Introduction to Physics, Units, Measurement, and Coordinate Systems
Physical Models, Scientific Method, and Measurement Systems
Physical Models in Physics:
- Physics frequently utilizes multiple models to describe a single physical phenomenon depending on required precision and context.
- Simpler models are often preferred when sufficient for a given scenario, whereas more complex models are necessary when precise parameters are required.
- Falling Object Example: Newtonian gravity is fully sufficient for describing a rock falling and hitting the ground.
- Satellite/GPS Example: Newtonian gravity lacks the necessary accuracy for Global Positioning System (GPS) technology and satellite calculations; Einstein's theory of gravity, known as General Relativity, must be utilized instead.
Scientific Method Assessment Requirements:
- An upcoming lab assessment requires students to list and describe the four steps of the scientific method in detail.
- The assessment fulfills a General Education Requirement (GER) for science courses.
- A perfect execution of this assessment earns points toward the overall laboratory grade.
Systems of Units:
- Historical unit systems and their evolution are documented on informational posters in Lab Room 08.
- The primary system employed in physics is the SI System (Système Internationale / International System of Units), which is a metric system.
- While scientific work predominantly relies on the SI system, non-metric imperial units (such as United States customary units) occasionally appear in problems.
Standard Metric Prefixes:
- Milli-: Denoted by lowercase , representing (or ).
- Centi-: Denoted by lowercase , representing (or ).
- Kilo-: Denoted by lowercase , representing (or ).
- Mega-: Denoted by capital , representing (or ).
- Scientific notation is required knowledge for performing calculations involving these metric prefixes.
Fundamental and Derived Quantities in Physics
Fundamental Quantities (Base Quantities):
- Physical quantities are standardized measurements created to analyze the physical universe, which consists entirely of matter and energy.
- Fundamental quantities are independent, basic quantities that do not rely on or derive from other physical quantities.
- Three Fundamental Quantities in Physics 1:
- Distance (or Length): Measured primarily in meters (abbreviated as ).
- Mass: Measured primarily in kilograms (abbreviated as ).
- Time: Measured in seconds (abbreviated as ).
Subsystems of the Metric/SI System:
- MKS Subsystem: Uses the Meter, Kilogram, and Second as base units. This serves as the default system for Physics 1.
- CGS Subsystem: Uses the Centimeter, Gram, and Second as base units.
United States Customary System (Imperial System):
- Distance: Measured in feet (plural) or foot (singular).
- Mass: Measured officially in slugs.
- Force: Measured in pounds ().
- Mass vs. Weight Distinction: A pound is a unit of gravitational force, not mass. A bag of flour purchased at Kroger experiences pounds of downward pulling force from Earth's gravity. If taken to the International Space Station, the pulling force decreases, but the mass (the quantity of slugs) remains completely unchanged.
- Time: Measured in seconds ().
- Historical Context: Attempted federal mandates to shift the United States completely to the metric system occurred during the late 1970s, though the US customary system remains widely used today.
Derived Quantities:
- Quantities that combine fundamental base quantities are defined as derived quantities.
- Speed: Defined as distance divided by time (), making it a non-fundamental derived quantity.
- Force: Measured in the SI unit Newton ().
- Equivalency: ().
- Expressed fundamentally as: .
- Energy: Measured in the SI unit Joule ().
- Equivalency: ().
- Power: Measured in the SI unit Watt ().
- Equivalency: ().
- Additional Fundamental Quantities in Advanced Physics: Electric current (measured in Amperes) and luminosity (measured in Candelas).
Unit Conversions and Physical Standards
Physical Standards of Measurement:
- Standard Meter: Historically defined by a physical prototype metal rod. To prevent thermal expansion variances, it is modernly defined as the exact distance light travels through a vacuum in a precise fraction of a second.
- Standard Kilogram: Historically defined by a platinum-iridium cylinder standard kept in Paris. Modernly defined based on precise universal atomic constants.
- Standard Second: Defined via atomic clocks measuring the exact number of radiation oscillations from a cesium atom.
Dimensional Analysis and Conversion Methodology:
- Conversions are performed via sequential unit cancellation using fractional conversion factors.
- Speed of Light Example:
- Speed of light in free space/vacuum (): .
- Found in mass-energy equivalence: .
- Conversion to kilometers per year requires multiplicative fractions:
- Distance conversion factor: .
- Time conversion factors: .
Kinematics Framework and Coordinate Systems
Describing Motion:
- Kinematics seeks to describe positional changes relative to time without initially addressing the physical forces causing those changes.
- Rigid Object Assumption: Physical objects are assumed to be non-deformable (rigid, non-flexible structure). Locating a single reference point on a rigid object completely dictates the spatial translation of the overall object.
Establishing Reference Frames and Origins:
- Defining position requires a specified reference origin ( or ).
- Spatial position cannot be defined without an explicit reference frame.
Dimensional Coordinate Systems:
- The physical universe operates in three spatial dimensions ().
- Rectangular (Cartesian) Coordinates:
- Uses mutually perpendicular axes designated as , , and (represented by the perpendicular symbol \text{\perp}).
- Requires three numerical values to locate a point in space.
- Physics 1 prioritizes one-dimensional () and two-dimensional () motion.
- Spherical Polar Coordinates ():
- Defines spatial position using one radial distance and two rotational angles.
- Polar Coordinates ():
- Defines position in a plane using one radial distance () and one rotational angle ().
Vectors, Scalars, and Positional Representations
Two-Dimensional Positional Representations:
- Cartesian Component Model: Position expressed as , where values can be positive or negative based on quadrant displacement from the origin.
- Polar Component Model: Position expressed as .
- Reference Axis: Standard convention measures angle starting from the positive x-axis.
- Directional Sign Convention: Counterclockwise rotation around the origin denotes a positive angle direction ().
- Magnitude: Defined by the radial length variable extending straight from the origin to the target position.
Categorization of Physical Quantities:
- Scalar Quantities:
- Physical quantities possessing magnitude (size) only, lacking spatial direction.
- Example: Time (measured in seconds, ).
- Vector Quantities:
- Physical quantities possessing both a magnitude (how far / size) AND an explicit spatial direction.
- Example: Position, velocity, force.
- Polar Representation: Explicitly displays magnitude () and direction ().
- Cartesian Representation: Implicitly encodes overall magnitude and direction within perpendicular displacements ().
- Scalar Quantities: