Chapter 8: Work, Energy, and Power

Work, Energy, and Power

  • Work (WW):

    • Work is performed whenever an external force is exerted across a distance, with the total work done being directly proportional to both the applied force and the displacement.

    • Governing equation:     W=F dW = F\,d

    • The SI unit of work is the newton-meter (N⋅mN \cdot m), which is equivalent to the joule (JJ):     1 N⋅m=1 J1\,N \cdot m = 1\,J

    • Sign Conventions for Work:

    • Positive Work (W>0W > 0): The applied force points in the exact same direction as the displacement or motion.

    • Negative Work (W<0W < 0): The applied force acts in the opposite direction of the motion (such as kinetic friction opposing sliding).

    • Zero Work (W=0W = 0): Occurs when there is zero motion (d=0d = 0), or when the applied force acts perpendicular (⊥\perp) to the displacement (cos⁡(90∘)=0\cos(90^\circ) = 0).

  • Energy (EE):

    • Energy is defined as the operational ability of a system to perform work.

    • A system possesses energy whenever it is capable of exerting a force over a distance.

    • The magnitude of energy serves as a quantitative measure of the maximum theoretical work the system can execute.

    • When a system exhausts its internal energy reserves, it can no longer exert force across a distance to do work.

    • Energy exists across diverse physical forms, all of which are interchangeable through physical transformations.

  • Power (PP):

    • Power is defined as the time rate of doing work or the rate at which energy is expended.

    • Equations for power:     P=WtP = \frac{W}{t}     P=EtP = \frac{E}{t}

    • The SI unit of power is the watt (WW):     1 W=1 J/s1\,W = 1\,J/s

  • Forms of Mechanical Energy:

    • Kinetic Energy (KK):

    • The energy possessed by an object due to its motion.

    • Governed by two variables: mass (mm) and speed (vv).

    • Mathematical definition:       K=12mv2K = \frac{1}{2}m v^2

    • SI unit: kg⋅m2/s2=Jkg \cdot m^2/s^2 = J.

    • Potential Energy (UU):

    • Energy stored within a motionless configuration that maintains the latent capacity to perform work.

