rpm notes
Module I: Introduction to Rapid Prototyping and Stereolithography Systems
Introduction
Manufacturing's importance is recognized across society.
It impacts GNP, trade, and employment.
India's manufacturing is changing due to technology and globalization.
Industries must be competitive.
Awareness of manufacturing trends is crucial.
Rapid Prototyping (RP) converts CAD data into real objects.
Manufacturing Processes: Recent Developments
Three classes:
Forming: Shaping material by deformation (plastic deformation or liquid shaping).
Removal: Machining to remove excess material.
Joining: Welding, brazing for fabrication.
Forming is primary; machining is secondary for finish and accuracy.
Machining provides:
Better finish and accuracy.
Geometric complexity.
Force/power independent of work size.
Unaffected material properties.
A fourth class: 'material increase' or 'material grow' processes.
These add material gradually through binding or solidification.
This is as significant as numerical control and non-traditional machining.
Terminologies are still evolving; 'generative manufacturing processes' (GMP) is used.
GMP is 'free-form' manufacturing from computerized data.
Figure shows classes of manufacturing processes.
Joining involves component assembly.
Others are classified by shape generation (material conservation, removal, addition).
Figure indicates the product development cycle stages and prototypes involved.
Design model: appearance and ergonomic analysis.
Geometric prototype: dimensional features, accuracy, tolerances.
Functional prototypes: functional principle and parameter optimization.
Technical prototypes: material and processes match the final product.
First series: limited production and marketing.
Rapid Prototyping
Concurrent Engineering (CE) requires quick prototype development.
RP enables quick and inexpensive prototype fabrication.
RP produces objects from CAD data without human intervention.
Conventional methods are unsuitable.
New processes shape objects directly from CAD.
Some RP techniques are developed, others are in R&D.
RP cycle begins with CAD design and can be repeated.
Two RP types:
Direct prototype formation.
Mould creation (due to material limitations).
Research aims for metallic component RP for functional prototypes.
Terminologies vary; 'generative manufacturing processes (GMP)' is used for processes that produce solid parts from CAD data directly.
Other names: 'free-form manufacturing processes', 'material incress manufacturing', 'material grow manufacturing'.
In GMP, shape is achieved by material addition without tools.
CAD model is split into layers.
Slice thickness and direction vary.
Distance between slicing planes () equals layer thickness during generation.
Figure illustrates the basic principle of generative manufacturing.
Different processes have been developed for solid object generation.
The general procedure obtains components from a CAD file as in Figure 1.3.
Steps Involved in RP
Current GMP builds use slicing.
Direct 3D building is under consideration.
This eliminates the need for thin layers and lower part generation.
It enhances shape creation freedom but increases programming burden.
Figure shows rapid product development using RP.
Conventional and new design procedures are indicated.
CAD data is converted to prototype components.
RP-produced parts are rarely direct prototypes; they're used as patterns.
'Follow up technology' is used for prototype creation.
After prototype study, design modifications are suggested.
Redesign is carried out by 'reverse engineering'.
Data from reverse engineering feeds the CAD database for iteration.
An acceptable prototype undergoes analysis and valuation; further modifications may occur.
The key is successful CAD data conversion into a solid object.
Generative manufacturing processes are crucial.
General Features and Classification of GMP or RP
GMPs don't fit traditional manufacturing concepts.
GMP's are amenable to computer control.
Conventional processes face difficulties in flexible automation.
GMPs 'create' material where needed.
Materials are mostly non-metallic, limiting functional use.
These techniques are primarily for prototyping.
Research aims for functional component materials.
Desktop manufacturing will be possible in the near future.
Table presents advantages over conventional methods.
Classification is based on:
Material creation/solidification.
Shape generation.
Processes are in various stages of development.
The state of material can be liquid, solid, or powder.
Table shows possibilities and classifications by raw material state.
Liquid photopolymers were the starting point and are well-developed.
Solid material processes are few and limited to thin foils.
Table 1.3 shows shape generation techniques:
Direct 3D or layer-by-layer.
Layers can be agglomerations or simultaneous.
Solidification of liquid polymer uses 2D layer-by-layer.
Lower layers are created first.
