Comprehensive Study Guide: Unit 2 Earthquakes, Fault Mechanics, and Seismic Measurement Scales
Plate Tectonic Foundations & Earthquake Fundamentals
Structure of Earth's Crust:
- Earth's crust is not a single solid shell; rather, it consists of large, interconnecting pieces called tectonic plates that fit together like a puzzle.
- These tectonic plates float and move atop the underlying mantle, which is composed of a thick layer of hot, flowing rock known as magma.
- The movement of these tectonic plates generates immense forces in the crust that ultimately cause earthquakes felt across the Earth's surface.
Core Definitions:
- Earthquake: Violent shaking of Earth's crust caused by the sudden release of energy or stress along rock fractures.
- Fault: Large cracks or fractures in the Earth's crust along which movement occurs.
- Seismology: The scientific study of earthquakes and seismic waves.
- Seismologists: Scientists who specialize in the scientific study of earthquakes.
Geological Fault Mechanics and Boundary Classifications

Structural Components of Dip-Slip Faults:
- Foot Wall: The block or piece of crust below the angled fault plane. During fault displacement, this piece of crust does NOT move vertically relative to the fault surface (it stays stationary relative to the hanging wall's movement or moves up and away in normal faulting, and stays/moves down in thrust faulting).
- Hanging Wall: The block or piece of crust above the angled fault plane. During fault displacement, this piece of crust DOES move up or down along the fault line.
Types of Faults:
- Normal Fault:
- Plate Boundary Correlation: Associated with Divergent plate boundaries.
- Tectonic Force: Created by tension forces in the crust where rock is pulled apart, causing the fault to form and spread.
- Physical Kinematics: Inclined fractures where crustal blocks shift downward; the hanging wall moves down while the foot wall stays or moves up and away.
- Thrust Fault (Reverse Fault):
- Plate Boundary Correlation: Associated with Convergent plate boundaries.
- Tectonic Force: Created by compression forces in the crust where rock is squished or pushed together.
- Physical Kinematics: A dip-slip fault system where the hanging wall moves up and over the foot wall (the foot wall stays or moves down).
- Alternative Naming: Also explicitly referred to as a Reverse Fault.
- Strike-Slip Fault:
- Plate Boundary Correlation: Associated with Transform plate boundaries.
- Tectonic Force / Geometry: Usually created by a vertical fault line rather than an angled fault plane as seen in Normal and Thrust Faults.
- Physical Kinematics: Involves horizontal sliding of two blocks or pieces of crust past each other in opposite horizontal directions.
- Prominent Regional Example: The San Andreas Fault located in California.
- Normal Fault:
Deformation Folds in Rock Strata:
- Anticline: An upward fold of rock shaped like a ridge where the rock strata slope downward away from the crest or central axis.
- Syncline: A downward fold of rock where the rock strata slope upward away from the center or axis.
Seismic Wave Dynamics & Instrumentation
Spatial Origins of Seismic Activity:
- Focus: The point or location beneath Earth's surface where rock under stress breaks and pressure/energy is released during an earthquake.
- Epicenter: The point directly on Earth's surface located perpendicularly above the focus.
Classification of Seismic Waves:
- Seismic Waves: Energy waves that spread out in all directions from the focus, behaving similarly to ripples spreading through a pond.
- Primary Waves (P-waves):
- Compression waves that stretch, compress, and expand the material they pass through.
- Capable of traveling through both solids and liquids.
- Travel faster than all other types of seismic waves.
- Secondary Waves (S-waves):
- Shear waves that move land and material side to side.
- Travel strictly through solids only (cannot pass through liquids).
- Travel slower than P-waves.
- Surface Waves:
- Waves on Earth's surface that originate outward from the epicenter.
- Travel slower than both Primary (P) and Secondary (S) waves.
- Produce severe ground movement with a wavelike motion.
- Land Waves (L-waves):
- Waves created specifically when P-waves and S-waves combine at the surface, moving the land up and down.
