Applications of Integration: Hydrostatic Force, Centers of Mass, and Theorems of Pappus

Based on the section and quiz materials, the problems you will encounter fall into four major categories. Below is a breakdown of every specific problem type and the step-by-step strategy to solve each.


Category 1: Hydrostatic Pressure and Force

Type 1: Horizontal Submerged Surfaces (Tank & Pool Bottoms)

  • Characteristics: A flat horizontal surface submerged at a constant vertical depth dd.

  • How to Solve:

    1. Determine the depth dd and base area AA.

    2. Compute hydrostatic pressure: P=ρgdP = \rho g d (SI units, using ρ=1000 kg/m3\rho = 1000\,\text{kg}/\text{m}^3 and g=9.8 m/s2g = 9.8\,\text{m}/\text{s}^2) or P=δdP = \delta d (US Customary, using weight density δ=62.4 lb/ft3\delta = 62.4\,\text{lb}/\text{ft}^3 or 62.5 lb/ft362.5\,\text{lb}/\text{ft}^3).

    3. Compute total force: F=P⋅AF = P \cdot A.

Type 2: Vertical Polygonal Surfaces (Dams, Rectangular Walls, Triangular Forms)

  • Characteristics: Flat vertical surfaces where depth continuously varies, with linear boundaries (e.g., trapezoidal dams, right-triangular concrete forms).

  • How to Solve:

    1. Choose a coordinate axis:

    • Option A: Set the origin at the fluid surface pointing downward (x=0x = 0 at surface, depth is xx).

    • Option B: Set the origin at the bottom pointing upward (y=0y = 0 at base, depth is h−yh - y).

    1. Express strip width: Use linear equations (y=mx+by = mx + b) or similar triangles to find the width function w(x)w(x) or w(y)w(y).

    2. Formulate the differential force: Set up dF=P⋅dA=[ρg⋅d(x)]⋅[w(x) dx]dF = P \cdot dA = [\rho g \cdot d(x)] \cdot [w(x)\,dx].

    3. Integrate: Evaluate F=∫abρgd(x)w(x) dxF = \int_a^b \rho g d(x) w(x)\,dx across the submerged vertical bounds.

Type 3: Vertical Curved Surfaces (Circular Drums, Semi-Elliptic Tank Ends)

  • Characteristics: Plates bounded by curves such as circles (x2+y2=r2x^2 + y^2 = r^2) or semi-ellipses (y=−1236−9x2y = -\frac{1}{2}\sqrt{36 - 9x^2}).

  • How to Solve:

    1. Choose an origin at the center or vertex of symmetry to keep boundary equations simple.

    2. Express horizontal strip width: Solve for xx in terms of yy to get strip length w(y)=2x(y)w(y) = 2x(y).

    3. Express depth d(y)d(y) from the surface.

    4. Set up the integral F=∫abδ⋅d(y)⋅w(y) dyF = \int_a^b \delta \cdot d(y) \cdot w(y)\,dy.

    5. Exploit symmetry/trigonometry: Split terms. Integrals of odd functions over symmetric intervals ([−r,r][-r, r]) equal 00, while remaining terms often represent simple geometric figures (e.g., area of a semicircle 12πr2\frac{1}{2}\pi r^2) or evaluate by direct substitution.

Type 4: The Centroid Shortcut for Hydrostatic Force

  • Characteristics: Finding force on standard geometric shapes (rectangles, triangles, circles) without setting up a full integral.

  • How to Solve:

    1. Find total area AA of the submerged surface.

    2. Identify the vertical depth xˉ\bar{x} of the shape's geometric centroid beneath the liquid surface (e.g., centroid of a triangle with a horizontal top base sits at 13\frac{1}{3} of its height below the base).

    3. Calculate force directly: F=ρgxˉAF = \rho g \bar{x} A or F=δxˉAF = \delta \bar{x} A.


Category 2: Discrete Moments and Centers of Mass

Type 5: One-Dimensional Discrete Systems (Collinear Masses / Levers)

  • Characteristics: Point masses m1,m2,…,mnm_1, m_2, \dots, m_n located along the xx-axis.

  • How to Solve:

    1. Total mass: m=∑i=1nmim = \sum_{i=1}^n m_i.

    2. Moment about origin: M=∑i=1nmixiM = \sum_{i=1}^n m_i x_i.

    3. Center of mass: xˉ=Mm=∑i=1nmixi∑i=1nmi\bar{x} = \frac{M}{m} = \frac{\sum_{i=1}^n m_i x_i}{\sum_{i=1}^n m_i}.

Type 6: Two-Dimensional Discrete Planar Systems

  • Characteristics: Point masses located at coordinates (xi,yi)(x_i, y_i) in the xyxy-plane.

  • How to Solve:

    1. Total mass: m=∑i=1nmim = \sum_{i=1}^n m_i.

    2. Moment about the yy-axis: My=∑i=1nmixiM_y = \sum_{i=1}^n m_i x_i.

    3. Moment about the xx-axis: Mx=∑i=1nmiyiM_x = \sum_{i=1}^n m_i y_i.

    4. Center of mass: (xˉ,yˉ)=(Mym,Mxm)(\bar{x}, \bar{y}) = \left(\frac{M_y}{m}, \frac{M_x}{m}\right).


Category 3: Centroids of Continuous Plane Laminas

Type 7: Lamina Under a Single Curve y=f(x)y = f(x)

  • Characteristics: Region bounded by y=f(x)y = f(x), y=0y = 0, x=ax = a, and x=bx = b.