Solid layers are created by scanning and solidifying point-by-point or line-by-line.
Direct 3D doesn't require lower layers, offering flexibility, but increased programming.
In direct 3D, surfaces are created at once or point-by-point.
Issues Related to CAD and GMP Software
Modeling
Computer representation and accuracy are significant.
RP systems use 3D surface or solid models.
The STL format is a de facto standard for RP technologies.
It uses a mesh of connected 3D triangles whose vertices are ordered (Figure 1.5).
Many triangles are needed for accurate representation.
Correct vertex orientation represents object material (Figure 1.6).
Slicing uses ray-tracing at a particular -level.
Cross-sections form closed paths.
Cross-hatching algorithms speed up material development.
Object orientation optimizes time and accuracy.
Software for slicing and control is specific to the GMP system.
A new file (SLI) pilots processing unit movements (Figure 1.7).
CAD resolution depends on desired accuracy.
Smaller deviation increases file size and slice time.
Scaling accounts for shrinkage.
Smallest feature size depends on the RP process and beam diameter (0.175 mm to 0.3 mm).
Considerations for Part Orientation
Orientation influences build time, resolution, and finish.
Curved surfaces have higher resolution when horizontal.
'Stair-step' appearance is avoided by proper orientation (Figure 1.8).
Multiple layer thicknesses are feasible for curved surfaces.
Thinner layers reduce the 'stair-step' effect.
Orientation affects trapped volume (liquid-based GMP's).
Correct orientation eliminates volume issues (Figure 1.9).
Slicing
The slice program converts the STL file into 2D cross-sections.
The slice axis is normal to the slicing plane and is the build direction.
Slice thickness affects texture, accuracy, and build time (0.0625 mm to 0.75 mm).
Thicker layers don't always reduce build time; scanning speed is affected.
The range of 0.125 mm to 0.25 mm is optimum (Figure 1.10).
Internal Hatching and Surface Skin Fills
Internal hatching reduces build time by solidifying the area inside the outer boundaries.
Boundary lines are created first, then the interior is criss-crossed.
The Tri-Hatch pattern uses parallel lines at 0°, 60°, and 120° with 0.625 mm spacing (Figure 1.11).
WEAVE™ pattern has parallel lines to the x- and y-axis with 0.28 mm spacing.
WEAVE™ reduces trapped liquid and curl distortion.
Skins are created by skin fills with closely spaced scan lines (0.0762 mm to 0.127 mm).
WEAVE™ reduces the importance of skin fills.
Support Design
Slicing creates isolated islands (Figure 1.12).
Supports prevent their fall under gravity and for long cantilevered projections.
Supports in GMP are analogous to job holding devices for conventional machining.
Supports hold the main part body.
Figure 1.13 shows different types of supports.
Stereolithography
It is the first, common, and investigated GMP.
Stereolithography uses UV laser beam curing of liquid photopolymer.
Photo-Polymer Chemistry
Photo-Polymerization is a light-based process requiring:
Monomer
Photo-initiator
Reaction terminator
The Monomer and photo-initiator creates the initial liquid resin.
Light activates the photo-initiator, which decomposes into radicals.
Radicals react with monomer chains to form larger chains.
The reaction stops with oxygen binding.
Oxygen presence is essential for controlled solidification.
Process Details
Generating vat contains UV-sensitive liquid photopolymer.
An elevator platform is driven vertically.
A UV laser beam is reflected by mirrors onto the liquid surface.
Computer controls mirror movement to generate the first layer.
The beam cures the liquid by photopolymerization to a depth equal to layer thickness.
The platform lowers, and the cycle repeats.
Ultrasonic cleaning removes excess material; alcohol bath is used for waste removal.
Post-curing uses intense UV radiation to solidify the trapped liquid.
Solidification occurs point-by-point or line-by-line.
Voxels (volume picture cells) get solidified (Figure 1.2).
Voxel size ensures connection with neighbors (Figure 4.2).
Low-power lasers use point-to-point NC control, using mirrors.
Laser-Induced Polymerization
Polymerization starts by:
Reproduction of entire layer by a smaller-scale mask with powerful UV light.
Exposure to a laser beam that "writes" contours into the resin surface.
