Basic Clean Air Car Course - Smog Cause and Effect Study Guide

Smog Check Technician Responsibilities and Course Objectives

  • Role of the Smog Check Technician:

    • Technicians act as frontline representatives of the Smog Check program.
    • Technicians are in direct contact with the public, who view them as experts in vehicle pollution control.
    • Technicians must possess a firm understanding of California's air pollution problem in order to explain to vehicle owners how proper inspection, maintenance, and vehicle repair reduce air pollution and provide personal and public benefits.
  • Core Course Learning Objectives:

    • Demonstrate knowledge of the combustion process within internal combustion engines.
    • Understand the formation mechanics and health/environmental effects of carbon monoxide (COCO).
    • Understand the formation mechanics and health/environmental effects of hydrocarbons (HCHC).
    • Understand the formation mechanics and health/environmental effects of oxides of nitrogen (NOxNO_x).
    • Comprehend Federal and State efforts designed to control vehicle air pollutants.

Mechanics of Engine Combustion

  • Definition of Combustion:

    • Combustion is the process of generating mechanical power to move a vehicle through a series of chemical reactions between fuel, air, and heat.
    • When an ignition source (a spark) is introduced to a compressed mixture of fuel and air, it reacts and expands rapidly.
  • In-Cylinder Process:

    • A mixture of fuel and air is delivered into an engine cylinder.
    • The upward movement of the cylinder's piston compresses the fuel-air mixture.
    • Compressing the mixture raises both its internal temperature and pressure.
    • An adequate ignition source (sufficient voltage and spark duration from a spark plug) ignites the compressed mixture to initiate combustion.

Chemical Process of Ideal and Imperfect Combustion

  • Total (Perfect) Combustion:

    • Total combustion occurs when all fuel delivered to the combustion chamber is completely burned.
    • Chemical Breakdown: Gasoline consists of hydrocarbon (HCHC) molecules. During combustion, these molecules break down into hydrogen (HH) and carbon (CC) molecules, which combine with oxygen (O2O_2) drawn in through the air filter.
    • Stoichiometric Requirement: Complete oxidation requires a precise air/fuel ratio of 14.7114.71 by weight (stoichiometric ratio) to provide sufficient oxygen molecules for all split carbon and hydrogen atoms.
    • Ideal By-products: Perfect combustion produces only three elements:
      • Heat
      • Water (H2OH_2O)
      • Carbon dioxide (CO2CO_2)
  • Actual (Imperfect) Combustion:

    • Perfect combustion is virtually impossible in modern internal combustion engines due to varying combustion temperatures and fluctuating air/fuel ratios.
  • Formation of Oxides of Nitrogen (NOxNO_x):

    • Nitrogen (NN) is normally an inert gas in ambient air.
    • When combustion chamber temperatures exceed 2500oF2500^\text{o}\text{F}, nitrogen reacts with oxygen to form NONO, NO2NO_2, or NO3NO_3 (collectively termed NOxNO_x).
    • The subscript xx in NOxNO_x denotes a variable number of oxygen atoms.
    • While NOxNO_x is not inherently harmful on its own, it reacts with hydrocarbons (HCHC) in the presence of sunlight to form photochemical smog (visible as a brown skyline haze).
  • Effects of Off-Stoichiometric Air/Fuel Ratios:

    • Lean Mixture (Ratio higher than 14.7114.71):
      • An insufficient amount of fuel exists relative to air.
      • The flame front lacks enough fuel to travel smoothly across the chamber, causing the flame front to die out.
      • Results in unburned fuel (hydrocarbons) exiting the engine.
    • Rich Mixture (Ratio lower than 14.7114.71):
      • An excessive amount of fuel exists relative to available oxygen.
      • There are insufficient oxygen molecules to oxidize all hydrocarbon molecules.
      • Unburned raw gasoline (HCHC) and carbon monoxide (COCO) remain in the chamber and are forced out during the exhaust stroke.
  • Variables Influencing Combustion Quality:

    • Type and quality of fuel.
    • Density and quantity of intake air.
    • Heat generated by mechanical compression.
    • Temperature rise produced by the spark ignition source.
  • Emission Control Systems:

    • Because complete combustion is unachievable, manufacturers install secondary control systems to convert emitted pollutants into non-hazardous liquids and gases.
    • A malfunctioning emission control device directly leads to elevated pollutant output and degraded vehicle driveability.

Abnormal Combustion Conditions: Preignition, Dieseling, and Detonation

  • Normal Flame Travel Mechanics:

    • Engine combustion is a controlled slow-burn process rather than an instantaneous explosion.
    • A flame front starts at the spark plug tip and advances smoothly outward toward the cylinder walls.
    • Burn duration of an air/fuel mixture in a combustion chamber is approximately 3/1,000 second3/1,000\text{ second}.
    • By comparison, gunpowder burns in approximately 1/50,000 second1/50,000\text{ second} (150150 times faster than the air/fuel mixture).
    • Normal Flame Sequence: Spark occurs →\rightarrow Combustion begins →\rightarrow Combustion continues →\rightarrow Combustion ends (uninterrupted).
  • Preignition:

    • Mechanism: Occurs when an ignition source ignites the air/fuel mixture before the spark plug fires.
    • Characteristics: Creates two opposing flame fronts inside the cylinder, burning the mixture in 1/21/2 the normal time and producing an explosive pressure wave.
    • Symptoms: Audible "rattle" or "ping" during vehicle acceleration.
    • Causes: Glowing carbon deposits, an overheated exhaust valve, or hot jagged metal edges inside the combustion chamber.
    • Primary Fuel Cause: Using low-quality fuel in a high-compression engine.
    • Dieseling (After-run): Severe preignition in an overheated engine where combustion continues after the ignition switch is turned off, causing a chugging, rattling engine run.
    • Preignition Sequence: Preignition occurs →\rightarrow Spark occurs →\rightarrow Combustion begins →\rightarrow Flame fronts collide.
  • Detonation:

