Geometric Optics and Reflection -Gr10 Science-
Fundamentals of Light and Geometric Optics
Light Ray Definition: A light ray is represented as a straight line with an arrow indicating the direction and straight-line path along which light travels.
Luminous Objects: Luminous objects (such as a burning candle) radiate light in all directions simultaneously. In ray diagrams, this radiation is represented by drawing multiple light rays diverging outwards from the source.
Incident Light: Light emitted from a source that strikes an object is referred to as incident light.
Geometric Optics: The branch of optics that uses light rays to model, analyze, and determine how light behaves when it strikes various objects and surfaces.
Properties and Structure of Mirrors
Composition of Mirrors: A standard mirror is an opaque object consisting of two primary components:
A front sheet of glass.
A thin backing layer of reflective silver or aluminum.
Basic Definitions:
Reflection: The process in which light bounces back after striking a surface.
Image: A reproduction of an original object produced through the behavior and manipulation of light.
Plane Mirror: A completely flat reflective surface. In ray diagrams, the non-reflective back side of the mirror is indicated using dashed or hatched lines.
Terminology and Conventions of Reflection Diagrams
Incident Ray: The ray of light coming from a light source that travels toward and strikes a reflective surface or plane mirror.
Reflected Ray: The ray of light that bounces off and leaves the reflective surface or plane mirror.
Normal Line (): An imaginary construction line drawn perpendicular ( angle) to the surface of the mirror at the exact point where the incident ray strikes.
Angle of Incidence ( or ): The angle measured strictly between the incident ray and the normal line.
Angle of Reflection ( or ): The angle measured strictly between the reflected ray and the normal line.
Measurement and Diagramming Rules:
Directional Arrows: All light rays (incident and reflected) must have arrows drawn on them showing their direction of travel.
Protractor Placement: Protractors must always be aligned relative to the normal line, as all reflection angles are measured relative to the normal line (), never relative to the surface of the mirror.
Normal Incidence: If an incident ray strikes a mirror directly along the normal line (an angle of incidence of ), it reflects directly back along the exact same path ( angle of reflection).
The Laws of Reflection and Surface Types
The Primary Laws of Reflection:
Law 1: The angle of incidence is equal to the angle of reflection ().
Law 2: The incident ray, the reflected ray, and the normal line all lie in the exact same plane and intersect at a single point on the mirror surface.
Reflection Categories:
Specular Reflection (Regular Reflection):
Occurs when light rays reflect off a smooth, flat, shiny surface.
Parallel incident light rays reflect parallel to one another.
The laws of reflection apply uniformly across the surface, producing a clear image.
Measured angle examples on specular surfaces include matching pairs such as incidence and reflection, incidence and reflection, incidence and reflection, incidence and reflection, and incidence and reflection.
Diffuse Reflection:
Occurs when light rays strike a rough, irregular, or dull surface.
Parallel incident light rays scatter and reflect in many different, unpredictable directions.
Standard ray diagram laws for specular surfaces do not apply to form a single clear image.
Locating Images in Plane Mirrors
Virtual Image Definition: An image formed by light that appears to originate from an apparent light source behind the mirror. Light rays do not actually arrive at or diverge from the true physical location of a virtual image.
Brain Projection Mechanism: When reflected light rays bounce off a plane mirror and enter the human eye, the brain projects these divergent rays backward in straight lines behind the mirror, creating the perception of an apparent light source.
Object-Image Line Method (Equal Perpendicular Lines Technique):
Light rays and reflection angle measurements are not strictly required when using this geometric shortcut.
Step 1: Draw a line connecting a point on the original object directly to its corresponding location behind the mirror (the object-image line).
Step 2: Ensure the object-image line is perpendicular () to the mirror surface.
Step 3: Measure precise equal distances: The distance from the object to the mirror surface is exactly equal to the distance from the image to the mirror surface (e.g., an object in front of a mirror produces an image behind the mirror; additional setup examples include measured lengths of and ).
Step 4: Use dotted lines for all light ray extensions and object-image constructions that extend behind the mirror plane.
Step 5: Repeat this process for multiple points across the object until enough reference points exist to outline and draw the complete virtual image.
The SALT Acronym for Image Description
The characteristics of any optical image are categorized using the acronym SALT:
S = Size: Describes the relative physical size of the image compared to the original object (Larger, Same size, or Smaller).
A = Attitude: Describes the orientation of the image relative to the object (Upright or Inverted).
L = Location: Describes where the image is positioned relative to optical reference points (e.g., behind the mirror, between focus and center of curvature, at center of curvature, or beyond center of curvature).
T = Type: Describes the physical nature of the light rays forming the image (Real image vs. Virtual image).
Standard SALT Characteristics for a Plane (Flat) Mirror:
Size: Same size as the original object.
Attitude: Upright.
Location: Same distance behind the mirror surface as the object is in front of it.
Type: Virtual image.
Images in Converging (Concave) Curved Mirrors
Optical Elements and Terminology:
Principal Axis (): The horizontal reference line drawn perpendicular to the center of the curved mirror surface.
Center of Curvature (): The center point of the spherical surface from which the mirror curvature is formed.
Focus (): The focal point positioned along the principal axis between the mirror surface and the center of curvature . For concave mirror surfaces, is located in front of the reflective surface.
Concave Mirror Image Characteristics Across Object Locations:
Location 1: Object Located Beyond
Size (): Smaller
Attitude (): Inverted
Location (): Between and ()
Type (): Real
Location 2: Object Located Exactly at
Size (): Same size
Attitude (): Inverted
Location (): Exactly at
Type (): Real
Location 3: Object Located Between and
Size (): Larger
Attitude (): Inverted
Location (): Beyond
Type (): Real
Location 4: Object Located Exactly at
Size (): No image formed / No clear image
Attitude (): No image formed
Location (): No image formed
Type (): No image formed (No SALT characteristics apply)
Location 5: Object Located Inside (Between and the Mirror Surface)
Size (): Larger
Attitude (): Upright
Location (): Behind the mirror
Type (): Virtual
General Positioning Trend: As real images shift closer to the focal point or mirror along the principal axis, the image size changes systematically; as the real image distance decreases relative to reference points, its scale reduces.
Homework Assignments and Practice Problems
Day #1 Assigned Homework:
Section 11.4: Page 481, Questions #1, 3, 4, 5.
Section 11.6: Page 486, Questions #1, 2, 3A, 4A, 4B, 5.
Section 11.7: Page 493, Questions #1, 2, 4, 5.
Day #2 Assigned Homework:
Light-Reflection Worksheet.