Calculus: One-Sided Limits, Infinite Limits, and Oscillating Discontinuities
Fundamentals of Limits and One-Sided Limits
Definition of One-Sided Limits:
- The left-hand limit, denoted as , describes the value that approaches as approaches from values strictly smaller than .
- The right-hand limit, denoted as , describes the value that approaches as approaches from values strictly greater than .
The Existence Criterion for Regular (Two-Sided) Limits:
- A regular two-sided limit exists if and only if both one-sided limits exist and are equal to the same real number :
- Non-Existence Rule: If the left-hand limit and right-hand limit approach different values (), then the two-sided limit does not exist (DNE).
Graphical Example Breakdown:
- For a given function graph evaluated at :
- Approaching from the left gives .
- Approaching from the right is evaluated separately to determine if matches the left-hand limit.
- If the behavior from the right approaches a different value, the two-sided limit does not exist.
Infinite Limits and Vertical Asymptotes
Behavior Near Zero Denominators:
- When evaluating a rational expression as approaches a value that makes the denominator equal to (while the numerator remains non-zero), the magnitude of the fraction grows arbitrarily large, approaching positive or negative infinity ().
- For instance, evaluating values approaching from the left (e.g., starting at , then testing numbers like , , ):
- As gets closer to , the magnitude of the denominator gets closer and closer to .
- As the denominator shrinks toward , the overall fraction grows extremely large in absolute value.
Determining the Sign of Infinite Limits:
- To determine whether a limit goes to or , analyze the algebraic sign of the numerator and denominator for sample values near the limit point:
- Left of : Testing values less than (e.g., ) determines whether the denominator approaches zero through negative or positive values.
- Right of : Testing values greater than (e.g., ):
- Plugging in yields a positive numerator and a positive denominator.
- Since , the values approach .
Condition for Vertical Asymptotes:
- A function has a vertical asymptote at if at least one of the one-sided limits approaches or :
- Caveat: A value of that causes the denominator to equal does not automatically guarantee a vertical asymptote; the limit behavior must always be explicitly checked to rule out removable discontinuities.
Trigonometric Limit Analysis: Tangent at Pi Halves
Zeroes of the Cosine Function:
- The cosine function satisfies at all odd integer multiples of , specifically at , , , etc.
Unit Circle Definition of Tangent:
- Tangent is defined as the ratio .
- On the unit circle, for an angle in radians:
- The -coordinate corresponds to .
- The -coordinate corresponds to .
- Note: The variable inside represents the input angle in radians, which must not be confused with the spatial -coordinate of a point on the unit circle.
Behavior as (Left-Sided Approach):
- The angle approaches from the left through the First Quadrant ().
- The -coordinate () decreases toward through positive values ().
- The -coordinate () increases toward through positive values ().
- Ratio behavior: .
Behavior as (Right-Sided Approach):
- The angle approaches from the right through the Second Quadrant ().
- The -coordinate () approaches through negative values ().
- The -coordinate () remains positive and approaches ().
- Ratio behavior: \tan(x) = \frac{\sin(x)}{\cos(x)} \to \frac{\text{positive}}{\text{negative}} = -\infty$.\n\n- **Conclusion for Tangent Asymptotes**:\n - Because \lim_{x \to (\pi/2)^-} \tan(x) = +\infty\lim_{x \to (\pi/2)^+} \tan(x) = -\inftyx = \frac{\pi}{2}\tan(x).\n - A single infinite one-sided limit is sufficient to prove the presence of a vertical asymptote, but evaluating both sides provides the complete picture of how the graph behaves around x = \frac{\pi}{2}.\n - This proof method applies identically to establish vertical asymptotes for \tan(x)x = \frac{\pi}{2} + k\pik.\n\n# Graphical Verification of Trigonometric Behavior\n\n- **Sine Function Graph Behavior near x = \frac{\pi}{2}**:\n - The graph of \sin(x)(0,0)1x = \frac{\pi}{2}.\n - Approaching x = \frac{\pi}{2}\sin(x)y1.\n - Approaching x = \frac{\pi}{2}\sin(x)y1.\n\n- **Cosine Function Graph Behavior near x = \frac{\pi}{2}**:\n - The graph of \cos(x)(0,1)xx = \frac{\pi}{2}.\n - Approaching x = \frac{\pi}{2}\cos(x)0x--axis).\n - Approaching x = \frac{\pi}{2}\cos(x)0x--axis).\n\n# Pitfalls of the Table Method and Infinitely Oscillating Functions\n\n- **Analysis of the Function f(x) = \sin\left(\frac{\pi}{x}\right)**:\n - Consider evaluating \lim_{x \to 0} \sin\left(\frac{\pi}{x}\right).\n - Constructing a numerical table using sample inputs approaching 0 from the right:\n - For x = 1f(1) = \sin(\pi) = 0\n - For x = \frac{1}{2}f\left(\frac{1}{2}\right) = \sin\left(\frac{\pi}{1/2}\right) = \sin(2\pi) = 0\n - For x = \frac{1}{10}f\left(\frac{1}{10}\right) = \sin(10\pi) = 0\n - For x = \frac{1}{100}f\left(\frac{1}{100}\right) = \sin(100\pi) = 0\n - For x = \frac{1}{1000}f\left(\frac{1}{1000}\right) = \sin(1000\pi) = 0\n - **The False Conclusion**: The table values strongly suggest that the limit is 0.\n\n- **Why the Table Method Fails for Oscillating Functions**:\n - The function f(x) = \sin\left(\frac{\pi}{x}\right)x = 0.\n - As x0\sin\left(\frac{\pi}{x}\right)1-1 infinitely many times.\n - The function exhibits symmetry on the negative side (x < 0) as well.\n - Because f(x)1-1\lim_{x \to 0} \sin\left(\frac{\pi}{x}\right) **does not exist (DNE)**.\n - **Cause of Table Failure**: The chosen inputs x = 1, \frac{1}{2}, \frac{1}{10}, \frac{1}{100}, \dotsx\sin(n\pi) = 01-1).\n\n# Distinction Between Oscillating Discontinuities and Removable Discontinuities\n\n- **Analysis of \lim_{x \to 0} \frac{\sin(x)}{x}**:\n - Direct substitution at x = 0\frac{0}{0}x = 0$.
- Examining the graphical behavior of as approaches from both the left and right sides:
- The --values on both sides smoothly level off and approach .
- Thus, .
- Unlike , which oscillates infinitely near , has a removable discontinuity (a single hole in the graph at ).
- In cases with removable discontinuities, table and graphical methods reliably indicate the correct limiting value.