    • Gravitational Potential Energy (UU): Occurs when the gravitational force acts on an object of mass (mm), causing it to traverse a vertical height (yy) under the influence of its own weight (m gm\,g):       U=m g yU = m\,g\,y       where gg is the acceleration due to gravity (9.8 m/s29.8\,m/s^2 or approximated as 10 m/s</p></li></ul></li><li><p><strong>ConservationofMechanicalEnergy:</strong></p><ul><li><p>Totalmechanicalenergy(10\,m/s^</p></li></ul></li><li><p><strong>Conservation of Mechanical Energy:</strong></p><ul><li><p>Total mechanical energy (EororME)isthesumofkineticandpotentialenergy:    ) is the sum of kinetic and potential energy:     E = U + K</p></li><li><p>Inanisolatedorclosedsystemwithnegligiblenon−conservativeorfrictionalforces,thetotalmechanicalenergyisconserved:    </p></li><li><p>In an isolated or closed system with negligible non-conservative or frictional forces, the total mechanical energy is conserved:     E_i = E_f        U_i + K_i = U_f + K_f</p></li><li><p><em>SampleProblem3(SkateronaCurvedRamp):</em></p></li><li><p>AskateboarderstartsatpointA(</p></li><li><p><em>Sample Problem 3 (Skater on a Curved Ramp):</em></p></li><li><p>A skateboarder starts at point A (y_i = 2.7\,m)withspeed) with speedv_i = 1.4\,m/s.Neglectingfriction,thefinalspeedatpointB(. Neglecting friction, the final speed at point B (y_f = 1.0\,m)isderivedviaenergyconservation:      ) is derived via energy conservation:       m\,g\,y_i + \frac{1}{2}m v_i^2 = m\,g\,y_f + \frac{1}{2}m v_f^2            v_f = \sqrt{2g(y_i - y_f) + v_i^2}            v_f = \sqrt{2(9.8\,m/s^2)(2.7\,m - 1.0\,m) + (1.4\,m/s)^2} = 5.94\,m/s</p></li></ul></li><li><p><strong>TheWork−EnergyTheorem:</strong></p><ul><li><p>Thetotalworkdonebyallforcesactingonasystemequalstheresultingchangeinthesystem′skineticenergy:    </p></li></ul></li><li><p><strong>The Work-Energy Theorem:</strong></p><ul><li><p>The total work done by all forces acting on a system equals the resulting change in the system's kinetic energy:     W_{\text{total}} = \Delta K = \frac{1}{2}m v_f^2 - \frac{1}{2}m v_i^2</p></li><li><p>Forconservativeinteractions,workrelatesinverselytochangesinpotentialenergy:    </p></li><li><p>For conservative interactions, work relates inversely to changes in potential energy:     W_c = U_i - U_f = -(U_f - U_i) = -\Delta U</p></li><li><p><em>SampleProblem4(AcceleratingRunner):</em></p></li><li><p>Workrequiredfora</p></li><li><p><em>Sample Problem 4 (Accelerating Runner):</em></p></li><li><p>Work required for a73\,kgrunnertoacceleratefromrest(runner to accelerate from rest (v_i = 0\,m/s)to) tov_f = 7.7\,m/s:      :       W_{\text{total}} = \frac{1}{2}m(v_f^2 - v_i^2) = \frac{1}{2}(73\,kg)((7.7\,m/s)^2 - (0\,m/s)^2) = 2164.1\,J</p></li></ul></li></ul><h3>TemperatureandThermalPhysics</h3><ul><li><p><strong>FundamentalTemperatureDefinitions:</strong></p><ul><li><p><strong>MacroscopicDefinition:</strong>Ascalarquantityindicatinghowhotorcoldanobjectisrelativetoanestablishedstandardvalue.</p></li><li><p><strong>Microscopic(Atomic)Basis:</strong>Temperaturerepresentstheaveragetranslationalkineticenergyoftheconstituentatomsandmoleculeswithinamaterial,includingmolecularvibrationalmodes.</p></li><li><p>Fastermovingandvigorouslyvibratingparticlescorresponddirectlytohighertemperatures;conversely,reducedmolecularspeedcharacterizeslowertemperatures.</p></li><li><p><strong>ThermalEquilibrium:</strong>Whenacoldthermometercontactsawarmermedium(suchashumantissue),energeticmoleculescollidewithlower−energythermometerparticles,acceleratingthemuntilbothsystemsreachanidenticalaveragekineticenergy,endingnetthermaltransfer.</p></li><li><p><strong>AbsoluteZero(</p></li></ul></li></ul><h3>Temperature and Thermal Physics</h3><ul><li><p><strong>Fundamental Temperature Definitions:</strong></p><ul><li><p><strong>Macroscopic Definition:</strong> A scalar quantity indicating how hot or cold an object is relative to an established standard value.</p></li><li><p><strong>Microscopic (Atomic) Basis:</strong> Temperature represents the average translational kinetic energy of the constituent atoms and molecules within a material, including molecular vibrational modes.</p></li><li><p>Faster moving and vigorously vibrating particles correspond directly to higher temperatures; conversely, reduced molecular speed characterizes lower temperatures.</p></li><li><p><strong>Thermal Equilibrium:</strong> When a cold thermometer contacts a warmer medium (such as human tissue), energetic molecules collide with lower-energy thermometer particles, accelerating them until both systems reach an identical average kinetic energy, ending net thermal transfer.</p></li><li><p><strong>Absolute Zero (0\,K):</strong>Thefundamentallowesttemperaturelimitatwhichatomicmotionceasesentirely(thoughquantummechanicalzero−pointfluctuationspreventtotalcessationofmotioninreality).</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/20025e97−9da4−47df−98dd−34a3ed9cddf4−figures/4.jpg"data−width="50):</strong> The fundamental lowest temperature limit at which atomic motion ceases entirely (though quantum mechanical zero-point fluctuations prevent total cessation of motion in reality).