Comprehensive Study Notes on p-Block Elements: Groups 13 and 14
General Characteristics of p-Block Elements
Definition and Electronic Configuration:
In -block elements, the last electron enters the outermost orbital.
A set of orbitals contains three degenerate orbitals and can accommodate a maximum of six electrons.
Consequently, there are six groups of -block elements in the periodic table, spanning Groups 13 to 18.
The group head elements are Boron (Group 13), Carbon (Group 14), Nitrogen (Group 15), Oxygen (Group 16), Fluorine (Group 17), and Helium (Group 18).
The general valence shell electronic configuration of -block elements is (with the exception of Helium, which has a configuration).
The inner electronic core varies across periods, heavily influencing atomic radii, ionic radii, ionization enthalpies, and overall chemical physical characteristics.
Oxidation States and the Inert Pair Effect:
The maximum oxidation state shown by a -block element (often called the group oxidation state) equals the total number of valence electrons (sum of and electrons).
Additional oxidation states are commonly observed, typically differing from the group oxidation state by units of two.
In Groups 13, 14, and 15, the group oxidation state is the most stable for the lighter elements.
For heavier elements in these groups, oxidation states two units lower than the group oxidation state become progressively more stable due to the inert pair effect (the reluctance of the valence electron pair to participate in bonding due to poor shielding by intervening and orbitals).

Metallic and Non-Metallic Trends:
Non-metals and metalloids exist exclusively within the -block of the periodic table.
Non-metallic character decreases down each group, making the heaviest element in each group the most metallic.
Non-metals exhibit high ionization enthalpies and high electronegativities, causing them to form anions, whereas metals form cations.
Highly reactive non-metals combine with highly reactive metals to form ionic compounds due to large electronegativity differences. Combinations between non-metals yield covalent compounds.
Non-metal oxides are acidic or neutral, whereas metal oxides are basic.
Anomalous Properties of First-Row p-Block Elements:
First members of each group differ from heavier members due to:
Exceptionally small atomic size and high electronegativity/ionization enthalpy.
Absence of orbitals in the second period, limiting their maximum covalence to (using one and three orbitals). Third-period elements and below utilize vacant orbitals to expand their covalence beyond (e.g., Boron forms only whereas Aluminium forms ).
Strong ability to form multiple bonds with themselves (e.g., , , ) and with other second-row elements (e.g., , , , ). Heavier elements form weaker bonds involving higher-energy orbitals ( or ).
Group 13 Elements: The Boron Family
Occurrence and Abundance:
Group 13 comprises Boron (), Aluminium (), Gallium (), Indium (), and Thallium ().
Boron is a fairly rare element ( by mass in Earth's crust). It occurs mainly as orthoboric acid (), borax (), and kernite (). In India, borax is found in Puga Valley (Ladakh) and Sambhar Lake (Rajasthan). Boron has two stable isotopes: () and ().
Aluminium is the most abundant metal and third most abundant element in Earth's crust ( by mass), behind Oxygen () and Silicon (). Major minerals include Bauxite () and Cryolite (). Found in India as mica in Madhya Pradesh, Karnataka, Odisha, and Jammu.
Gallium, Indium, and Thallium occur in very low abundances.
Electronic Configurations:
General outer electronic configuration:
Boron ():
Aluminium ():
Gallium ():
Indium ():
Thallium ():

Atomic Radii Anomaly:
Atomic radius generally increases down a group, but Gallium () has a smaller atomic radius than Aluminium ().
Explanation: Gallium contains intervening electrons which exert poor nuclear shielding. Consequently, the outer electrons experience a higher effective nuclear charge, pulling the electron shell inward.
Ionization Enthalpy Trends:
Ionization enthalpy does not decrease smoothly down the group.
Discontinuities exist between and , and between and , driven by poor shielding effects of inner and electrons.
Ionization enthalpy order: .
Electronegativity:
Electronegativity decreases from () to (), then increases slightly through (), (), and () due to structural anomalies in atomic size.
Physical Properties:
Boron is a non-metal, extremely hard, black solid existing in multiple allotropic forms. It has an unusually high melting point () due to its strong crystalline lattice.
Other members are soft metals with high electrical conductivity. Gallium has a remarkably low melting point () and remains liquid during summer, combined with a high boiling point (), making it ideal for high-temperature thermometry.
Density increases down the group from () to ().
Chemical Reactivity and Oxidation States:
High combined ionization enthalpy () forces Boron to form only covalent compounds.
Aluminium easily loses three electrons to form and is highly electropositive.
For , , and , both and oxidation states are observed. The relative stability of the state increases down the group ().
In Thallium, is predominant and stable, whereas acts as a powerful oxidizing agent.
Compounds in the state are more ionic than those in the state.
Trivalent molecules (e.g., , ) contain six valence electrons around the central atom, behaving as Lewis acids (electron pair acceptors).
readily accepts an electron pair from ammonia to form an adduct:
Aluminium chloride achieves stability by dimerizing into via halogen bridge bonds:

Reactivity Towards Air:
Crystalline boron is unreactive. Aluminium forms a protective oxide surface film.
Amorphous boron and aluminium heat in air to yield trioxides () and nitrides ():
Oxide nature changes down the group: is acidic; and are amphoteric; and are basic.
Reactivity Towards Acids and Alkalies:
Boron is resistant to non-oxidizing acids and alkalies.
Aluminium dissolves in mineral acids and aqueous alkalies (amphoteric):
Concentrated nitric acid () passivates aluminium by forming a protective oxide surface layer.
Reactivity Towards Halogens:
Elements form trihalides () with halogens (), except :
Trichlorides undergo hydrolysis in water to give tetrahedral species ( hybridized).
Acidified aqueous aluminium chloride forms the octahedral ion ( hybridized).
Problem Solutions:
Problem 11.1: Standard electrode potentials and . Predict formation of in solution and compare electropositivity.
Solution: Standard electrode potentials show Aluminium has a strong thermodynamic tendency to form stable ions (). Conversely, is unstable in solution and acts as a strong oxidizing agent, converting to . Thus, Aluminium is significantly more electropositive than Thallium.
Problem 11.2: White fumes appear around a bottle of anhydrous aluminium chloride.
Solution: Anhydrous undergoes partial hydrolysis with atmospheric moisture to release gas. Moist fumes appear white.
Problem 11.3: Boron is unable to form ion.
Solution: Boron lacks orbitals in its valence shell () and cannot expand its octet beyond a maximum covalence of .
Important Compounds of Boron
Borax ():
White crystalline solid containing tetranuclear units . Correct structural formula: .
Dissolves in water to form an alkaline solution due to hydrolysis:
Heat Effect and Borax Bead Test:
On heating, borax loses water of crystallization and swells up. Further heating melts it into a transparent liquid that solidifies into a glass-like bead composed of Sodium Metaborate () and Boric Anhydride ():
When heated with transition metal oxides (e.g., ) on a platinum loop, characteristic colored metaborate beads form (e.g., Cobalt Metaborate, , forms a blue bead).
Orthoboric Acid ():
White crystalline solid with a soapy feel, sparingly soluble in cold water but highly soluble in hot water.
Prepared by acidifying an aqueous solution of borax:
Structure: Layered structure containing planar units linked by hydrogen bonds.

Acidity and Thermal Decomposition:
Boric acid is a weak monobasic Lewis acid (not a protonic acid). It accepts an ion from water to complete its octet, releasing a proton:
Thermal dehydration above forms Metaboric acid (), which yields Boric oxide () upon further heating:
Problem 11.4: Why is boric acid considered a weak acid?
Solution: It cannot release ions directly; instead, it acts as a Lewis acid by accepting from water, leaving free in solution.
Diborane ():
Preparation Methods:
Treatment of Boron Trifluoride with in diethyl ether:
Laboratory method by oxidation of Sodium Borohydride with Iodine:
Industrial preparation by reaction of with Sodium Hydride at :
Physical and Chemical Properties:
Colourless, highly toxic gas with a boiling point of .
Spontaneously flammable in air, burning with immense heat release:
Readily hydrolyzes in water to yield boric acid:
Cleavage reactions with Lewis bases () yield adducts ():
Reaction with Ammonia yields (formulated as ), which on heating forms Borazine (), known as "inorganic benzene":
Structure and Bonding:
Four terminal Hydrogen atoms and two Boron atoms lie in a single plane, bonded by regular () covalent bonds ( bond length, bond angle).
Two bridging Hydrogen atoms lie above and below this plane, forming () banana bonds ( bond length, bond angle).
Each Boron atom undergoes hybridization.