Seismic Recording Instrumentation:
- Seismograph (Seismometer): An instrument or device used to measure and record seismic waves, calculating the force, maximum wave amplitude, and duration of an earthquake.
- Seismogram: The physical or digital record trace produced by a seismograph.
Quantitative Earthquake Scales: Richter Scale & Moment Magnitude Scale (MMS)

Earthquake Magnitude Definition:
- Magnitude: A quantitative metric representing the overall strength or energy of an earthquake.
The Richter Magnitude Scale:
- Historical Development: Developed in by seismologists Charles Richter and Beno Gutenberg to measure earthquakes occurring in southern California.
- Astronomical Model: Modeled after the magnitude scale used by astronomers to measure the brightness of stars.
- Measurement Basis: Uses a seismometer to calculate the maximum amplitude of earthquake waves.
- Scale Range & Technological Progression:
- Originally established on a numerical scale from (smallest magnitude) to (largest magnitude).
- At the time of development in , seismometers could only detect values as low as , which prevented negative values from being recorded.
- Modern seismometers can detect earthquakes so small that they register as negative values on Richter's scale.
The Moment Magnitude Scale (MMS):
- Historical Replacement: Developed during the to replace the original Richter scale.
- Geological Adjustments: Takes into account different geological conditions around the world to provide standardized comparisons across global fault systems.
- Measurement Basis: Measures the total energy released by an earthquake related to the movement of the crust.
- Scale Standardization: Retains the standard through numerical scale, producing values that are generally very similar to Richter scale results while offering greater global precision.
- Current Scientific Standard: Formally adopted and utilized by the United States Geological Survey (USGS) when reporting earthquakes.
Global Earthquake Frequency by Richter/MMS Magnitude:
- Magnitude to : Greatly minor activity; approximately earthquakes per year worldwide.
- Magnitude : Minor activity; approximately earthquakes per year worldwide.
- Magnitude : Minor earthquake felt by humans; approximately earthquakes per year worldwide.
- Magnitude : Light earthquake causing some property damage; approximately earthquakes per year worldwide.
- Magnitude : Moderate earthquake causing notable property damage; approximately earthquakes per year worldwide.
- Magnitude : Strong earthquake causing major structural destruction; approximately earthquakes per year worldwide.
- Magnitude : Major earthquake causing severe widespread destruction; approximately earthquakes per year worldwide.
- Magnitude to : Great earthquake causing near-total destruction; fewer than () earthquake per year worldwide.
Qualitative Earthquake Intensity: Mercalli Intensity Scale
Overview and Measurement Basis:
- Measurement Target: Measures the observable effects and intensity of an earthquake on the Earth's surface, man-made structures, objects of nature, and human populations (unlike energy-based magnitude scales).
- Historical Development: Originally developed as a -step scale in the late by volcanologist Giuseppe Mercalli.
- Revision: Revised and expanded to a -step scale in by Italian physicist Adolfo Cancani.
- Notation: Represented exclusively using Roman Numerals from to .
Step-by-Step Mercalli Intensity Classifications:
- (Not Felt): Generally not felt by people.
- (Weak): Felt by few people; some delicate objects may slightly swing.
- (Slight): Felt by people indoors; vibrations are similar to a passing truck.
- (Moderate): Felt by all people indoors and some outdoors; dishes and windows rattle; no structural damage occurs.
- (Rather Strong): Felt by all people; dishes and windows break; possible slight damage to buildings.
- (Strong): Felt by all and causes fright; glassware and windows break; slight to moderate damage to buildings.
- (Very Strong): Difficult for people to stand; furniture breaks; considerable damage to older buildings; noticed by people driving cars.
- (Destructive): Some collapsed buildings; possible fall of chimneys and factory stacks; heavy furniture moved.
- (Violent): General panic; damage moderate to great in buildings; walls can fall or collapse.
- (Intense): Most well-built structures destroyed; large landslides on hills or mountains.
- (Extreme): Few, if any structures remain standing; numerous landslides and cracks open on the surface.
- (Catastrophic): Total destruction; everything is destroyed; objects thrown through the air; ground has visibly moved.