</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/20025e97-9da4-47df-98dd-34a3ed9cddf4-figures/4.jpg" data-width="50%" data-align="center" alt="Molecular motion at lower versus higher temperatures" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Standard Temperature Scales:</strong></p><ul><li><p>Arbitrary numerical frameworks calibrated against two easily reproducible physical references: the freezing and boiling phase transitions of pure water at atmospheric pressure.</p></li><li><p><strong>Fahrenheit (^\circ F):</strong>DevisedbyDanielGabrielFahrenheitin1724.Initiallycalibratedbetweenachilledbrinemixture(water,ice,andsalt)andnormalhumanbodytemperature.Standardreferencevalues:freezingpointofwaterat):</strong> Devised by Daniel Gabriel Fahrenheit in 1724. Initially calibrated between a chilled brine mixture (water, ice, and salt) and normal human body temperature. Standard reference values: freezing point of water at32\,^\circ Fandboilingpointatand boiling point at212\,^\circ F.</p></li><li><p><strong>Celsius(.</p></li><li><p><strong>Celsius (^\circ C):</strong>DevelopedbyAndersCelsiusin1742.Originallyassigned):</strong> Developed by Anders Celsius in 1742. Originally assigned0\,^\circ Ctoboilingwaterandto boiling water and100\,^\circ Ctofreezingwater,whichwaslaterinvertedtosetthefreezingpointatto freezing water, which was later inverted to set the freezing point at0\,^\circ Candboilingpointatand boiling point at100\,^\circ C.</p></li><li><p><strong>Kelvin(.</p></li><li><p><strong>Kelvin (K):</strong>ProposedbyWilliamThomson(LordKelvin)in1848basedonanabsolutelowerlimitoftemperature.Setsabsolutezeroat):</strong> Proposed by William Thomson (Lord Kelvin) in 1848 based on an absolute lower limit of temperature. Sets absolute zero at0\,K,waterfreezingat, water freezing at273.15\,K,andwaterboilingat, and water boiling at373.15\,K.</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/20025e97−9da4−47df−98dd−34a3ed9cddf4−figures/1.jpg"data−width="50.</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/20025e97-9da4-47df-98dd-34a3ed9cddf4-figures/1.jpg" data-width="50%" data-align="center" alt="Comparison of Kelvin, Celsius, and Fahrenheit temperature scales" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Temperature Conversion Formulas:</strong></p><ul><li><p>Fahrenheit to Celsius:     T_C = \frac{5}{9}(T_F - 32)</p></li><li><p>CelsiustoFahrenheit:    </p></li><li><p>Celsius to Fahrenheit:     T_F = \frac{9}{5}T_C + 32</p></li><li><p>CelsiustoKelvin:    </p></li><li><p>Celsius to Kelvin:     T_K = T_C + 273.15</p></li><li><p>FahrenheittoKelvin:    </p></li><li><p>Fahrenheit to Kelvin:     T_K = \frac{5}{9}(T_F - 32) + 273.15</p></li><li><p><em>SampleProblem1:</em>Aforecastedhighof</p></li><li><p><em>Sample Problem 1:</em> A forecasted high of32\,^\circ Ctranslatesto:    translates to:     T_F = \frac{9}{5}(32) + 32 = 57.6 + 32 = 89.6\,^\circ F    Glovesandawintercoatareunnecessaryforthiswarmweather.</p></li></ul></li><li><p><strong>Thermometry:</strong></p><ul><li><p>Thermometersoperatebymonitoringphysicalpropertyshiftsinducedbythermalvariance.</p></li><li><p>Traditionalliquidthermometersexploitthevolumeexpansionandcontractionoffluidssuchasmercuryorcoloredalcohol.</p></li><li><p>Digitalthermometersutilizethermocouples,whichmonitortemperature−dependentchangesinelectricalresistivityorthermoelectricvoltagegeneration.</p></li></ul></li><li><p><strong>ThermalExpansion:</strong></p><ul><li><p>Raisingtemperatureamplifiesatomicvibrationalamplitudes,causingatomstooscillatefartherfromtheirmeanequilibriumpositions,forcinganincreaseinbulkvolume.</p></li><li><p>Linearexpansionisquantifiedbythecoefficientoflinearexpansion(    Gloves and a winter coat are unnecessary for this warm weather.</p></li></ul></li><li><p><strong>Thermometry:</strong></p><ul><li><p>Thermometers operate by monitoring physical property shifts induced by thermal variance.</p></li><li><p>Traditional liquid thermometers exploit the volume expansion and contraction of fluids such as mercury or colored alcohol.</p></li><li><p>Digital thermometers utilize thermocouples, which monitor temperature-dependent changes in electrical resistivity or thermoelectric voltage generation.</p></li></ul></li><li><p><strong>Thermal Expansion:</strong></p><ul><li><p>Raising temperature amplifies atomic vibrational amplitudes, causing atoms to oscillate farther from their mean equilibrium positions, forcing an increase in bulk volume.</p></li><li><p>Linear expansion is quantified by the coefficient of linear expansion (\alpha):    ):     \Delta L = \alpha L_0 \Delta T        L = L_0(1 + \alpha \Delta T)</p></li><li><p><em>SampleProblem3(BridgeExpansion):</em></p></li><li><p>Asteelbridgewith</p></li><li><p><em>Sample Problem 3 (Bridge Expansion):</em></p></li><li><p>A steel bridge withL_0 = 100\,matat0\,^\circ Cexperiencesasummertemperatureofexperiences a summer temperature of40\,^\circ C((> 100\,^\circ F).Given). Given\alpha_{\text{steel}} = 0.000056\,(^\circ C)^{-1}:      :       \Delta L = (0.000056\,(^\circ C)^{-1})(100\,m)(40\,^\circ C) = 0.224\,m            L = 100\,m + 0.224\,m = 100.22\,m</p></li><li><p>Structuralexpansionjointspreventbucklingunderthesethermalvariations.</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/20025e97−9da4−47df−98dd−34a3ed9cddf4−figures/5.jpg"data−width="50</p></li><li><p>Structural expansion joints prevent buckling under these thermal variations.