BIO 131 Practice Questions


Question 1

Accuracy is getting the same answer over and over.

A) True

B) False

Question 2

Precision is getting the correct or right answer over and over.

A) True

B) False

Question 3

In the lab, a measurement was taken three times. The correct measurement is 72.5 mL. The data collected is: 72.2 mL, 72.4 mL, 72.8 mL. This set of measurements is:

A) both accurate and precise

B) precise not accurate

C) accurate not precise

D) neither accurate nor precise

Question 4

In the lab, a measurement was taken three times. The correct measurement is 72.5 mL. The data collected is: 81.8 mL, 80.8 mL, 81.1 mL. This set of measurements is:

A) accurate and precise

B) accurate not precise

C) neither accurate nor precise

D) precise not accurate

Question 5

In the lab, a measurement was taken three times. The correct measurement is 72.5 mL. The data collected is: 72.4 mL, 70.5 mL, 74.5 mL. This set of measurements is:

A) accurate and precise

B) accurate not precise

C) precise not accurate

D) neither accurate nor precise

Question 6

You repeatedly weigh a penny on two different scales. The true weight of the penny is 1.35 g. Scale 1 reads: 1.0 g, 1.1 g, and 0.9 g. Scale 2 reads: 1.0 g, 1.6 g, and 1.3 g. Which of the following statements is most correct?

A) The first scale is not very precise; the second scale is more accurate.

B) The first scale is not very accurate; the second scale is more accurate.

C) Both scales are accurate

D) Both scales are precise

Question 7

How many significant figures does this measurement have? 0.0450 g

A) 2

B) 5

C) 4

D) 3

Question 8

How many significant figures does this measurement have? 1.050 mg

A) 2

B) 4

C) 3

D) 5


🧮 Section 2: Dilution & Concentration Math

Question 9

You need to dilute an 8M stock solution by a total dilution factor of 1:10,000 to make 10 mL of a 0.0008M working solution using a 1:10 serial dilution. Which of the following descriptions accurately outlines this process?

A) Mix 1 mL of 8M stock into 9 mL of water, then transfer 1 mL of that sequentially through 3 more tubes containing 9 mL of water each. Total steps = 4 tubes. Each tube is a 1:10 dilution.

B) Mix 2 mL of 8M stock into 8 mL of water, then transfer 2 mL sequentially through 3 tubes containing 8 mL of water.

C) Mix 1 mL of 8M stock directly into 10,000 mL of water.

D) Mix 0.1 mL of 8M stock into 9.9 mL of water.

Question 10

You have a 6M concentration of stock solution and you need 100 microliters of a 0.000006M solution. What is the total dilution factor required?

A) 1:1,000

B) 1:10,000

C) 1:1,000,000

D) 1:100,000

Question 11

You need to dilute a 10M stock solution by a dilution factor of 1:1,000 to make 1,000 μL\mu\text{L} of a 0.01M working solution using a 1:10 serial dilution series. How should this be executed?

A) Add 100 μL\mu\text{L} of stock to 900 μL\mu\text{L} of water (Tube 1), transfer 100 μL\mu\text{L} from Tube 1 to 900 μL\mu\text{L} of water (Tube 2), then transfer 100 μL\mu\text{L} from Tube 2 to 900 μL\mu\text{L} of water (Tube 3).

B) Add 10 μL\mu\text{L} of stock directly to 990 μL\mu\text{L} of water.

C) Add 1 μL\mu\text{L} of stock directly to 999 μL\mu\text{L} of water.

D) Mix 500 μL\mu\text{L} of stock with 500 μL\mu\text{L} of water over 3 cycles.

Question 12

I have a stock solution of 100x concentration and I want to prepare 10 mL of a 1x working solution. Calculate the initial volume of stock (V1V_1) needed using the simple dilution equation C1V1=C2V2C_1V_1 = C_2V_2:

A) 1.0 mL

B) 0.1 mL

C) 0.01 mL

D) 10 mL


📏 Section 3: Metric Conversions & Scientific Notation

Question 13

765,000 written in proper scientific notation is:

A) 7.65×10−37.65 \times 10^{-3}

B) 7.65×1067.65 \times 10^6

C) 765×103765 \times 10^3

D) 7.65×1057.65 \times 10^5

Question 14

Which of these statements is INCORRECT?

