Comprehensive Study Guide on Personal Care Skills and Resident Transfers
Admission, Discharge, Transfer, and Residents' Rights
Transition and Relocation Dynamics:
- Moving always requires significant adaptation. As a person ages, moving can be particularly difficult, especially when illness or underlying health problems are present.
- Nursing Assistants (NAs) play a critical role in facilitating a successful transition by providing emotional support, showing kindness and compassion, and helping residents feel comfortable and welcome in their new environment.
- Admission represents the initial encounter between staff and a new resident. Because change is inherently difficult, the NA must strive to make a positive first impression and clearly communicate what the resident can expect during their stay.
- Long-term care facilities serve as the resident's actual home; staff must make every effort to ensure the environment is welcoming and comfortable.
LGBTQ Residents' Rights and Considerations:
- Transitioning into a long-term care facility can be especially difficult for LGBTQ residents due to fears of receiving sub-standard care or concerns that their partner will not be treated with the same respect and dignity accorded to heterosexual spouses/partners.
- NAs must maintain strict non-judgmental professionalism; every resident deserves compassionate, professional, and courteous care regardless of sexual orientation or gender identity.
Documentation Principles:
- NAs must document all provided care using facility guidelines immediately following any procedure.
- Legally, if care is not documented, it did not happen.
Principles of Positioning, Logrolling, and Dangling
Logrolling Principles and Indications:
- Definition: Logrolling refers to moving a resident as a single unit without disturbing the alignment of the body.
- Alignment Requirement: The head, back, and legs must be kept in a straight line at all times.
- Clinical Indications: Logrolling is required for residents with neck or back problems, spinal cord injuries, or those recovering from back or hip surgeries.
- Safety Standards: Logrolling must be performed by at least two people working together, utilizing a draw sheet or assistive device to maintain continuous bodily alignment.
Procedure: Logrolling a Resident:
- Identify self by name and identify the resident by name according to facility policy (respects resident rights and ensures correct identification).
- Wash hands (provides infection prevention).
- Explain the procedure clearly, slowly, and directly, maintaining face-to-face contact whenever possible (promotes understanding and independence).
- Provide privacy using a curtain, screen, or door (maintains dignity and privacy rights).
- Adjust the bed to a safe working height (usually waist high) and lock the bed wheels (prevents injury to staff and resident).
- Lower the head of the bed until it is completely flat (allows resident movement without working against gravity).
- Position both caregivers on the same side of the bed: one standing at the resident's head and shoulders, and the second standing near the resident's midsection.
- Place a pillow under the resident's head to support the neck during the turn.
- Cross the resident's arms across their chest and place a pillow between their knees.
- Stand with feet shoulder-width apart, bend knees, and maintain a straight back (promotes proper body mechanics and reduces injury risk).
- Both caregivers firmly grasp the draw sheet on the far side of the resident.
- On the count of , gently roll the resident toward both caregivers as a single unit, using body weight to block the resident and prevent them from rolling off the bed.
- Reposition the resident comfortably, ensuring alignment. Unroll the draw sheet and leave it in place for the next repositioning.
- Lower the bed back to its lowest position (ensures resident safety).
- Place the call light within the resident's reach (allows communication with staff).
- Wash hands.
- Report any observed changes in the resident to the nurse.
- Document the procedure using facility guidelines.
Dangling Principles and Indications:
- Definition: Dangling means assisting a resident to sit up on the side of the bed with their legs hanging over the edge prior to standing.
- Physiological Purpose: Dangling helps the resident regain balance, allows blood pressure to stabilize, and prevents dizziness or light-headedness that could lead to fainting.
Procedure: Assisting a Resident to Sit Up on the Side of the Bed (Dangling):
- Identify self by name and identify the resident according to facility policy.
- Wash hands.
- Explain the procedure clearly, slowly, and directly with face-to-face contact.
- Provide privacy using a curtain, screen, or door.
- Adjust the bed to its lowest position and lock the bed wheels (allows feet to touch the floor when sitting and reduces fall injury risks).
- Raise the head of the bed to bring the resident into a sitting position (allows movement without working against gravity).
- Stand with feet shoulder-width apart, bend knees, and keep back straight.
- Place one arm under the resident's shoulder blades and the other arm under the resident's thighs. Warning: Never place an arm under the resident's neck, as this can cause injury.
- On the count of , slowly swing and move the resident into a sitting position with legs dangling over the side of the bed (the downward weight of the legs helps leverage the body upward).
- Instruct the resident to sit up straight and grip the edge of the mattress with both hands. Assist the resident in putting on nonskid footwear (prevents sliding and protects feet from floor contamination).