</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/20025e97-9da4-47df-98dd-34a3ed9cddf4-figures/5.jpg" data-width="50%" data-align="center" alt="Thermal expansion joint on a roadway bridge" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><h3>Heat and Calorimetry</h3><ul><li><p><strong>Heat and Internal Energy:</strong></p><ul><li><p><strong>Internal Energy (Thermal Energy):</strong> The net energy stored inside a substance arising from microscopic kinetic movements (rotations, vibrations, translations) and potential intermolecular bonds.</p></li><li><p><strong>Perception of Temperature:</strong> Touching an object whose atoms vibrate with greater kinetic energy than your skin results in a net transfer of energy into your hand, yielding the sensation of heat. Touching a colder object transfers energy out of your hand into the substance.</p></li><li><p><strong>Heat (Q):</strong>Thespontaneousprocessofthermalenergytransferringbetweenbodiesacrossatemperaturegradient.</p></li><li><p>Netheatabsorptionorlossaltersinternalenergy,shiftingtemperature,exceptduringisothermalphasetransitions.</p></li></ul></li><li><p><strong>TheMechanicalEquivalentofHeat:</strong></p><ul><li><p>Continuousmechanicalworkagainstfrictionalresistancegeneratesproportionalquantitiesofheatindefinitely,demonstratingthatheatisamechanismofenergytransfer.</p></li><li><p>JamesPrescottJoulequantitativelyestablishedtheequivalenceofmechanicalworkandthermalenergyusingafalling−weightpaddlewheelapparatus.</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/20025e97−9da4−47df−98dd−34a3ed9cddf4−figures/6.png"data−width="50):</strong> The spontaneous process of thermal energy transferring between bodies across a temperature gradient.</p></li><li><p>Net heat absorption or loss alters internal energy, shifting temperature, except during isothermal phase transitions.</p></li></ul></li><li><p><strong>The Mechanical Equivalent of Heat:</strong></p><ul><li><p>Continuous mechanical work against frictional resistance generates proportional quantities of heat indefinitely, demonstrating that heat is a mechanism of energy transfer.</p></li><li><p>James Prescott Joule quantitatively established the equivalence of mechanical work and thermal energy using a falling-weight paddlewheel apparatus.</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/20025e97-9da4-47df-98dd-34a3ed9cddf4-figures/6.png" data-width="50%" data-align="center" alt="Apparatus for mechanical equivalent of heat using nylon cord wrapped around an aluminum cylinder" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><p></p><img src="https://assets.knowt.com/pdf-flow-prod/20025e97-9da4-47df-98dd-34a3ed9cddf4-figures/7.jpg" data-width="50%" data-align="center" alt="Joule's paddlewheel apparatus for determining the mechanical equivalent of heat" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Units of Heat:</strong></p><ul><li><p><strong>Calorie (\text{cal}):</strong>Thequantityofheatneededtoelevatethetemperatureof):</strong> The quantity of heat needed to elevate the temperature of1\,gofwaterbyof water by1\,^\circ C.</p></li><li><p><strong>Kilocalorie(.</p></li><li><p><strong>Kilocalorie (\text{kcal}ordietary"Calorie"):</strong>Theheatrequiredtoraisethetemperatureofor dietary "Calorie"):</strong> The heat required to raise the temperature of1\,kgofwaterbyof water by1\,^\circ C.</p></li><li><p><strong>JouleEquivalence:</strong>    .</p></li><li><p><strong>Joule Equivalence:</strong>     1\,\text{kcal} = 4186\,J        1\,\text{cal} = 4.186\,J</p></li><li><p><strong>BritishThermalUnit(</p></li><li><p><strong>British Thermal Unit (\text{Btu}):</strong>Theenergyrequiredtoraisethetemperatureof):</strong> The energy required to raise the temperature of1\,\text{lb}ofwaterbyof water by1\,^\circ F.    .     1\,\text{Btu} = 1055\,J = 252\,\text{cal}</p></li><li><p><em>SampleProblem4(HayBaleWorkvs.FoodEnergy):</em></p></li><li><p>Afarmhandlifts</p></li><li><p><em>Sample Problem 4 (Hay Bale Work vs. Food Energy):</em></p></li><li><p>A farmhand lifts23.5\,kgbalesofhaytoheightbales of hay to heightH = 1.1\,m.</p></li><li><p>Gravitationalworkperbale:      .</p></li><li><p>Gravitational work per bale:       W = m\,g\,H = (23.5\,kg)(9.8\,m/s^2)(1.1\,m) = 253.33\,J</p></li><li><p>Totalenergyprovidedbya</p></li><li><p>Total energy provided by a485\text{-Calorie}chocolatemilkshake:      chocolate milkshake:       E = 485\,\text{kcal} \times 4186\,J/\text{kcal} = 2,030,210\,J</p></li><li><p>Totalbaleslifted:      </p></li><li><p>Total bales lifted:       N = \frac{2,030,210\,J}{253.33\,J/\text{bale}} \approx 8005\,\text{bales}</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/20025e97−9da4−47df−98dd−34a3ed9cddf4−figures/8.jpg"data−width="50</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/20025e97-9da4-47df-98dd-34a3ed9cddf4-figures/8.jpg" data-width="50%" data-align="center" alt="Illustration of lifting a bale of hay onto a flatbed truck" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Heat Capacity and Specific Heat:</strong></p><ul><li><p><strong>Heat Capacity (C):</strong>Theheatenergyrequiredtoalteranentireobject′stemperaturebyagivenamount:    ):</strong> The heat energy required to alter an entire object's temperature by a given amount:     C = \frac{Q}{\Delta T}    SIUnit:    SI Unit:J/K = J/^\circ C.</p></li><li><p>Heatcapacityisalwayspositive(.