Kinematics: Rest and Motion Study Notes for Physics of Motion Study Guide
Rest and Motion Concepts
Definition of Rest and Motion: A body is said to be at rest if it does not change its position as time passes. If a body changes its position with time, it is said to be moving.
Relativity of Rest and Motion: Rest and motion are combined properties of the object under study and the observer. There is no such thing as absolute rest or absolute motion.
The Moon Example: A book on a table is at rest relative to the room. However, if viewed from the moon, the whole Earth, including the room and the book, is constantly moving.
The Robber Example: A robber on a speeding train tells passengers "Don't move, stand still." Relative to the robber, the passengers are at rest; relative to the rail track, the passengers are moving at the train's speed.
Frame of Reference: To locate a particle's position, a frame of reference is required.
A common method is choosing three mutually perpendicular axes (X, Y, and Z axes).
The coordinates (x,y,z) specify the position relative to that frame.
A clock is added to the frame to measure time (t).
Criteria for State:
Rest: If all three coordinates (x,y,z) remain unchanged over time.
Motion: If any one or more coordinates change with time.
Choice of Frame: There is no restriction on the choice. It is usually chosen based on convenience (e.g., choosing a frame attached to the compartment while inside a train).
Common Contexts: When someone says a car is traveling, it is implied that the frame of reference is the road. When in a train, one might say "Bombay is coming" or "Pune has passed," effectively using the train as the frame of reference.
Distance and Displacement
Distance: The total length of the path traversed by a particle during a specific time interval (e.g., path length ACB between point A and point B).
Distance is a scalar quantity, possessing only magnitude.
Displacement: The straight-line distance connecting the initial position (A) to the final position (B).
The magnitude is the length of this straight line.
The direction is from the initial point to the final point.
Displacement is a vector quantity and follows the triangle rule of vector addition.
Net Displacement Example: If a particle on a table is moved, and the table itself is moved within the room, the net displacement of the particle in the room is the vector sum of these two displacements.
Quantitative Example (Circular Track): An old person walks half a circle (semi-circular track) of radius R=40.0m.
Distance: π×R=π×40.0m=126m.
Displacement: Diameter of the track = 2×R=2×40.0m=80m.
Speed: Average and Instantaneous
Average Speed (vav): Defined as the total distance travelled (s) divided by the time interval (t2−t1).
Formula: vav=t2−t1s.
It describes the overall "rapidity" of motion (similar to a run rate in cricket).
Instantaneous Speed (v): The speed at a specific instant of time t.
Let Δs be distance in time interval Δt. As Δt approaches zero, the ratio ΔtΔs has a finite limit.
Formula: v=limΔt→0ΔtΔs=dtds.
Geometrically, speed is the slope of the tangent to the curve on a distance-time graph.
Total Distance from Speed: Summing small distances ds=vdt over a finite interval.
Formula: s=∫t1t2vdt.
The area under a speed-time graph represents the total distance travelled.
Dimensions and Units:
Dimension: LT−1.
SI Unit: metre/second (m/s).
Velocity: Average and Instantaneous
Average Velocity (vav): Displacement divided by the time interval.
Formula: vav=t2−t1AB=t2−t1r2−r1, where r1 and r2 are position vectors at t1 and t2.
Only the initial and final positions matter; the actual path taken is irrelevant.
Instantaneous Velocity (v): The rate of change of the position vector with respect to time.
Formula: v=limΔt→0ΔtΔr=dtdr.
The magnitude of instantaneous velocity is equal to the instantaneous speed: v=∣dtdr∣=dtds.
Example (Table Clock): Minute hand is 4.0cm long. From 6:00 a.m. to 6:30 a.m.:
Displacement: 8.0cm (diameter).
Time: 1800s.
Average Velocity: 8.0cm/1800s=4.4×10−3cm/s.
From 6:00 a.m. to 6:30 p.m. (12h30min=45000s): 8.0cm/45000s=1.8×10−4cm/s.
Acceleration: Average and Instantaneous
Uniform Velocity: Velocity remains constant over time.
Accelerated Motion: Velocity changes over time (in magnitude, direction, or both).
Average Acceleration (aav): Change in velocity divided by the time interval.
Formula: aav=t2−t1v2−v1.
Instantaneous Acceleration (a): The rate of change of velocity at an instant.
Formula: a=limΔt→0ΔtΔv=dtdv.
Dimensions and Units:
Dimension: LT−2.
SI Unit: metre/second2 (m/s2).
Motion in a Straight Line
Basic Relations:
v=dtdx.
a=dtdv=dt2d2x.
Sign Convention:
If dtdx>0, velocity is along positive X-axis.
If dtdv>0, acceleration is along positive X-axis.
Speed increases if velocity and acceleration have the same sign (both positive or both negative).
Deceleration: Occurs when velocity and acceleration have opposite signs. It is equivalent to negative acceleration.