    • Mechanism: Occurs when extreme heat and pressure cause a spontaneous second ignition source after the spark plug has fired.
    • Ideal Timing: Maximum combustion pressure should occur just after the piston reaches Top Dead Center (TDCTDC).
    • Impact on Performance: Causes erratic peak pressure timing, resulting in major engine power loss.
    • Symptoms: Audible knocking or hammering noise. High-speed detonation is frequently unheard by drivers due to engine and road noise under load.
    • Engine Damage: Exposes the top of the piston to extreme heat, which can melt or blow a hole directly through the piston head if left uncorrected.
    • Detonation Sequence: Spark occurs →\rightarrow Combustion begins →\rightarrow Spontaneous combustion occurs →\rightarrow Flame fronts collide.

Flame Quenching and Exhaust Emissions

  • Definition of Quenching:

    • During flame propagation, unburned fuel molecules contact the relatively cool metal surfaces of the combustion chamber.
    • Heat is conducted away into metal walls cooled by engine coolant inside the surrounding water jacket.
    • The temperature of the layer of gas adjacent to the cool metal falls below its ignition kindling temperature, extinguishing the flame along the surface.
  • Emissions Impact of Quenching:

    • Quenched, unburned fuel molecules condense along the chamber walls.
    • When the exhaust valve opens, these unburned and quenched hydrocarbon gases are swept out of the cylinder into the exhaust system and emitted into the atmosphere.

California Air Pollution Dynamics and Health Impacts

  • California Air Resources Board (ARB) Findings (February 22, 2007):

    • Air monitoring demonstrates that over 90%90\% of California residents breathe unhealthy levels of one or more air pollutants during part of the year.
    • ARB establishes health-based ambient air quality standards to protect vulnerable populations, specifically children and the elderly.
    • Air pollution contributes significantly to annual statewide deaths from cardiovascular and pulmonary diseases.
    • The American Academy of Pediatrics states that urban smog levels are capable of causing permanent lung damage in children.
  • Classification of Air Pollutants:

    1. Direct Pollutants: Emitted directly into the atmosphere from mobile and industrial sources.
    2. Secondary Pollutants: Produced by ambient atmospheric chemical reactions, primarily driven by sunlight.
    • Airborne particulate matter exists in high quantities across both categories.

Chemical Characteristics of Vehicle Pollutants

  • Carbon Monoxide (COCO):

    • Origin: Formed by incomplete combustion/oxidation of carbon-based fossil fuels; primarily produced by mobile vehicular sources.
    • Biological Mechanism: COCO binds tightly to blood hemoglobin, displacing oxygen and reducing oxygen delivery to the heart, brain, and major organs.
    • Risk Groups: Highly dangerous to individuals with coronary artery disease.
    • Symptoms in Healthy Individuals: Headaches, fatigue, and reduced reflex speed resulting from tissue hypoxia.
  • Ozone (O3O_3) and Photochemical Smog:

    • Origin: Ozone is the primary constituent of photochemical smog, formed when oxides of nitrogen (NOxNO_x) and hydrocarbons (HCHC) react chemically in the presence of sunlight.
    • Pathology: Acts as a powerful respiratory irritant that damages lung tissue.
    • Medical Complications: Aggravates asthma, bronchitis, emphysema, and cardiovascular conditions.
    • Acute Exposure Symptoms: Nausea, dizziness, headache, coughing, and chest burning sensations in healthy individuals.

Student Review Questions and Core Concepts

  • Question 1: If perfect ideal combustion occurred, what two chemicals would be exhausted from the engine?

    • Answer: Water (H2OH_2O) and Carbon Dioxide (CO2CO_2).
  • Question 2: Gasoline is a fossil fuel (hydrocarbon). What two atoms makeup this fuel?

    • Answer: Hydrogen (HH) and Carbon (CC).
  • Question 3: What typically causes detonation to occur?

    • Answer: Excessive temperature in the combustion chamber causing a spontaneous second source of ignition after the spark plug has fired.
  • Question 4: How does a glowing piece of carbon in the combustion chamber effect combustion?

    • Answer: It acts as an ignition source that ignites the air/fuel mixture before the spark plug fires, causing preignition.
  • Question 5: How is CO2CO_2 created?

    • Answer: Created during complete oxidation when split carbon molecules from the hydrocarbon fuel combine with oxygen drawn in through the air filter.
  • Question 6: What pollutant is formed by heat and pressure during the combustion process?

    • Answer: Oxides of Nitrogen (NOxNO_x), formed when temperatures exceed 2500oF2500^\text{o}\text{F}.
  • Question 7: Photochemical smog is made up of what chemicals that combine in sunlight?

    • Answer: Hydrocarbons (HCHC) and Oxides of Nitrogen (NOxNO_x).
  • Question 8: Carbon monoxide binds to hemoglobin in the blood and reduces what to the heart, brain and other body tissues?

    • Answer: Oxygen.
  • Question 9: A healthy person exposed to high concentrations of ozone may experience what type of symptoms?

    • Answer: Nausea, dizziness, headache, cough, or a burning sensation in the chest.
  • Question 10: What effect does quenching have on combustion?

    • Answer: Cools the fuel-air mixture near metal surfaces below its ignition kindling temperature, stopping combustion at the walls and leaving unburned hydrocarbons to be pushed into the exhaust.