A) liter >> milliliter

B) 1 million microliters in a liter

C) 1000 microliters in a mL

D) mL >> μL\mu\text{L} >> L

Question 15

There are 100 grams in a kilogram.

A) True

B) False

Question 16

1.000 mL is equal to:

A) 100.0 μL\mu\text{L}

B) 10000 μL\mu\text{L}

C) 1000 μL\mu\text{L}

D) 100 μL\mu\text{L}

Question 17

200 μL\mu\text{L} is the exact same volume as:

A) 0.200 mL

B) 0.020 mL

C) 0.002 mL

D) 2.000 mL

Question 18

Which of these metric scenarios is impossible?

A) 10 mg = 10,000 μg\mu\text{g}

B) 10 grams = 10,000 mg

C) 100 grams = 100,000 mg

D) 1000 grams = 100 μg\mu\text{g}

Question 19

0.795 mL = _______________ μL\mu\text{L}

A) none of the answers are correct

B) 795

C) 0.00795

D) 79.5

Question 20

4756 μL\mu\text{L} = __________________ mL

A) 47.56

B) 0.4756

C) 4.756

D) 475.6

Question 21

504 in correct scientific notation is:

A) 5.04×10−15.04 \times 10^{-1}

B) 5.04×10−25.04 \times 10^{-2}

C) 5.04×1025.04 \times 10^2

D) 50.4×10150.4 \times 10^1

Question 22

There are 10 micrograms (μg\mu\text{g}) in a gram.

A) True

B) False

Question 23

The prefix milli- in front of a base unit means 1/1,000. The prefix micro- in front of a base unit means 1/1,000,000.

A) True

B) False

Question 24

0.040 mL = _________________ μL\mu\text{L}

A) 40000

B) 4

C) 400

D) 40

Question 25

0.06809 in correct scientific notation is:

A) 68.09×10−368.09 \times 10^{-3}

B) 6.809×10−26.809 \times 10^{-2}

C) 6.809×1026.809 \times 10^2

D) 6.809×10−16.809 \times 10^{-1}

Question 26

Which of these matches is correct?

A) 100 μL\mu\text{L} = 1 mL

B) 100 μL\mu\text{L} = 1 L

C) 1000 mL = 1 liter

D) 1000 μL\mu\text{L} = 1 liter


🧪 Section 4: pH, Buffers, & Chemical Bonds

Question 27

Relative to a pH of 6, a pH of 4 has a:

A) 200 times higher H+H^+ concentration

B) 100 times lower H+H^+ concentration

C) 20 times higher H+H^+ concentration

D) 100 times higher H+H^+ concentration

Question 28

When a base is added to a buffered solution, the buffer will immediately:

A) donate H+H^+ ions

B) form covalent bonds with the base

C) accept water molecules

D) donate OH−OH^- ions

Question 29

In the lab, you can measure pH with which of the following? (Select ALL that apply)

A) pH paper

B) An indicator dye

C) A pH meter

Question 30

The lower the pH of a solution, the:

A) more acidic the solution

B) higher the OH−OH^- concentration

C) less toxic the solution

D) greater the number of oxygen atoms

Question 31

The primary biological function of a chemical buffer is to:

A) maintain the pH of a solution within a stable range

B) act as a strong acid to break down structures

C) change color at the end point of a titration

D) maintain a neutral pH of exactly 7.0 at all times

Question 32

What name is given to chemical substances that actively resist shifts in pH?

A) bases

B) sugars

C) salts

D) buffers

Question 33

Which of these descriptions is true about buffers? (Select ALL that apply)

A) They are always either a strong acid or a strong base

B) They maintain the pH of a solution both in vivo (inside living cells) and in vitro (inside lab glassware)

C) They are mixtures of weak acids and weak bases

Question 34

A base operates chemically by doing which of the following?