Depth of Cure Track:
Polymerization depends on photons passing through the resin.
The gel point transforms resin from liquid to solid.
Surface energy is the maximum energy affecting the resin surface:
With:
* = Surface energy on the surface at * = average laser-performance
* = speed of the laser beam
* = hatch widthAbsorption follows the Beer-Lambert equation:
With:
* = Surface energy in depth z. * = Surface energy on the surface at z=0
* = optical penetration depth of the resin.Cure depth is given as:
With the first relationship, it follows:
The curve is dependent only on the resin constant and is also called a working curve.
Curve Track Counter
Coordinate system for track geometry:
Gaussian beam intensity and laser performance:
Surface energy at a specific point on the section (y, z = 0):
The result is a parabola.
Layer Thickness Optimization:
The minimum of the function is for an assumed optical penetration depth .
If resins with a greater optical penetration depth are used it should be taken into account -
especially in combination with higher powered lasers. It is also influences the stability of the
components.Effect of the penetration depth and stability of the component
Value excess energy: (9)After implementing equation:
(10)
The excess energy is directly proportional to the critical energy .Advantages of Stereolithography
Minimal land widths.
Tenuity of the z-stepping flexibility.
Possibility to contour the boundary.
Production of internal hollow spaces.
Medicinal use (e.g., mandible, mandibular nerve channel).
Complex model assembly from single partial models.
If the same photosensitive resin is used as a binder & UV radiation sources for local curing.
The model can be finished by sand blasting and polishing and, to a certain extent, machining.
Non-cross-linked monomers can be reused.
Disadvantages of Stereolithography
Restricted to photosensitive material.
Stereolithography is in principle a two-stepped process.
The green product must be cleaned with solvent (TMP, isopropanol). This requires the
storage, handling, and disposal of solvents.
*Photosensitive acrylates absorb oxygen, whereas epoxy resins are hydroscopic.
Module II: Selective Laser Sintering, Fusion Deposition Modeling, Solid Ground Curing, and Laminated Objection Manufacturing
Selective Laser Sintering (SLS)
History
Developed by The University of Texas at Austin, commercialized by DTM Corporation in 1987.
Technology
Additive fabrication using powder fused by a carbon dioxide laser.
Uses .STL CAD files.
DTMView software imports, orients, and scales files.
Auto-nesting (Sinterstation 2500) optimizes part placement.
Build piston lowers as parts are grown.
Powder is spread by a roller from feed pistons.
The laser cures cross-sectional areas.
Figure shows the build chamber.
The build media is a cake of powder.
Excess powder is removed manually at the Break Out Station (BOS).
BOS includes air handling and a sieve for powder recycling.
Some materials require additional finishing (grit blasting, sanding, drilling, coating).
The purpose is to provide a prototyping tool to reduce time and cost.
SLS is marketed for conceptual models, functional prototypes, pattern masters, and rapid tooling.
Current State
High-quality product line (Sinterstation).
Advantages: wide range of build materials, high throughput, self-supporting build envelope.
Disadvantages: initial cost, peripherals, facility requirements, maintenance costs.
Advantages
Wide Range of Build Materials
10 main build materials, grouped into modules:
Casting Module:
Polycarbonate material.
TrueForm Acrylic-styrene polymer.
Cast Form- Foundry friendly.
SandForm Zr II and Si - Direct Zircon and Silica foundry sands with accuracy maintains 0.020".
Functional Prototyping Module:
DuraForm for detailed concept models.
Proto Form and Somos 201.
Rapid Tooling Module:
RapidSteel polymer-coated 1080 carbon steel powder and infiltrated in a furnace with copper to produce short-run tooling for preproduction plastic injection molding.
Copper Polyamide produces directly usable soft tooling.
High Throughput Capability
Scanning speed.
3D part nesting.
Large build envelope (15" X 13" x 16.7").
Self-Supporting Build Envelope
Disadvantages
Initial Cost of the System
$250,000 to $380,000 plus facility modifications.
Peripherals and Facility Requirements
BOS Table.
Air handler and sifter.
Glass-bead blaster.
Hydrogen Lindbergh furnace.