Tetrahydridoborates (Borohydrides):
Reaction of metal hydrides with in ether yields hydridoborate salts containing tetrahedral ions:
and are widely used as reducing agents in organic synthesis.
Uses of Group 13 Elements and Compounds
Boron Applications:
Boron fibers are used to reinforce lightweight composite materials for aircraft and bullet-proof vests.
The isotope possesses an extraordinarily high neutron-absorption cross-section, making metal borides essential for nuclear reactor control rods and protective shields.
Borax and Boric acid are used in heat-resistant glasses (e.g., Pyrex), glass-wool, fiberglass, soldering fluxes, earthenware glazes, medicinal soaps, and mild antiseptics.
Aluminium Applications:
Silvery-white metal with high tensile strength, high thermal conductivity, and high electrical conductivity (twice that of copper on a weight-for-weight basis).
Forms alloys with , , , , and .
Extensively fabricated into pipes, tubes, rods, wires, plates, and foils for packaging, cookware, construction, aircraft, and transportation industries.
Group 14 Elements: The Carbon Family
Occurrence and Abundance:
Group 14 comprises Carbon (), Silicon (), Germanium (), Tin (), and Lead ().
Carbon is the 17th most abundant element by mass in Earth's crust. It occurs elemental (coal, graphite, diamond) and combined (metal carbonates, hydrocarbons, atmospheric at ). Three natural isotopes: , (stable), and (radioactive, , used in radiocarbon dating).
Silicon is the 2nd most abundant element ( by mass), occurring as silica and silicates in ceramics, glass, and cement.
Germanium occurs in trace amounts. Tin occurs mainly as Cassiterite () and Lead as Galena ().
Ultrapure Germanium and Silicon are primary materials for semiconductors and transistors.
Electronic Configurations:
General valence shell electronic configuration:
Carbon ():
Silicon ():
Germanium ():
Tin ():
Lead ():

Trends in Atomic Radii, Ionization Enthalpy, and Electronegativity:
Covalent radius increases substantially from () to (), followed by small increases through (), (), and () due to shielding by filled and shells.
First ionization enthalpy decreases down the group, though shows a slight increase over due to poor shielding by orbitals.
Electronegativity: Carbon () is the most electronegative; , , and are equal (), while rises slightly to .
Physical Properties:
All members are solids. Carbon and Silicon are non-metals, Germanium is a metalloid, Tin and Lead are soft metals.
Melting and boiling points are substantially higher than those of Group 13 elements due to strong giant covalent structures.
Oxidation States and Chemical Reactivity:
Common oxidation states are and . Carbon also exhibits negative oxidation states.
High combined ionization enthalpy () means compounds are covalent.
Stability of the state increases down the group () due to the inert pair effect. and show predominantly . acts as a reducing agent. compounds are stable, while acts as a strong oxidizing agent.
Tetravalent species (e.g., ) are electron-precise. Elements below Carbon expand their covalence beyond using vacant orbitals (e.g., , , , hybridized).
Reactivity Towards Oxygen:
Form monoxides () and dioxides ().
Dioxides , , and are acidic; and are amphoteric.
Monoxides: is neutral; is acidic; and are amphoteric.
Problem 11.5: Select Group 14 members that (i) form most acidic dioxide, (ii) commonly exist in , (iii) are used as semiconductors.
Solution: (i) Carbon (), (ii) Lead (), (iii) Silicon and Germanium.
Reactivity Towards Water:
, , and are unaffected by water.
Tin decomposes steam to form dioxide and hydrogen gas:
Lead is unaffected due to the formation of an unreactive oxide surface film.
Reactivity Towards Halogens:
Form halides and . Tetrahalides are covalent and tetrahedral (), except and which are ionic.
does not exist because the energy released during bond formation is insufficient to unpair electrons.
Except , tetrahalides undergo hydrolysis because the central atom can accept lone pairs from water into vacant orbitals:
Problem 11.6: is known whereas is not.
Solution: (i) Six large ions cannot be accommodated around the small ion due to steric hindrance. (ii) Lone pair interaction between and is weak.
Anomalous Behaviour and Catenation of Carbon:
Carbon differs due to small size, high electronegativity, high ionization enthalpy, and lack of orbitals.
Carbon forms strong multiple bonds (, , , , ).
Catenation: The unique property of self-linking through covalent bonds to form long chains and rings. Catenation order: (Lead does not show catenation).
Single bond enthalpy values: (), (), (), ().
Allotropes of Carbon
Diamond:
Rigid 3D giant network lattice. Each carbon atom undergoes hybridization and is tetrahedrally bonded to four other carbons with a bond length of .
Hardest natural substance on Earth due to directional covalent bonds extending throughout the lattice.
Used as an abrasive, in cutting dies, and for manufacturing tungsten light bulb filaments.
Problem 11.7: Diamond is covalent, yet has a high melting point.
Solution: It possesses a continuous 3D network of strong covalent bonds that require vast amounts of energy to break.