A) removes H+H^+ ions from a solution

B) removes H2OH_2O molecules from a solution

C) decreases the pH of a solution

D) removes OH−OH^- ions from a solution


🧬 Section 5: Macromolecules, Proteins, & Genetics

Question 35

What is the name given to the metabolic reaction that breaks peptide bonds down using water?

A) hydrogenation

B) hydrolysis

C) denaturation

D) dehydration reaction

Question 36

Nucleic acids are long polymers built out of which repeating monomers?

A) fatty acids

B) nucleotides

C) monosaccharides

D) amino acids

Question 37

The secondary and tertiary structure of a protein can be disrupted by high heat, causing it to unfold. This process is called:

A) melting

B) denaturation

C) deconstruction

D) deamidation

Question 38

Which of the following interactions contribute directly toward stabilizing the 3D tertiary structure of a protein?

A) Hydrophilic interactions

B) Acidic and basic side-chain interactions

C) Hydrophobic core packaging of R-groups

D) All of the above

Question 39

What is a major operational difference between embryonic and adult stem cells?

A) It is easier to enucleate embryonic stem cells.

B) Embryonic stem cells are completely undifferentiated; adult stem cells are partially differentiated.

C) Adult stem cells are easier to grow in culture.

D) Embryonic stem cells can only form blood tissues.

Question 40

DNA nucleotides include which selection of chemical bases?

A) uracil, guanine, adenine, and cytosine

B) thymine, uracil, adenine, and cytosine

C) thymine, guanine, adenine, and cytosine

D) thymine, guanine, adenine, and uracil

Question 41

How does RNA structurally and chemically differ from DNA?

A) In RNA, G pairs with T; in DNA, G pairs with C.

B) RNA is double-stranded; DNA is single-stranded.

C) RNA contains the base uracil; DNA contains thymine instead.

D) RNA is a polymer of amino acids; DNA is a polymer of nucleotides.

Question 42

What name is given to the physical coordinate location of a gene on a chromosome?

A) genotype

B) chromaddress

C) locus

D) allele

Question 43

The primary structure of a protein refers specifically to:

A) The sequence of peptide bonds in the chain

B) The sequence of amino acids in the polypeptide chain

C) The folding patterns of alpha helices

D) The combination of multiple subunits

Question 44

What name is given to the following synthesis reaction?

glycerol+3 fatty acids→triglyceride+3 water molecules\text{glycerol} + \text{3 fatty acids} \rightarrow \text{triglyceride} + \text{3 water molecules}

A) denaturation

B) dehydration reaction

C) hydrogenation

D) hydrolysis

Question 45

Undifferentiated zygote cells eventually specialize into liver, muscle, or blood cells. What process is responsible for this?

A) carcinogenesis

B) regeneration

C) gene expression

D) cellular differentiation

Question 46

Proteins are polymers constructed from which monomers?

A) fatty acids

B) nucleotides

C) hydrocarbons

D) amino acids

Question 47

Homologous chromosomes:

A) carry the same versions of all alleles

B) carry genes controlling the same inherited characteristics

C) include only the autosomes, never sex chromosomes

D) are a set of chromosomes that the cell received from only one parent

Question 48

The biological conversion of a specific sequence of nucleotides in DNA into an mRNA transcript is called:

A) translation

B) transamidation

C) decoding

D) transcription

Question 49

Which of these is the strongest molecular interaction holding together adjacent nucleotides within a single strand of DNA?

A) covalent bonds between complementary bases

B) hydrogen bonds between adjacent nucleotides

C) hydrogen bonds between complementary bases

D) covalent bonds between adjacent nucleotides (the sugar-phosphate backbone)

Question 50

A protein's structural and functional capabilities are directly dependent on its overall:

A) weight

B) size

C) pH

D) shape

Question 51

What is the upstream, first level of control of eukaryotic gene expression?