</p></li><li><p>Heat capacity is always positive (C > 0).</p></li><li><p>).</p></li><li><p>Q > 0ifheatisaddedtothesystem(if heat is added to the system (\Delta T > 0).</p></li><li><p>).</p></li><li><p>Q < 0ifheatisremovedfromthesystem(if heat is removed from the system (\Delta T < 0).</p></li><li><p><em>SampleProblem5(HeatCapacityofIron):</em></p></li><li><p>For).</p></li><li><p><em>Sample Problem 5 (Heat Capacity of Iron):</em></p></li><li><p>For1.00\,kgofironwithof iron withC = 448\,J/K:</p><ul><li><p>(a)Adding:</p><ul><li><p>(a) AddingQ = 493\,Jproducesatemperatureshiftof:        produces a temperature shift of:         \Delta T = \frac{Q}{C} = \frac{493\,J}{448\,J/K} = 1.10\,K</p></li><li><p>(b)Heatextractedtoreducetemperatureby</p></li><li><p>(b) Heat extracted to reduce temperature by2.68\,K:        :         Q = C\Delta T = (448\,J/K)(-2.68\,K) = -1200\,J</p></li></ul></li><li><p><strong>SpecificHeatCapacity(</p></li></ul></li><li><p><strong>Specific Heat Capacity (c):</strong>Theheatenergyneededperunitmasstoaltertemperaturebyoneunit,dependingstrictlyonthechemicalidentityofthematerial:    ):</strong> The heat energy needed per unit mass to alter temperature by one unit, depending strictly on the chemical identity of the material:     c = \frac{Q}{m\Delta T}    SIUnit:    SI Unit:J/(kg \cdot K) = J/(kg \cdot ^\circ C).</p></li><li><p>Substancescharacterizedbyexceptionallyhighspecificheatsabsorborreleasesubstantialheatquantitieswhileundergoingnegligibletemperaturealterations.</p></li></ul></li><li><p><strong>SpecificHeatCapacitiesofSelectedSubstances(.</p></li><li><p>Substances characterized by exceptionally high specific heats absorb or release substantial heat quantities while undergoing negligible temperature alterations.</p></li></ul></li><li><p><strong>Specific Heat Capacities of Selected Substances (J/(kg \cdot K)):</strong></p></li></ul><tablestyle="min−width:100px;"><colgroup><colstyle="min−width:25px;"><colstyle="min−width:25px;"><colstyle="min−width:25px;"><colstyle="min−width:25px;"></colgroup><tbody><tr><thcolspan="1"rowspan="1"style="text−align:left;"><p>Substance</p></th><thcolspan="1"rowspan="1"style="text−align:left;"><p>SpecificHeat():</strong></p></li></ul><table style="min-width: 100px;"><colgroup><col style="min-width: 25px;"><col style="min-width: 25px;"><col style="min-width: 25px;"><col style="min-width: 25px;"></colgroup><tbody><tr><th colspan="1" rowspan="1" style="text-align: left;"><p>Substance</p></th><th colspan="1" rowspan="1" style="text-align: left;"><p>Specific Heat (c)</p></th><thcolspan="1"rowspan="1"style="text−align:left;"><p>Substance</p></th><thcolspan="1"rowspan="1"style="text−align:left;"><p>SpecificHeat()</p></th><th colspan="1" rowspan="1" style="text-align: left;"><p>Substance</p></th><th colspan="1" rowspan="1" style="text-align: left;"><p>Specific Heat (c)</p></th></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Water</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>)</p></th></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Water</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>4186</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Silicon</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>Silicon</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>703</p></td></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Ice</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Ice</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>2090</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Iron(steel)</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>Iron (steel)</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>448</p></td></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Steam</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Steam</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>2010</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Copper</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>Copper</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>387</p></td></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Beryllium</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Beryllium</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>1820</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Silver</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>Silver</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>234</p></td></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Air</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Air</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>1004</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Gold</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>Gold</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>129</p></td></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Aluminum</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Aluminum</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>900</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Lead</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>Lead</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>128</p></td></tr><tr><tdcolspan="1"rowspan="1"style="text−align:left;"><p>Glass</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr><tr><td colspan="1" rowspan="1" style="text-align: left;"><p>Glass</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p>837</p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td><tdcolspan="1"rowspan="1"style="text−align:left;"><p></p></td></tr></tbody></table><ul><li><p><em>SampleProblem6(CalorimetrywithAluminum):</em></p><ul><li><p>Adding</p></td><td colspan="1" rowspan="1" style="text-align: left;"><p></p></td><td colspan="1" rowspan="1" style="text-align: left;"><p></p></td></tr></tbody></table><ul><li><p><em>Sample Problem 6 (Calorimetry with Aluminum):</em></p><ul><li><p>AddingQ = 72.3\,Jtoanaluminumsample(to an aluminum sample (m = 101\,g = 0.101\,kg)at) atT_i = 20.5\,^\circ Cwithwithc = 900\,J/(kg \cdot K):    :     \Delta T = \frac{Q}{m\,c} = \frac{72.3\,J}{(0.101\,kg)(900\,J/(kg \cdot K))} = \frac{72.3}{90.9} = 0.795\,^\circ C \approx 0.8\,^\circ C        T_f = T_i + \Delta T = 20.5\,^\circ C + 0.8\,^\circ C = 21.3\,^\circ C</p></li></ul></li></ul><h3>RotationalKinematics</h3><ul><li><p><strong>CoreRotationalConcepts:</strong></p><ul><li><p>Rotationalmotiondescribesanextendedbodyspinningaboutaninternalaxis.</p></li><li><p><strong>AxisofRotation:</strong>Astationarylinearoundwhicheveryotherpartoftheobjectsweepsincirculartrajectories(e.g.,Earth′srotationalaxispassingthroughitsNorthandSouthgeographicpoles).</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/4129dad4−1b4b−4a93−aea1−87d187cf3a9e−figures/3.jpg"data−width="50</p></li></ul></li></ul><h3>Rotational Kinematics</h3><ul><li><p><strong>Core Rotational Concepts:</strong></p><ul><li><p>Rotational motion describes an extended body spinning about an internal axis.</p></li><li><p><strong>Axis of Rotation:</strong> A stationary line around which every other part of the object sweeps in circular trajectories (e.g., Earth's rotational axis passing through its North and South geographic poles).</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/3.jpg" data-width="50%" data-align="center" alt="Earth spinning on its tilted rotational axis" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Rotational Timing:</strong></p><ul><li><p><strong>Period (T):</strong>Thetimedurationneededtocompleteonefullcycleofrevolution.</p></li><li><p><strong>Frequency():</strong> The time duration needed to complete one full cycle of revolution.</p></li><li><p><strong>Frequency (f):</strong>Thenumberofcompleterevolutionsaccomplishedperunittime.</p></li><li><p>SIUnitoffrequency:hertz():</strong> The number of complete revolutions accomplished per unit time.</p></li><li><p>SI Unit of frequency: hertz (Hz),equaltoinverseseconds(), equal to inverse seconds (s^{-1}):    ):     T = \frac{1}{f}        f = \frac{1}{T}</p></li><li><p><em>SampleProblem1(RotationalFrequencyofEarth):</em></p></li><li><p>Earthcompletesonerotationin</p></li><li><p><em>Sample Problem 1 (Rotational Frequency of Earth):</em></p></li><li><p>Earth completes one rotation in24\,\text{hours}((86,400\,s):      ):       f = \frac{1}{86,400\,s} = 1.16 \times 10^{-5}\,Hz</p></li></ul></li><li><p><strong>AngularDisplacementandRadianMeasure:</strong></p><ul><li><p>Rotationalprogressistrackedbytheangulardisplacement</p></li></ul></li><li><p><strong>Angular Displacement and Radian Measure:</strong></p><ul><li><p>Rotational progress is tracked by the angular displacement\theta.</p></li><li><p>Theradian(.</p></li><li><p>The radian (\text{rad})isdefinedgeometricallyastheratioofcirculararclength() is defined geometrically as the ratio of circular arc length (s)toradius() to radius (r):    ):     \theta = \frac{s}{r}    whereanarclengthequaltotheradius(    where an arc length equal to the radius (s = r)subtendsanangleofexactly) subtends an angle of exactly1\,\text{radian}.</p></li><li><p>Fullcircularequivalence:    .</p></li><li><p>Full circular equivalence:     1\,\text{revolution} = 360^\circ = 2\pi\,\text{radians}</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/4129dad4−1b4b−4a93−aea1−87d187cf3a9e−figures/6.jpg"data−width="50</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/6.jpg" data-width="50%" data-align="center" alt="Riders on a carousel tracing out an angular displacement" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/7.png" data-width="50%" data-align="center" alt="Relationship between radius, arc length, and angle" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Angular Velocity and Acceleration:</strong></p><ul><li><p><strong>Angular Speed (\omega):</strong>Therateofangulardisplacementperunittime:    ):</strong> The rate of angular displacement per unit time:     \omega = \frac{\theta}{t}</p></li><li><p><strong>AngularFrequency:</strong>Thenumberofradianstraversedpersecond:    </p></li><li><p><strong>Angular Frequency:</strong> The number of radians traversed per second:     \omega = 2\pi f = \frac{2\pi}{T}</p></li><li><p><strong>AngularAcceleration(</p></li><li><p><strong>Angular Acceleration (\alpha):</strong>Thetimerateofchangeofangularvelocity:    ):</strong> The time rate of change of angular velocity:     \alpha = \frac{\Delta \omega}{\Delta t}</p></li></ul></li><li><p><strong>RotationalKinematicsEquations(Constant</p></li></ul></li><li><p><strong>Rotational Kinematics Equations (Constant\alpha):</strong></p><ul><li><p>Equationsdirectlymirroringlineartranslationalkinematics:    ):</strong></p><ul><li><p>Equations directly mirroring linear translational kinematics:     \omega = \omega_0 + \alpha t        \theta = \theta_0 + \frac{1}{2}(\omega_0 + \omega)t        \theta = \theta_0 + \omega_0 t + \frac{1}{2}\alpha t^2        \omega^2 = \omega_0^2 + 2\alpha(\theta - \theta_0)</p></li><li><p><em>SampleProblem3(Pitcher′sCurveball):</em></p></li><li><p>Abaseballleavesapitcher′shandwith</p></li><li><p><em>Sample Problem 3 (Pitcher's Curveball):</em></p></li><li><p>A baseball leaves a pitcher's hand with\omega_0 = 36.0\,rad/sandslowstoand slows to\omega = 34.2\,rad/soverovert = 0.595\,sduetoairfriction.