne

Industrial Preparation of Ethyne
From Calcium Carbide ():
Calcium oxide reacts with coke at elevated temperatures to form calcium carbide:
Hydrolysis of calcium carbide generates ethyne and calcium hydroxide:
Melting point of acetylene intermediate processes: .
From Methane ():
High-temperature partial oxidation/pyrolysis under controlled high pressure:
Laboratory Preparation of Alkynes
Dehydrohalogenation of Vicinal Dihalides
Principle: A vicinal dihalide (halogens on adjacent carbons) undergoes two successive elimination () reactions to form two bonds.
Reagents: Alcoholic potassium hydroxide () with heat accomplishes the first elimination to yield a vinylic halide. Because vinylic halides are unreactive and weakly acidic, a stronger base such as sodium amide () is required for the second elimination.
General Reaction Equations:
First Step (with ):
Second Step (with ):
Overall Two-step Elimination:



Laboratory Application Example:
1,2-Diphenylethene reacts with in to yield 1,2-dibromo-1,2-diphenylethane.
Subsequent treatment with 2 equivalents of sodium amide () yields 1,2-Diphenylethyne.

Dehydrohalogenation of Geminal Dihalides
Principle: Geminal dihalides (gem-dihalides, where both halogens are bonded to the same carbon) undergo double dehydrohalogenation to generate alkynes.
Preparation of gem-dihalides: Ketones react with phosphorus pentachloride () at to yield gem-dichlorides with the loss of phosphorus oxychloride ().

Reaction Scheme:
Cyclohexyl methyl ketone reacts with at to form a gem-dichloride ( yield).
Treatment with (1) 3 equivalents of in mineral oil with heat, followed by (2) aqueous acid workup (), yields Cyclohexylacetylene ( yield).

Dehalogenation of Vicinal Tetrahalides
Heating a vicinal tetrahalide with zinc powder in an ether solvent removes four halogen atoms to form a triple bond:

Acidity of Terminal Alkynes
Acetylenic Hydrogens:
Hydrogens attached to -hybridized carbons of terminal alkynes are weakly acidic ().
A sufficiently strong base can deprotonate a terminal alkyne to produce an alkynide anion (acetylide ion).

Orbital Stabilization Explanation:
Upon deprotonation, the unshared electron pair occupies an -hybridized orbital containing -character.
Because orbitals hold electron density closer to the nucleus, the negative charge on the carbon atom is significantly stabilized compared to ( ) or ( ) carbanions.
Quantitative Acid-Base Comparisons ( Values):
Water ():
Alcohols ():
Terminal Alkynes ():
Ammonia ():
Alkenes ():
Alkanes ():
Relative Acidity Order:
Relative Basicity Order of Conjugate Bases:

Base Selection Rules:
Sodium hydroxide () is not strong enough to deprotonate a terminal alkyne because water () is a stronger acid than the alkyne ().
Stronger bases whose conjugate acids have —such as sodium amide (, conjugate acid , ) or butyl lithium ()—are required.

Deprotonation Equations in Liquid Ammonia:
Ethyne:
Propyne:

Worked Example on Base Strength:
Problem: Acetone () has a of . Which of the following bases is strong enough to deprotonate acetone?
A) (conjugate acid , )
B) (conjugate acid , )
C) (conjugate acid , )
D) (conjugate acid , )
Solution: B) . Because ethyne () is a weaker acid than acetone (), the acetylide anion is a sufficiently strong base to deprotonate acetone quantitatively.
Reactions of Alkynide Anions (Alkylation)
Mechanism and Utility:
Alkynide anions () act as powerful nucleophiles in substitution reactions with unhindered primary alkyl halides () to form internal alkynes.
General Scheme:
Note: or (or both) may be hydrogen.

Specific Example (Synthesis of 3-Hexyne):
Yield: 3-hexyne.

Synthetic Exercises:
Problem 1: Outline a synthesis of 4-phenyl-2-butyne from 1-propyne.
Step 1: Deprotonate 1-propyne with in liquid to yield propynide anion:
Step 2: React propynide anion with benzyl bromide ():

Problem 2: Synthesize 4,4-dimethyl-2-pentyne choosing from , , , , , and liquid .
Analysis: is a tertiary alkyl halide and would undergo elimination instead of substitution if attacked by an alkynide.
Optimal Route: Start with 3,3-dimethyl-1-butyne ():

Qualitative Chemical Test: Tollens' Reagent
Distinguishing Terminal from Internal Alkynes:
Terminal alkynes react with Tollens' reagent (ammoniacal silver nitrate, ) to yield a white insoluble precipitate of silver alkynide:
Internal alkynes lack an acetylenic hydrogen and give no reaction with Tollens' reagent:

Organometallic Reagents
Grignard Reagents
Discovery: Organomagnesium halides were discovered by French chemist Victor Grignard in 1900, earning him the Nobel Prize in Chemistry in 1912.
Preparation: Prepared by reacting an organic halide (alkyl or aryl) with magnesium metal in an anhydrous ether () solvent:
Order of Halide Reactivity:
Grignard reagents are extremely reactive and are generated in situ immediately prior to use.