  • How to Solve:

    1. Compute area: A=∫abf(x) dxA = \int_a^b f(x)\,dx.

    2. Compute xˉ\bar{x}: xˉ=1A∫abxf(x) dx\bar{x} = \frac{1}{A} \int_a^b x f(x)\,dx.

    3. Compute yˉ\bar{y}: yˉ=1A∫ab12[f(x)]2 dx\bar{y} = \frac{1}{A} \int_a^b \frac{1}{2} [f(x)]^2\,dx.

    4. If the region is symmetric across a vertical line x=cx = c, immediately set xˉ=c\bar{x} = c.

Type 8: Lamina Bounded Between Two Curves

  • Characteristics: Region between y=f(x)y = f(x) (upper) and y=g(x)y = g(x) (lower), or between x=f(y)x = f(y) (right) and x=g(y)x = g(y) (left).

  • How to Solve (Vertical Strips, dxdx):

    1. Find intersection bounds aa and bb.

    2. Area: A=∫ab[f(x)−g(x)] dxA = \int_a^b [f(x) - g(x)]\,dx.

    3. xˉ=1A∫abx[f(x)−g(x)] dx\bar{x} = \frac{1}{A} \int_a^b x [f(x) - g(x)]\,dx.

    4. yˉ=1A∫ab12([f(x)]2−[g(x)]2) dx\bar{y} = \frac{1}{A} \int_a^b \frac{1}{2} \left([f(x)]^2 - [g(x)]^2\right)\,dx.

  • How to Solve (Horizontal Strips, dydy):

    1. Use when boundaries are easily solved for xx (e.g., x=y+2x = y + 2 and x=y2x = y^2).

    2. yˉ=1A∫cdy[xright−xleft] dy\bar{y} = \frac{1}{A} \int_c^d y [x_{\text{right}} - x_{\text{left}}]\,dy.

    3. xˉ=1A∫cd12([xright]2−[xleft]2) dy\bar{x} = \frac{1}{A} \int_c^d \frac{1}{2} \left([x_{\text{right}}]^2 - [x_{\text{left}}]^2\right)\,dy.

Type 9: Composite Shapes (Additivity of Moments)

  • Characteristics: Regions made of combinations of known geometric shapes without calculus.

  • How to Solve:

    1. Partition into subregions R1,R2,…\mathcal{R}_1, \mathcal{R}_2, \dots with known areas AiA_i and centroids (xˉi,yˉi)(\bar{x}_i, \bar{y}_i).

    2. For triangles, note that the centroid is the average of its vertices: (xˉ,yˉ)=(x1+x2+x33,y1+y2+y33)(\bar{x}, \bar{y}) = \left(\frac{x_1 + x_2 + x_3}{3}, \frac{y_1 + y_2 + y_3}{3}\right).

    3. Total area: A=∑AiA = \sum A_i.

    4. Coordinates: xˉ=∑AixˉiA\bar{x} = \frac{\sum A_i \bar{x}_i}{A} and yˉ=∑AiyˉiA\bar{y} = \frac{\sum A_i \bar{y}_i}{A}.


Category 4: The Theorems of Pappus

Type 10: Solid Volume of Revolution (First Theorem of Pappus)

  • Characteristics: Finding the volume VV when a plane region R\mathcal{R} is revolved around an axis ll that does not cross it.

  • How to Solve:

    1. Find the area AA of region R\mathcal{R}.

    2. Find the perpendicular distance rr from the centroid of R\mathcal{R} to the axis of revolution ll.

    3. Calculate the distance traveled by the centroid: d=2πrd = 2\pi r.

    4. Compute volume: V=A⋅d=2πrAV = A \cdot d = 2\pi r A.

Type 11: Surface Area of Revolution (Second Theorem of Pappus)

  • Characteristics: Finding the surface area SS when a plane curve CC is rotated about an external line ll.

  • How to Solve:

    1. Find the arc length LL of curve CC.

    2. Find the distance rr from the centroid of curve CC to the axis of revolution.

    3. Compute surface area: S=L⋅d=2πrLS = L \cdot d = 2\pi r L.

Type 12: Finding Centroids of Curves or Inverting Pappus's Theorem

  • Characteristics: Finding the centroid of a wire curve CC or using known volume/area formulas to solve backward for an unknown centroid coordinate.

  • How to Solve:

    1. Direct Integration: xˉ=1L∫Cx ds\bar{x} = \frac{1}{L} \int_C x\,ds and yˉ=1L∫Cy ds\bar{y} = \frac{1}{L} \int_C y\,ds, where ds=1+[f′(x)]2 dxds = \sqrt{1 + [f'(x)]^2}\,dx.

    2. Inverse Pappus: If the volume VV and area AA are already known from geometry (e.g., a sphere or cone), solve for the centroid coordinate via rˉ=V2πA\bar{r} = \frac{V}{2\pi A}.