240V/70A power, 200 sq ft, 6,275 pounds.
Maintenance and Operation Costs
Maintenance contracts.
Powder storage and recycling.
Power consumption, inerting gases, build materials.
Impact of the Technology
Significant impact on the prototype manufacturing industry.
The RapidSteel metal build material leads to significant advances in the future.
Interrelation with Other Technologies
Future of the Selective Laser Sintering Technology
The possibility of Making metal and ceramic materials near the future.
Possible application on lunar or Mars surfaces.
System Update
DTM Corp. has released the Sinterstation 25QQplus, along with a Windows NT® software.
Key Terms
Self-supporting envelope.
Multiple build materials.
Three-dimensional part nesting.
Fused Deposition Modeling (FDM)
Description
Extrusion-based RP processthat use additive fabrication method.
Uses STL data and multiple build materials.
Developed by Stratasys, Inc. used for creating casting masters and use for prototyping.
Fused Deposition Modeling System Hardware
Several models are available that can build in multiple sizes.
Software: QuickSlice (QS) software, manufactured by Stratasys and SDRC.
Build materials: investment casting wax, acrylonitrile butadiene styrene (ABS) plastic Medical Grade, and Elastomer that come in filament form, 0.070 inches in diameter and rolled up on spools.
Extrusion Head
The extrusion head:
Drive blocks are the raw-material feeding mechanisms.
Heating chamber Changes the direction of the filament flow and serves as a melting area for the material.
Tipsare used to reduce the extruded filament diameter. Openings such as 0.012 and 0.025 inch sizes.
Build Substrate: the foam substrate is about one-inch thick pins help stabilize during building.
Fused Deposition Modeling Operation
Computer Aided Design File Preparation
STL files converted to machine language. QS software is used that displays the cartesian coordinates.
Part Size
The part will fit into the bounding box, if sectioned it will be built separately.
Orientation/Positioning
Slicing
The soft operation Creates thin horizontal cross sections of the STl that will create command code for the machine the typical slice is 0.005 and 0.015 inches.
Build Parameters
Optimized build parameters are default. They decrease build time, amount of material requires for the build.
Sets:
It contains all the build instructions for a selected set of curves in part.
Road Width
the width of the ribbon of molten material that is extruded from the tip.
Fill Spacing
Is the distance left between the rasters or contours that make up the interior solids of the part.
Creating and Outputting Roads
Data is written out as an SML file.
Getting a Build Time Estimate
QS has a very good build-time estimator.
Building a Part
The software setup requires most of the operator's time.
Finishing a Fused Deposition Modeling Part
Finishes the FDM parts feature a Break Away Support System (BASS).
Uses of Fused Deposition Modeling Parts
Concept/desig visualization.
Direct-use components.
Investment casting.
Medical applications.
Flexible components.
Fused Deposition Modeling Materials Properties
Investment-casting wax, ABS, Medical Grade ABS, Elastomer. Mechanical properties of FDM build materials are in Figure 2.16.
Advantages and Disadvantages
Strength and temperature capability of build material.
Safe, laser-free operation and easy postprocessing with the new water-soluble support material.
Lack of build speed is a key disadvantage.
Key Terms
Extrusion head.
Drive blocks.
Raster fill spacing.
Slice thickness.
Water-soluble support.
Build substrate.
Road width.
Laminated Object Manufacturing (LOM)
Description
Technique that produces three-dimensional models with paper, plastic, or composites.
Helisys, corp. in Torrance, CA.
A hybrid between subtractive and additive processes.
Fastest RP process when cross-sectional areas are larger.
System Hardware
LOM system is currently available in two sizes: the LOM 1015 and the larger LOM2030.
Parts built with LOMPaper generally have a wood-like texture and appearance.
Material requirements are the LOMSlice™ software that provides interface.
The LOM has a feed spindle and a take-up spindle that will operate with multiple operations.
The laser helps the material cut effectively.
Laminated Object Manufacturing Operation
Software
The LOM must begin with the standard RP computer file, or the STL file.
Part Orientation
The designer helps with the designed shape of the parts for the LOM to build.
Crosshatching
Crosshatching will remove excess paper from individual layers.