A) DNA packing and unpacking (chromatin remodeling)

B) the binding of transcription factors to enhancer sequences

C) attachment of RNA polymerase directly to the promoter

D) alternative RNA splicing

Question 52

The primary structure of an amino acid chain is locked together by what type of strong bonds?

A) Peptide bonds

/B) Hydrophobic forces

C) Hydrogen bonds

D) Phosphodiester links

Question 53

A visual chart tracking an entire human chromosomal layout shows three full copies of chromosome 21. What condition is identified?

A) Trisomy 21 (Down syndrome)

B) Turner syndrome

C) Klinefelter syndrome

D) Monosomy X

Question 54

A specific sequence of DNA that directly codes for the amino acid sequence of a polypeptide is a:

A) gene

B) protein

C) enzyme

D) histone

Question 55

What name is given to a mutated gene that directly causes overactive cell division and cancer?

A) oncogene

/B) homeotic gene

C) pathogene

D) suppressor gene

Question 56

How can a single eukaryotic pre-mRNA transcript be processed to yield completely different polypeptides?

A) Two separate genes join to make one transcript.

B) Alternative RNA splicing removes different combinations of introns and exons.

C) The length of its poly-A tail alters the structural code.

D) Ribosomes read the code backward.

Question 57

The mRNA transcript is read and processed by a ribosome to assemble a protein in a process called:

A) transformation

B) decoding

C) translation

D) transcription


🔬 Section 6: Microscopy & Bacterial Expression

Question 58

An advantage of using bacterial host cells to express recombinant human proteins is that:

A) they perform complex mammalian post-translational modifications

B) they fold all human proteins perfectly every time

C) they are well-characterized, highly understood biological systems

D) they are structurally identical to human cells

Question 59

If you view a specimen through a compound microscope with an ocular lens of 10X and an objective lens of 40X, what is your total magnification?

A) 4X

B) 400X

C) 10X

D) 50X

Question 60

A disadvantage of using bacterial cells to express human proteins is that:

A) they do not possess the machinery to correctly fold all complex human proteins

B) they grow too quickly to harvest

C) they are incredibly difficult to maintain in standard cultures

D) their growth media is unsustainably expensive

Question 61

Aseptic technique is vital in biotechnology labs because:

A) it facilitates the chemical ligation of DNA fragments

B) it speeds up the incubation time of cells

C) it maintains a clean workspace and keeps unwanted environmental bacteria out of your experiment

D) it increases the resolution of compound microscopes

Question 62

The presence of peptidoglycan in the cell wall of an unknown bacterial strain is traditionally verified using which laboratory protocol?

A) An ELISA assay

B) A Gram stain

C) A Southern blot

D) Gel electrophoresis

Question 63

Which of the following descriptions accurately characterizes a compound microscope? (Select ALL that apply)

A) It can have multiple selectable magnification levels

B) It has a condenser with an iris diaphragm to adjust light intensity

C) It routes light sequentially through two or more lenses (ocular and objective)

D) It features a mechanical stage to hold specimens securely


🧬 Section 7: Gel Electrophoresis & Plasmids

Question 64

Which of the following statements about agarose gel electrophoresis are true? (Select ALL that apply)

A) The gel matrix contains microscopic pores that act as a sieve to sort fragments by size

B) DNA fragments move toward the positive electrode (red) because DNA carries a net negative charge

C) Smaller DNA fragments move faster and travel farther through the gel than larger fragments

D) DNA is loaded into wells located near the negative electrode (black)

Question 65

During gel electrophoresis, a restriction digest leaves you with four DNA fragments: 800 bp, 550 bp, 2,200 bp, and 1,230 bp. Which statement regarding their migration is INCORRECT?

A) The 2,200 bp piece will remain closest to the loading well.

B) The 550 bp piece will travel the fastest and migrate the farthest.

C) The 800 bp piece will migrate farther than the 550 bp piece.

D) The expected order from well to the bottom is 2,200 bp →\rightarrow 1,230 bp →\rightarrow 800 bp →\rightarrow 550 bp.

Question 66

The net chemical charge of a DNA molecule is negative due to which component?