Constant Acceleration Equations:
v=u+at
x=ut+21at2
v2=u2+2ax
Note: x represents position at time t, not necessarily total distance covered if the particle turns back.
Calculating Displacement in the "t-th second":
The formula often used is st=u+2a(2t−1), but this is dimensionally incorrect.
Correct form: st=u(1s)+2a(2t−1s)(1s).
Freely Falling Bodies
Conditions: Vertical motion under gravity, neglecting air resistance, height is small compared to Earth's radius.
Acceleration due to Gravity (g): Magnitude is approximately 9.8m/s2 (or 32ft/s2).
Coordinate Choice:
Vertical Upward as Positive Y: a=−g.
v=u−gt
y=ut−21gt2
v2=u2−2gy
Vertical Downward as Positive Y: a=g.
v=u+gt
y=ut+21gt2
v2=u2+2gy
Maximum Height Reach Example: Throwing a ball at 4.0m/s upward (g=10m/s2).
At peak, v=0. Using 0=(4.0)2+2(−10)y, peak height y=0.80m.
Motion in a Plane
Resolution of Motion: A 2D problem is broken into two independent 1D problems along the X and Y axes.
Velocity Components:
v=dtdxi+dtdyj.
vx=dtdx, vy=dtdy.
Acceleration Components:
a=dtdvxi+dtdvyj=axi+ayj.
Constant Acceleration in X-Y Plane:
vx=ux+axt; x=uxt+21axt2
vy=uy+ayt; y=uyt+21ayt2
Vector Magnitude: Speed v=vx2+vy2; Direction tan(θ)=vxvy.
Projectile Motion
Definition: A particle thrown obliquely near Earth's surface moves in a curved path under constant downward acceleration g.
Time of Flight (T): Total time to return to initial horizontal plane.
T=g2usin(θ).
Horizontal Range (R): Horizontal distance covered in time T.
R=gu2sin(2θ).
Maximum Height (H): Height where vy=0.
H=2gu2sin2(θ).
Time to reach peak: tpeak=gusin(θ)=2T.
Change of Reference Frame (Relative Motion)
Vector Relations:
Position: rP,S=rP,S′+rS′,S.
Velocity: vP,S=vP,S′+vS′,S.
The velocity of a particle relative to frame S equals its velocity relative to frame S′ plus the velocity of S′ relative to S.
Calculating Body 1 relative to Body 2: v1,2=v1−v2.
Assumptions: These formulas assume frames only translate relative to each other with a small velocity (much less than speed of light 3×108m/s) and do not rotate.
Acceleration: aP,S=aP,S′+aS′,S.
If S′ moves with uniform velocity relative to S, then aP,S=aP,S′.
Common Applications:
Bullet/Train: Muzzle velocity is respect to the gun. Ground velocity = Gun velocity + Muzzle velocity.
River/Swimmer: Velocity of swimmer relative to ground = Velocity relative to water + Velocity of water.
Rain/Man: vrain,man=vrain,ground−vman,ground.
Comprehensive Problem Solving and Examples
Example 3.10 (Swimmer): Swims at 4.0km/h perpendicular to a river flowing at 3.0km/h.
Ground Speed: 4.02+3.02=5.0km/h.
Angle with flow: tan(θ)=4/3.
Example 3.11 (Rain): Man walks at 3.0km/h; Rain falls vertically at 4.0km/h.
Apparent velocity of rain: 42+32=5.0km/h.
Angle with vertical: tan(θ)=3/4.
Worked Example 8 (Fly and Car): A car moves at 40km/h toward a wall 20km away. A fly moves between the car and wall at 100km/h.
Total time available: 20km/40km/h=0.5h.
Total distance fly travels: 100km/h×0.5h=50km.
Number of trips: Infinite (as the distance between wall and car approaches zero).
Worked Example 20 (Three Particles): A, B, and C at corners of an equilateral triangle (side d) move toward each other at speed v.
They meet at the centroid.
Rate of decrease of separation: (v+vcos(60∘))=3v/2.
Time to meet: t=3v/2d=3v2d.
Questions & Discussion
Galileo and the Church: Debate over Sun-centric vs Earth-centric views. While motion is relative, the choice of the Sun as an approximately inertial frame simplifies physical laws (like gravitation).
Velocity Comparisons: A car going 60km/h North and another going 60km/h East have equal speed but unequal velocities due to direction.
Smallest Projectile Speed: Speed is minimum at the highest point of the path (only horizontal component ucos(θ) exists).
Acceleration Scenarios:
Velocity zero, acceleration non-zero: Peak of a vertical throw.
Velocity opposite to acceleration: Object being thrown upward (moving up, acceleration down).
Velocity perpendicular to acceleration: Projectile at its peak or uniform circular motion.
Displacement Comparison: If a ball is hit in baseball and caught, the player and the ball have identical displacements (same starting and ending points).
Deceleration vs. Speeding Down: Deceleration is simply negative acceleration. A particle "speeds down" when its velocity and acceleration have opposite signs.