</p></li><li><p>(a)Angularacceleration:      due to air friction.</p></li><li><p>(a) Angular acceleration:       \alpha = \frac{\omega - \omega_0}{t} = \frac{34.2\,rad/s - 36.0\,rad/s}{0.595\,s} = -3.03\,rad/s^2</p></li><li><p>(b)Revolutionscompletedbeforereachingthecatcher:      </p></li><li><p>(b) Revolutions completed before reaching the catcher:       \theta = \frac{1}{2}(\omega_0 + \omega)t = \frac{1}{2}(36.0\,rad/s + 34.2\,rad/s)(0.595\,s) = 20.8845\,rad            \text{Revolutions} = \frac{20.8845\,rad}{2\pi\,rad/rev} = 3.33\,rev</p></li></ul></li></ul><h3>TorqueandRotationalDynamics</h3><ul><li><p><strong>Torque(</p></li></ul></li></ul><h3>Torque and Rotational Dynamics</h3><ul><li><p><strong>Torque (\tau):</strong></p><ul><li><p>Torquequantifiesthecapabilityortendencyofanappliedforcetocauserotationalaccelerationaboutapivot.</p></li><li><p>Governedbyforcemagnitudeandradialleverarmlength():</strong></p><ul><li><p>Torque quantifies the capability or tendency of an applied force to cause rotational acceleration about a pivot.</p></li><li><p>Governed by force magnitude and radial lever arm length (r):    ):     \tau = r\,F</p></li><li><p>SIUnit:newton−meter(</p></li><li><p>SI Unit: newton-meter (N \cdot m).</p></li><li><p><strong>LeverPrinciple:</strong>Mechanicaladvantagereliesontorquebalancing.Asmallerforceoperatingoveranextendedleverarm().</p></li><li><p><strong>Lever Principle:</strong> Mechanical advantage relies on torque balancing. A smaller force operating over an extended lever arm (r_{\text{effort}})generatesanidenticaltorquetoamassiveloadsituatedclosetothefulcrum() generates an identical torque to a massive load situated close to the fulcrum (r_{\text{load}}).</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/4129dad4−1b4b−4a93−aea1−87d187cf3a9e−figures/10.jpg"data−width="50).</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/10.jpg" data-width="50%" data-align="center" alt="Forces applied at different radial distances on a revolving door" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/12.jpg" data-width="50%" data-align="center" alt="Simple lever lifting a heavy load about a fulcrum" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Newton's Second Law for Rotation:</strong></p><ul><li><p>Relates net external torque to the resulting angular acceleration via the rotational inertia of the system:     \sum \tau = I\,\alpha</p></li><li><p>Inthisrelationship,momentofinertia(</p></li><li><p>In this relationship, moment of inertia (I)replacesinertialmass() replaces inertial mass (m).</p></li></ul></li><li><p><strong>MomentofInertia().</p></li></ul></li><li><p><strong>Moment of Inertia (I):</strong></p><ul><li><p>Representsthegeometricdistributionofmassrelativetotherotationaxis.</p></li><li><p>Massconcentratedfarfromtherotationalaxisincreasesrotationalinertia,makingtheobjecthardertoaccelerateordecelerate.</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/4129dad4−1b4b−4a93−aea1−87d187cf3a9e−figures/13.png"data−width="50):</strong></p><ul><li><p>Represents the geometric distribution of mass relative to the rotation axis.</p></li><li><p>Mass concentrated far from the rotational axis increases rotational inertia, making the object harder to accelerate or decelerate.</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/13.png" data-width="50%" data-align="center" alt="Moments of inertia for various uniform rigid objects" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Standard Moments of Inertia for Uniform Bodies:</strong></p><ul><li><p>Hoop or thin cylindrical shell of radiusR:    :     I = M R^2</p></li><li><p>Soliddiskorcylinderofradius</p></li><li><p>Solid disk or cylinder of radiusR(centralaxis):    (central axis):     I = \frac{1}{2} M R^2</p></li><li><p>Soliddiskorcylinderofradius</p></li><li><p>Solid disk or cylinder of radiusR(axisalongrim):    (axis along rim):     I = \frac{3}{2} M R^2</p></li><li><p>Longthinrodoflength</p></li><li><p>Long thin rod of lengthL(axisthroughmidpoint):    (axis through midpoint):     I = \frac{1}{12} M L^2</p></li><li><p>Longthinrodoflength</p></li><li><p>Long thin rod of lengthL(axisatoneend):    (axis at one end):     I = \frac{1}{3} M L^2</p></li><li><p>Thinhollowsphericalshellofradius</p></li><li><p>Thin hollow spherical shell of radiusR:    :     I = \frac{2}{3} M R^2</p></li><li><p>Soliduniformsphereofradius</p></li><li><p>Solid uniform sphere of radiusR(centralaxis):    (central axis):     I = \frac{2}{5} M R^2</p></li><li><p>Soliduniformsphereofradius</p></li><li><p>Solid uniform sphere of radiusR(axisalongrim):    (axis along rim):     I = \frac{7}{5} M R^2</p></li><li><p>Flatrectangularplateofdimensions</p></li><li><p>Flat rectangular plate of dimensionsL \times