Acid-Base Reactions of Grignard Reagents
Grignard reagents act as exceptionally strong bases ( of conjugate alkane = ) and react quantitatively with proton donors (acids) such as water or alcohols:

Reaction of Organometallics with Terminal Alkynes
Terminal alkynes () are sufficiently acidic to undergo proton-transfer reactions with alkyl Grignard reagents or alkyllithium reagents:
Alkynylmagnesium Halide Formation:
Alkynyllithium Formation:

Hydrogenation and Reduction Reactions of Alkynes
Syn Addition of Hydrogen: Synthesis of (Z)-Alkenes (cis)
Catalytic Poisoning Concept: To stop reduction at the alkene stage and prevent full hydrogenation to the alkane, partially deactivated (poisoned) catalysts are employed.
Poisoning Agents: Sulfur, Quinoline, or Lead acetate.
Key Poisoned Catalysts:
Lindlar's Catalyst: Palladium deposited on calcium carbonate, deactivated with lead acetate or quinoline (, quinoline).
P-2 Catalyst (): Nickel boride prepared by reducing nickel acetate with sodium borohydride in ethanol:

Stereochemical Outcome: Both hydrogen atoms deliver to the same face of the triple bond ( addition), producing (Z)-alkenes (cis isomers).
Representative Reactions:
General Lindlar Reduction:
Reduction of 3-Hexyne with P-2 Catalyst:
Reduction with Poisoned Palladium on Barium Sulfate:



Anti Addition of Hydrogen: Synthesis of (E)-Alkenes (trans)
Reagents: Alkali metals (Lithium or Sodium) dissolving in liquid ammonia () or ethylamine () at low temperatures (e.g., ), followed by quenching with ammonium chloride ().
Stereochemical Outcome: Hydrogen atoms add across opposite faces of the triple bond ( addition), yielding (E)-alkenes (trans isomers).
Reaction Scheme:

Synthetic Problem:
Target: -Jasmone.
Precursor : An alkyne-containing ketone intermediate.
Transformation: Treatment of with (Lindlar's catalyst) stereoselectively reduces the alkynyl group to the cis-alkenyl chain present in -Jasmone.

Electrophilic Addition Reactions of Alkynes
Halogenation (Addition of Bromine and Chlorine)
Mechanism: Alkynes react with or in carbon tetrachloride () via electrophilic addition. Depending on stoichiometry, addition occurs once or twice.
1 Equivalent of Halogen: Yields a trans-dihaloalkene ( addition).
2 Equivalents of Halogen: Yields a tetrahaloalkane.

Examples:
Reaction of 2-hexyn-1-ol with 1 mole in at gives -2,3-dibromohex-2-en-1-ol.
Acetylenedicarboxylic acid reacts with 1 mole to give -2,3-dibromobutenedioic acid ( yield).

Hydrohalogenation (Addition of Hydrogen Halides)
Markovnikov Addition: Hydrogen halides () add according to Markovnikov's rule.
Stoichiometry:
Addition of 1 equivalent yields a haloalkene.
Addition of 2 equivalents yields a geminal dihalide (gem-dihalide), where both halogen atoms attach to the same, more substituted carbon atom.
In Situ Generation of : Acetyl bromide () and alumina in dichloromethane () can generate dry in situ.
Specific Reactions:

Anti-Markovnikov Addition of (Peroxide Effect)
In the presence of peroxides (), addition of to terminal alkynes proceeds via a free-radical mechanism.
Regioselectivity: Br attaches to the less substituted terminal carbon (Anti-Markovnikov regioselectivity).
Product: Mixture of (E) and (Z) 1-bromoalkenes ( yield).

Hydration of Alkynes and Keto-Enol Tautomerism
Oxymercuration-Hydration Overview
Alkynes undergo electrophilic hydration in the presence of aqueous sulfuric acid () and mercury(II) sulfate () as a Lewis acid catalyst.
Addition follows Markovnikov's rule: the hydroxyl group () attaches to the more substituted carbon atom.
The initial product is an enol (a vinylic alcohol), which is unstable and rapidly isomerizes into a carbonyl compound.

Keto-Enol Tautomerism
Definition: Constitutional isomers that rapidly interconvert by the migration of a proton and relocation of a double bond are called tautomers.
Equilibrium: The keto tautomer (C=O) is thermodynamically far more stable and strongly favored at equilibrium over the enol tautomer (C=C-OH).

Step-by-Step Mechanism of Mercury(II)-Catalyzed Hydration
Electrophilic Attack: The alkyne electrons attack the electrophilic ion, forming a mercury-containing vinylic carbocation intermediate.
Nucleophilic Attack: Water attacks the vinylic carbocation to form a bond, yielding a protonated organomercury enol.
Deprotonation: A second water molecule abstracts a proton from the oxonium ion, generating a neutral organomercury enol and .
Demercuration: Protonation by replaces with to yield a neutral enol.
Tautomerization: The neutral enol undergoes acid-catalyzed keto-enol tautomerization to yield the final ketone product.


Regiochemical Outcomes of Alkyne Hydration
Terminal Alkynes (): Consistently yield methyl ketones ().
Example: Hydration of 1-hexyne yields 2-hexanone ( yield).
Unsymmetrical Internal Alkynes (): Yield a mixture of two isomeric ketones because nucleophilic attack by water can occur with equal probability at either alkyne carbon.
Symmetrical Internal Alkynes (): Yield a single ketone product because both carbons are equivalent.
Example: Hydration of 4-octyne () with gives exclusively 4-octanone ().