- Allow the resident to dangle for the exact duration ordered on the care plan. Follow care plan instructions on whether dangling precedes walking/transfer or leads back to lying down. Never leave a dangling resident alone.
- Assessment Protocol: If dizziness persists for more than , assist the resident back into bed immediately. Measure pulse and respiration rates and report them to the nurse.
- To return resident to bed: Remove footwear, place one arm around the resident's shoulders and the other under their knees, and slowly swing legs back onto the bed.
- Return bed to lowest position and remove privacy measures.
- Place the call light within reach.
- Wash hands.
- Report any changes in resident to the nurse.
- Document the procedure using facility guidelines.
Transfer Safety, Ergonomics, and Lift Policies
Transfer Concepts and Ergonomic Mandates:
- Transfer Definition: Moving a resident from one location or surface to another (e.g., bed to wheelchair, wheelchair to shower, or chair to toilet).
- OSHA Standards: The Occupational Safety and Health Administration (OSHA) provides guidelines stating that manual lifting and transferring of residents should be reduced and eliminated whenever possible due to high injury risks.
- Ergonomics Definition: Ergonomics is the science of designing equipment, work areas, and tasks to make them safer and tailored to fit worker abilities.
Facility Lift Policies:
- Facilities implement no-lift, zero-lift, or lift-free policies establishing strict boundaries for manual transfers.
- Variations: Some facility policies prohibit manual lifting entirely, mandating mechanical equipment for all movement. Increasing restrictions on manual lifting directly correlates with decreased staff and resident injuries.
Transfer Belts:
- Description: A safety device constructed of canvas or heavy-duty material, equipped with a buckle and sometimes handles, designed to assist weak, unsteady, or uncoordinated residents during transfers and ambulation.
- Application Guidelines: Fasten snugly around the resident's waist outside of clothing. Never place a transfer belt directly over bare skin.
- Grip Technique: Securely grasp the belt on both sides using an upward hand grip position.
- Contraindications: Do not use transfer belts on residents with fragile bones, active fractures, or recent specific surgeries.
Slide Boards (Transfer Boards):
- Purpose: Used to transfer residents who are unable to bear weight on their legs between two sitting surfaces (e.g., bed to wheelchair).
- Precautions: Never place a slide board against bare skin. Always verify that the resident's fingers are clear of the underside of the board before sliding.
Fall Prevention and Active Fall Response:
- Prevention Protocols: Ensure proper alignment, utilize pressure-relief cushions, and reposition seated residents at least every .
- Managing an Active Fall During Transfer:
- Do NOT attempt to stop, reverse, or catch a falling resident. Trying to reverse a fall increases the severity of injuries to both staff and residents.
- Pull the resident's body close to yours to break the fall.
- Bend knees and lower the resident slowly to the floor, dropping to the floor alongside them.
- Post-Fall Management:
- Call for immediate help.
- Do NOT move or attempt to lift the resident off the floor after a fall.
- Stay with the resident continuously until help arrives; never leave a fallen resident alone.
Wheelchair Operation and Manual Transfer Procedures
Wheelchair Operation Guidelines:
- Brakes: Always engage wheel locks before transferring a resident into or out of a wheelchair. Disengage wheel locks only after the transfer is complete.
- Unfolding: Tilt the chair slightly to lift wheels on the opposite side, then press down on one or both seat rails until the frame opens fully and the seat is flat.
- Folding: Pull upward on the center edge of the seat canvas.
- Footrests:
- Swiveling: Press/pull the release lever and swing the footrest outward to the side.
- Removal: Swing footrest to the side position and lift straight off.
- Reattachment: Insert in side position, swing to front until locked.
- Height Adjustment: Support foot/leg, squeeze adjustment lever, and push down or pull up.
- Armrests:
- Removal: Release lock lever near armrest base and pull straight up from the center.
- Reattachment: Align and lower into place until locked.
- Weight-Bearing Mechanics: Residents must utilize their unaffected (stronger) side to support and lift their body during transfers. Leg braces or overhead trapezes are required if no leg weight-bearing is possible.
- Footwear Requirement: Verify the resident is wearing securely fastened, nonskid footwear prior to beginning any transfer.
Procedure: Transferring a Resident from Bed to Wheelchair:
- Equipment Needed: Wheelchair, transfer belt, nonskid footwear, robe or folded blanket.
- Identify self by name; identify resident according to facility policy.
- Wash hands.
- Explain procedure clearly, slowly, and directly, maintaining face-to-face contact.
- Provide privacy (curtain, screen, door) and inspect the room to ensure the transfer path is uncluttered and safe.
- Position wheelchair at the head of the bed facing the foot (or foot of bed facing head) so the wheelchair arm is nearly touching the bed. Place chair on resident's stronger (unaffected) side.