W(axisthroughcenterinplaneparallelto(axis through center in plane parallel toW):    ):     I = \frac{1}{12} M L^2</p></li><li><p>Flatrectangularplateofdimensions</p></li><li><p>Flat rectangular plate of dimensionsL \times W(axisperpendiculartoplanethroughcenter):    (axis perpendicular to plane through center):     I = \frac{1}{12} M (L^2 + W^2)</p></li></ul></li></ul><h3>AngularMomentumandConservation</h3><ul><li><p><strong>AngularMomentum(</p></li></ul></li></ul><h3>Angular Momentum and Conservation</h3><ul><li><p><strong>Angular Momentum (L):</strong></p><ul><li><p>Therotationalanalogtolinearmomentum,representingthepersistenceofanobjecttosustainrotation:    ):</strong></p><ul><li><p>The rotational analog to linear momentum, representing the persistence of an object to sustain rotation:     L = I\,\omega</p></li><li><p>SIUnit:</p></li><li><p>SI Unit:kg \cdot m^2/s.</p></li><li><p><strong>Torque−MomentumRelation:</strong>Netexternaltorqueequalsthetimerateofchangeofangularmomentum:    .</p></li><li><p><strong>Torque-Momentum Relation:</strong> Net external torque equals the time rate of change of angular momentum:     \tau = \frac{\Delta L}{\Delta t}</p></li></ul></li><li><p><strong>SampleMomentumProblems:</strong></p><ul><li><p><em>SampleProblem4(SpinningDVD):</em></p></li><li><p>Auniformdiskofmass</p></li></ul></li><li><p><strong>Sample Momentum Problems:</strong></p><ul><li><p><em>Sample Problem 4 (Spinning DVD):</em></p></li><li><p>A uniform disk of massm = 16.0\,g = 0.016\,kg,radius, radiusR = 6.00\,cm = 0.060\,m,spinsat, spins at\omega = 125\,rad/s.</p></li><li><p>Momentofinertia:      .</p></li><li><p>Moment of inertia:       I = \frac{1}{2} M R^2 = \frac{1}{2}(0.016\,kg)(0.060\,m)^2 = 2.88 \times 10^{-5}\,kg \cdot m^2</p></li><li><p>Angularmomentum:      </p></li><li><p>Angular momentum:       L = I\,\omega = (2.88 \times 10^{-5}\,kg \cdot m^2)(125\,rad/s) = 0.00360\,kg \cdot m^2/s</p></li><li><p><em>SampleProblem5(TorqueonaCeilingFan):</em></p></li><li><p>Astationaryfan(</p></li><li><p><em>Sample Problem 5 (Torque on a Ceiling Fan):</em></p></li><li><p>A stationary fan (L_0 = 0)receivesconstanttorque) receives constant torque\tau = 1.9\,N \cdot macrossacrosst = 2.6\,s:      :       \Delta L = \tau \Delta t = (1.9\,N \cdot m)(2.6\,s) = 4.9\,kg \cdot m^2/s</p></li></ul></li><li><p><strong>ConservationofAngularMomentum:</strong></p><ul><li><p>Whenthenetexternaltorqueactingonasystemiszero(</p></li></ul></li><li><p><strong>Conservation of Angular Momentum:</strong></p><ul><li><p>When the net external torque acting on a system is zero (\sum \tau = 0),thetotalangularmomentumremainsstrictlyconservedovertime:    ), the total angular momentum remains strictly conserved over time:     \Delta L = 0        L_i = L_f        I_i \omega_i = I_f \omega_f</p></li></ul></li><li><p><strong>DirectionalConventionandtheRight−HandRule:</strong></p><ul><li><p>Rotationsaredefinedvectoriallyaseitherclockwiseorcounterclockwisealongtherotationalaxis.</p></li><li><p><strong>Right−HandRule:</strong>Curvingthefingersoftherighthandinthedirectionofrotationalspincausesthethumbtoextendalongthevectordirectionoftheangularmomentum(</p></li></ul></li><li><p><strong>Directional Convention and the Right-Hand Rule:</strong></p><ul><li><p>Rotations are defined vectorially as either clockwise or counterclockwise along the rotational axis.</p></li><li><p><strong>Right-Hand Rule:</strong> Curving the fingers of the right hand in the direction of rotational spin causes the thumb to extend along the vector direction of the angular momentum (\mathbf{L})andangularvelocity() and angular velocity (\boldsymbol{\omega}).</p></li></ul></li></ul><p></p><imgsrc="https://assets.knowt.com/pdf−flow−prod/4129dad4−1b4b−4a93−aea1−87d187cf3a9e−figures/15.jpg"data−width="50).</p></li></ul></li></ul><p></p><img src="https://assets.knowt.com/pdf-flow-prod/4129dad4-1b4b-4a93-aea1-87d187cf3a9e-figures/15.jpg" data-width="50%" data-align="center" alt="Right-hand rule for finding the direction of angular momentum" style="display: block; width: 50%; margin-left: auto; margin-right: auto;"><ul><li><p><strong>Sample Problem 6 (Rotational Collapse of a Stellar Core):</strong></p><ul><li><p>A star possessing initial radiusR_i = 2.3 \times 10^8\,mrotateswithinitialangularspeedrotates with initial angular speed\omega_i = 2.4 \times 10^{-6}\,rad/s.</p></li><li><p>Thestarcollapsessymmetricallywithoutmasslosstoradius.</p></li><li><p>The star collapses symmetrically without mass loss to radiusR_f = 20.0\,km = 2.00 \times 10^4\,m.</p></li><li><p>Treatingthestellarbodyasauniformsolidsphere(.</p></li><li><p>Treating the stellar body as a uniform solid sphere (I = \frac{2}{5}M R^2):    ):     I_i \omega_i = I_f \omega_f        \left(\frac{2}{5}M R_i^2\right) \omega_i = \left(\frac{2}{5}M R_f^2\right) \omega_f        R_i^2 \omega_i = R_f^2 \omega_f        \omega_f = \omega_i \left(\frac{R_i}{R_f}\right)^2        \omega_f = (2.4 \times 10^{-6}\,rad/s) \left(\frac{2.3 \times 10^8\,m}{2.00 \times 10^4\,m}\right)^2        \omega_f = (2.4 \times 10^{-6})(1.15 \times 10^4)^2 = (2.4 \times 10^{-6})(1.3225 \times 10^8) \approx 320\,rad/s$$

    • The extreme reduction in radius drastically decreases the moment of inertia, spinning up the dense remnant into a rapidly rotating pulsar.


Collapsing rotating stellar core