Graphite:
Layered structure held together by weak van der Waals forces. Inter-layer distance is .
Each layer consists of planar hexagonal rings of hybridized carbon atoms ( bond length = ).
Each carbon forms three bonds; the fourth electron contributes to a delocalized system spanning the entire sheet, granting high electrical conductivity.
Cleaves easily between layers, making it soft, slippery, and useful as a solid lubricant in high-temperature machinery.
Thermodynamically the most stable allotrope of carbon (standard enthalpy of formation ).

Fullerenes:
Discovered in 1985 by H.W. Kroto, E. Smalley, and R.F. Curl (Nobel Prize 1996).
Synthesized by heating graphite in an electric arc in an inert gas atmosphere ( or ).
Cage-like molecules consisting mainly of (Buckminsterfullerene) alongside smaller amounts of and larger traces.
is soccer-ball-shaped with vertices (each occupied by one hybridized carbon atom) and contains six-membered rings and five-membered rings.
A six-membered ring can fuse with either five- or six-membered rings, but a five-membered ring fuses exclusively with six-membered rings.
Contains single () and double () bonds, displaying aromatic character.
Enthalpies of formation: , , .

Amorphous Carbon and Uses:
Carbon black (burning hydrocarbons in limited air), Charcoal, and Coke (heating wood or coal without air) are microcrystalline/impure forms of graphite or fullerenes.
Uses: Graphite-plastic composites for sports gear and aircraft; graphite electrodes in batteries; activated charcoal for gas masks and water filters; carbon black as black pigment and tire filler; coke as a reducing agent in metallurgy; diamond in jewelry ().
Important Compounds of Carbon and Silicon
Carbon Monoxide ():
Preparation:
Incomplete combustion of carbon:
Small scale laboratory dehydration of formic acid with concentrated at :
Industrial preparation by passing steam over red-hot coke yields Water Gas (Synthesis gas):
Passing air over red-hot coke yields Producer Gas:
Properties and Toxicity:
Colourless, odourless, almost water-insoluble gas.
Powerful reducing agent used in metallurgy:
Structure: Contains one bond and two bonds (). Acts as a donor ligand forming metal carbonyls.
Highly poisonous: Binds to hemoglobin to form carboxyhemoglobin, which is approximately times more stable than oxyhemoglobin, stopping oxygen transport.
Carbon Dioxide ():
Preparation:
Complete combustion of carbon compounds:
Laboratory method using dilute on calcium carbonate:
Properties and Biochemical Role:
Colourless, odourless, non-poisonous gas.
Dissolves in water forming carbonic acid (), a weak dibasic acid:
The buffer system maintains human blood pH between and .
Converted by plants into carbohydrates via photosynthesis:
Solid is known as Dry Ice and is used as a refrigerant. Gaseous is used in carbonated drinks, fire extinguishers, and urea manufacturing.
Structure: Linear molecule ( hybridized), bond length , zero dipole moment.
Silicon Dioxide ():
Commonly known as silica; constitutes of Earth's crust alongside silicates.
Crystalline forms: Quartz, Cristobalite, Tridymite.
Structure: 3D covalent network in which each Silicon atom is tetrahedrally bonded to four Oxygen atoms, and each Oxygen atom bridges two Silicon atoms, forming 8-membered rings.

Inert due to high bond enthalpy, but reacts with and :
Uses: Quartz is a piezoelectric material for high-precision clocks and broadcasting equipment; Silica gel is a desiccant and chromatographic support; Kieselghur is used in filtration.
Silicones:
Group of organosilicon polymers containing as repeating units.
Synthesis: Methyl chloride reacts with silicon in the presence of copper catalyst at to yield methylchlorosilanes (, , ). Hydrolysis of followed by condensation polymerization yields linear silicones. Chain length is controlled by adding .
Properties and Uses: Surrounded by non-polar alkyl groups, silicones are water-repellent, thermally stable, chemically resistant, and possess high dielectric strength. Used as sealants, greases, electrical insulators, fabric waterproofers, and biocompatible surgical/cosmetic implants.
Problem 11.8: What are silicones?
Solution: Polymers composed of chains in which alkyl or phenyl groups occupy the remaining bonding positions on silicon atoms. They are strongly hydrophobic.
Silicates:
Basic structural unit is the tetrahedral anion.

Tetrahedra share or corner oxygen atoms to form discrete units, chains, rings, sheets, or 3D networks. Negative charges are balanced by metal cations.
Natural silicate minerals include Feldspar, Zeolites, Mica, and Asbestos. Man-made silicates include Glass and Cement.
Zeolites:
3D aluminosilicates where replaces some atoms in the network, creating a negatively charged framework balanced by , , or .
Used as shape-selective catalysts in petrochemical industries (e.g., ZSM-5 converts alcohols directly into gasoline).
Hydrated zeolites act as ion-exchangers in water softening.