System Parameters
The designer sets new parameters every time the LOM is setup as each design part requires different shapes.
Laminated Object Manufacturing Build Technique
All hardware and software function properly on the LOM system.
Finishing a Laminated Object Manufacturing Part
Finishing parts will require wood chisels to remove support, or additional wood working tools to shape.
Typical Uses of Laminated Object Manufacturing
The LOM parts have relatively good handling strength, but the parts are used for concept verification to test prototypes.
Advantages and Disadvantages
LOM advantage is to produce larger-scaled models, but the LOM can be more durable with extra features to consider.
Laminated Object Manufacturing Materials Properties
LOM models holds dimensional tolerances of about + 0.010 inches.
Key Terms
Laminated Object Manufacturing (LOM).
Slice-on-the-fly.
Crosshatching.
Laser power.
Heater speed.
Compression.
Support base.
Adhesion step.
Nesting.
Support wall.
Decubing.
Solid Ground Curing (SGC)
Whole layers are simultaneously cured according to the required cross section to limit the UV radiation exposure and toner from a photocopying unit.
The required cross section is finished, the pattern from the glass mask is erased for the next layer and the composite cross selection of each layer is generated.
Also known as light Sculpting.Advantages of GMPs include its integration with computer control, its capability to generate specific shapes, generation of composite parts and assemblies, and economic advantages. Since some processes create no toxic pollution. It can be deemed clean and recyclable design processes.
Considerations for Adopting RP Technology
Specific advantages by looking at geometric structure, economical benefits, material and finish and accurate testing material.
Module III: Concept Modelers and Rapid Tooling
Concept Modelers
*Concept modelers, often called office modelers, are a class of rapid prototyping (RP) system Designed to make models inexpensively, without a great deal of effort.
Multi Jet Modeling / ThermoJet Printer
The Multi jet modeling has capabilities with 96 jets for the Actua 2100 and capabilities of over 300 on the ThermoJet
System Software
*Utilizes user friendly interface where inputs are minimally required.
*Software is defaulted with automatic slicing and operating capabilities.
Build Technique
Parts are built by printing thin layers with wax to build most of the structure up.
Post Processing
Post processing is simple as you will need to have the parts cool, then simple sanding and or peeling to remove all the structures.
Typical Uses
*These can be used in investment casting due to the wax material.
Advantages
*High accuracy of deposition of droplets therefore low waste. Easy to use No warm up time
*Low cost It has the ability to produce extremely fine resolution and surface finish essentially equivalent to CNC machine.
Disadvantages
*Support material is required Not good for high volume printing Print head is less durable, prone to damageVery slow for large object.
*Materials are limited to only polymers and waxes Printing speed is not as fast as laser printers
Applications
*Coding and marking Used for making jewellery and for casting patterns Wall covering, furnishing and laminatesPackaging and label decorations Printed electronics Book printing
3D Printing (Z402 System)
*Uses liquid bind jetting to powder in MIT process which creates physical parts from computer data.
System Hardware
*Can make small models in small sizes.
*There is a build and feed piston Powder overflow system. Binder feed/take- up system.
*Software operation is very user friendly and the systems have powder bed so the support structures are not required.
Z402 Operation
Software
Provides graphic visualization, translation, copies of parts, and rotation with easy software configurations.
Build Technique
*The pistons are moved and the build is automatically operated.
Postprocessing
*The parts require a paraffin to strengthen.
Uses of Z402
*Uses is a concept- verification models, but the models are typically used in investment or sandcasting patterns.
*This model will provide the high speed, ease of operation, material cost, but cleaniness and rough parts.
Genisys System
*Models are a system that is easy to use and has limited moving parts/pieces, with a durable build to make products with durable polyester material.
HP system-5
The JP system has steps that need to occur sequentially.
Objet Quadra
*Objet geometries also uses inkjet to create photopolymer.
*The system can provide 600 DP1, resolution and builds the materials effectively.
Laser Engineered Net Shaping (LENS)
*Was developed with Sandia, LENS, has metallic metal that have very detailed high definition in components.
*Current materials: stainless steel.
*The STL Is downloaded from the bottom.
Deposition Head
Metal powder is directed over a laser to inject. the part with metal.