A) Deoxyribose sugars

B) Nitrogenous bases (Adenine/Thymine)

C) Phosphate groups

D) Hydrogen bonds

Question 67

Gel electrophoresis is utilized during genetic engineering workflows to:

A) Pipette microscopic quantities of solutions accurately

B) Chemically paste two distinct strands of DNA together

C) Verify the exact size of a DNA fragment before inserting it into a vector plasmid

D) Directly catalyze transcription inside live cells


✂ Section 8: Restriction Enzymes & Recombinant Vectors

Question 68

A restriction fragment with an overhanging sticky end reading -ATTCG will seamlessly bind with which of the following sticky configurations?

A) CGGAT-

B) TAAGC-

C) ATTGC-

D) GCCTA-

Question 69

What is the defining characteristic of "sticky ends" produced by restriction enzymes?

A) Poly-A tail caps on eukaryotic mRNA transcripts

B) Single-stranded overhanging ends of double-stranded DNA fragments capable of H-bonding to complements

C) The centromere binding region of human chromosomes

D) Chemical coatings that prevent nucleases from breaking DNA down

Question 70

An EcoRI restriction digest is performed on a linear piece of DNA that possesses exactly one target restriction site. How many fragments will remain after the enzyme finishes cutting?

A) 1

/B) 2

C) 3

D) 4

Question 71

What is the best scientific definition for recombinant DNA?

A) DNA that has been mutated by ultraviolet radiation exposure

B) DNA that includes sequences combined from two completely different biological sources

C) Single-stranded viral RNA converted into a double helix structure

D) Any plasmid found naturally inside an environmental bacterium


🧫 Section 9: Bacterial Transformation

Question 72

During the heat shock step of a bacterial transformation protocol, competent E. coli cells are rapidly shifted to what temperature to prompt plasmid uptake?

A) 37°C

B) 55°C

C) 42°C

D) 95°C

Question 73

You are tracking a transformation experiment using the pARA-R plasmid (containing ampR and the mRFP red fluorescent gene under the control of the pBAD arabinose promoter). On which plate will you observe pink/red colonies?

A) LB only plate

B) LB/Amp plate

/C) LB/Amp/Ara plate

D) LB/Amp plate without plasmid

Question 74

Why is the chemical compound CaCl2CaCl_2 (calcium chloride) utilized when preparing cells for transformation?

A) It acts as a nutritional source to catalyze rapid cellular division

B) It neutralizes charges to render the bacterial cell membranes competent to accept foreign DNA vectors

C) It actively destroys competing non-transformed cells

D) It serves as a color indicator for gene expression

Question 75

What is the purpose of adding ampicillin to agar selection plates in transformation protocols?

A) It selectively kills non-transformed bacteria, leaving only cells that successfully incorporated the plasmid containing the ampR gene to grow.

B) It acts as a transcriptional co-activator to turn on the fluorescent protein gene.

C) It stabilizes structural cell walls during hot incubation phases.

D) It prevents chemical oxidation of the nutrient agar broth.


🧪 Section 10: PCR & ELISA Assays

Question 76

During the denaturation stage of a Polymerase Chain Reaction (PCR) run, high heat (typically 95°C) is applied to achieve what structural goal?

A) To link complementary primers onto target sequences

B) To activate the Taq polymerase synthesis sequence

C) To break the weak hydrogen bonds keeping the two template DNA strands joined together

D) To permanently destroy any contaminating nucleases present

Question 77

Milk or BSA (bovine serum albumin) is used in some ELISAs as a blocking agent to prevent non-specific binding of antigens and antibodies to the bottom of the microtiter well.

A) True

B) False

Question 78

How does a chromogenic substrate indicate a positive result during an ELISA assay?

A) It causes the liquid inside the well to form a thick precipitate gel layer.

B) It begins as a completely clear liquid and changes color in the presence of the antibody-bound conjugate enzyme.

C) It emits high-intensity radioactive pulses read via a Geiger counter.

D) It triggers rapid bacterial colony formation along the well bottom surface.