- Remove both wheelchair footrests near the bed.
- Lock wheelchair brakes.
- Raise head of bed, adjust bed height to its lowest position, and lock bed wheels.
- Assist resident into a sitting position with feet flat on the floor; allow resident to sit for a few minutes to adjust to the position change.
- Put nonskid footwear on the resident and fasten securely.
- Stand directly in front of resident with feet placed shoulder-width apart.
- Place transfer belt around resident's waist over clothing. Tighten buckle until snug, ensuring space to fit flat fingers/hand comfortably under belt. Verify no skin or skin folds (e.g., breasts) are pinched. Grasp belt on both sides using an upward hand position.
- Instruct resident on transfer steps: "Push against the bed with your hands when standing," "Take small steps toward the chair," and "Reach for the wheelchair armrest with your stronger hand."
- Brace the resident's lower legs by placing knees directly against resident's knees (or standing toe-to-toe). Bend knees and maintain a straight back.
- Count to to signal movement (allow resident to rock on counts if able). On , assist resident to stand using upward guidance on the transfer belt. If resident exhibits dizziness upon standing, assist back to sitting immediately, check ordered vital signs, and report to nurse.
- Direct resident to take small steps toward the chair while turning back toward it, or assist resident to pivot until the backs of their legs touch the wheelchair seat.
- Ask resident to place hands on wheelchair armrests. Assist resident to lower into chair once legs touch the seat frame.
- Reposition resident so hips touch the back of the wheelchair seat (utilizing full seat depth is safest).
- Attach footrests, place resident's feet on footrests, and verify proper body alignment. Gently remove transfer belt. Place a lap robe or folded blanket over lap/legs if appropriate.
- Remove privacy measures.
- Place call light within reach.
- Wash hands.
- Report any resident changes to the nurse.
- Document the procedure using facility guidelines.
Mechanical and Hydraulic Lift Transfers
Mechanical Lift Equipment Overview:
- Lift Types: Lifts may be hydraulic, power/electric, battery-operated, or standing lifts, used to transfer completely dependent residents or those able to bear partial weight.
- Training Requirement: NAs must complete mandatory special training before operating any mechanical lift. Operating untrained is strictly prohibited.
- Staffing Requirement: Mechanical lift transfers require a minimum of two staff members (NA and coworker).
Safety Guidelines for Mechanical Lifts:
- Keep wheelchair or destination chair close to the bed to minimize travel distance in the lift. Lock destination chair wheels.
- Inspect lift valves to ensure proper operational function before use.
- Select the exact sling design designated for the specific lift. Using an incorrect sling can result in severe injury or death.
- Inspect sling fabric and attachment straps for fraying, tears, or holes. Discontinue use immediately if damage is found.
- Expand base legs of the lift frame to the widest position before raising resident.
- Elevate resident only to the height required to clear the bed or chair surface (approximately above bed surface).
- Locate and understand the operation of emergency release features on battery-powered or electric lifts.
Procedure: Transferring a Resident Using a Mechanical Lift:
- Equipment Needed: Mechanical/hydraulic lift, correct sling, wheelchair or chair, coworker.
- Identify self by name; identify resident by name.
- Wash hands.
- Explain procedure clearly, slowly, directly with face-to-face contact.
- Provide privacy using curtain, screen, or door.
- Lock bed wheels.
- Position wheelchair next to bed and lock wheelchair brakes.
- Raise far side rail (if used). Assist resident to turn onto side toward raised rail. Return to working side. Position sling under resident with edge next to back (fanfold if necessary). Align bottom of sling even with resident's knees. Roll resident back to center of bed. Spread out fanfolded sling edge.
- Roll mechanical lift to bedside with base legs opened to widest setting. Drive base under bed frame.
- Position overhead bar directly over resident's chest.
- With resident lying supine, attach sling straps to overhead bar. Have coworker support resident's head, shoulders, and knees. Cross resident's arms across chest. Ensure S-hooks face AWAY from resident's body. Confirm all straps are smooth, straight, and properly latched.
- Following manufacturer guidelines, raise resident above bed surface. Pause briefly to allow resident to gain balance.
- Coworker supports and guides resident's body while NA rolls lift until resident is positioned directly over wheelchair seat.
- Slowly lower resident into chair. Gently press down on resident's knees during descent to assist body into a sitting (rather than reclining) posture.
- Unhook straps from overhead bar. Remove sling or leave in place per facility policy.
- Verify resident is seated comfortably and correctly with hips against back of seat. Remove privacy measures.
- Place call light within reach.
- Wash hands.
- Report changes in resident condition to nurse.
- Document procedure using facility guidelines.