Material Science: Introduction and Classification of Materials
Definition: Material Science is the branch of science that investigates the relationship existing between the structures of materials, their properties, and applications to various areas of science and engineering.
Classification of Materials: Materials are classified based on their physical and chemical properties.
Components and Interrelations: Using Aluminium Oxide (Al2O3) as an example to illustrate structural variations:
Single Crystal: Transparent.
Polycrystalline: Numerous and small single crystals connected.
Porous: Interconnected crystals with a large number of very small pore spaces.
Metals are polycrystalline bodies consisting of a great number of fine crystals differently oriented with respect to one another.
Pure metals usually have low strength and do not possess the required physiochemical and technological properties for specific industrial processes.
Alloys are produced by melting or sintering two or more metals, or metals and a non-metal, together.
Ceramic Materials: Non-metallic solids made of inorganic compounds such as oxides, silicides, etc.
New Ceramics: Possess exceptional characteristics used in aerospace, nuclear industries, electronic control devices, and computers.
Organic Materials: Derived directly from Carbon, usually chemically combined with Hydrogen, Oxygen, or other nonmetallic substances. Polymers are the primary focus of this group.
Electrical Classification:
Conductors.
Semiconductors.
Insulators (Dielectric).
Magnetic Materials: Ferromagnetic, paramagnetic, diamagnetic.
Advanced Materials: Used in high-technology applications (fiber-optic systems, VCRs, CDs, aircraft, spacecraft). They are typically traditional materials with enhanced properties or newly developed materials.
Biomaterials: Components applied in the human body to replace deceased or damaged body parts. Metals, ceramics, composites, and polymers can all serve as biomaterials.
Smart Materials: State-of-the-art materials able to detect environmental changes and respond. Components include sensors and actuators. Includes nanoengineered materials.
Properties of Materials:
Physical: Melting/freezing points, boiling points, density, linear coefficient of expansion, thermal conductivity, electrical resistivity.
Chemical: Corrosion resistance, chemical composition, acidity, or alkalinity.
Note: Properties of materials arise from their structure.
Material Selection Criteria: Mechanical strength, ductility, design, stability, availability, fabricability, corrosion resistance, and cost.
Atomic Structure and Bonding
Atom: The smallest component of an element having the chemical properties of that element.
Subatomic Particles:
Protons: Positively charged (+1). Mass ≈ 1.67×10−27kg.
Neutrons: Electrically neutral (0). Mass ≈ 1.67×10−27kg.
Electrons: Negatively charged (−1). Mass ≈ 9.11×10−31kg.
Neutral Atom: The charges of protons and electrons cancel out. Almost all mass is contained in the nucleus; electron mass is negligible.
Atomic Number (Z): Characterized by the number of protons in the nucleus. In a neutral atom, this equals the number of electrons.
Atomic Mass (A): The sum of the masses of protons and neutrons within the nucleus (A=Z+N).
Isotopes: Atoms of the same element with different numbers of neutrons (N), resulting in different atomic masses. They usually have similar chemical properties but varying physical properties (e.g., Chlorine-35 vs. Chlorine-37).
Atomic Models:
Thompson’s Plum Pudding Model.
Rutherford’s Nuclear Model.
Bohr Atomic Model: Electrons revolve in discrete, stationary orbitals (n=1,2,3,4,...) with quantized energy levels. Electrons can jump between levels by absorbing or emitting energy.
Wave-Mechanical Model: Electrons exhibit both wavelike and particulate properties. Position is defined by a probability cloud (orbital) rather than a fixed path.
Quantum Numbers:
Principal Quantum Number (n): Defines the shell (K,L,M,N,O), where n=1,2,3,4,5.... Related to the size and energy of the orbital.
Orbital/Azimuthal Quantum Number (l): Signifies the subshell (s,p,d,f) and shape. Restricted by the value of n.
Magnetic Quantum Number (ml): Determines the number of energy states for each subshell (s=1,p=3,d=5,f=7).
Spin Quantum Number (ms): Specifies the spin orientation of an electron (+1/2 or −1/2).
Electronic Configuration: The distribution of electrons in various subshells.
Valence Electrons: Electrons in the outermost shell. They determine chemical reactivity and atomic bonding.
Stable Configurations: Outermost shell is completely filled (usually 8 electrons, except Helium which has 2). Found in noble/inert gases (He, Ne, Ar, Kr).
Periodic Table Trends:
Ionization Energy (IE): Energy required to remove the most weakly bound electron. Increases left-to-right and bottom-to-top.
Electron Affinity (EA): Energy change when an atom accepts an electron. Increases left-to-right and bottom-to-top.
Atomic and Ionic Radii: Positive ions are smaller than neutral atoms; negative ions are larger. General increase in radius right-to-left and top-to-bottom.
Electronegativity: Tendency of an atom to attract electrons. Increases left-to-right and bottom-to-top.
Atomic Bonding:
Primary Bonds (Strong):
Ionic Bonding: Metal donates electrons to non-metal. High bond energy (450−1000kJ/mol), high melting point, high strength, hard, brittle, poor conductors (e.g., NaCl,MgO).
Covalent Bonding: Atoms with similar electronegativities share electrons to achieve stable (noble gas) configurations. Very strong/hard, high melting point, non-ductile, poor conductors (e.g., H2,CH4,Diamond).
Metallic Bonding: Array of positive ions surrounded by a "sea" of delocalized valence electrons. Electrons are free to move, accounting for conductivity.
Secondary Bonds (Weak): Van der Waals forces and Hydrogen bonding.
Crystal Structure
Crystalline Materials: Atoms are situated in a repetitive/periodic array over long atomic distances (long-range order). Examples: metals, diamond, table salt.
Amorphous (Non-crystalline) Solids: Lack a systematic, regular arrangement. Atoms have only short-range order. Examples: rubber, glass, gels.
Unit Cell: The smallest repeat entity representing the symmetry of the crystal structure. Defined by three translation vectors (a,b,c) and angles (α,β,γ).
Modulus of Elasticity (Young’s Modulus, E): Ratio of stress to strain in the elastic region, defined by Hooke’s Law: σ=Eϵ. Represents material stiffness.
Elastic vs. Plastic Deformation:
Elastic: Non-permanent; material returns to original shape upon load removal.
Plastic: Permanent; occurs beyond the Yield Point (Y).
Anelasticity: Time-dependent elastic recovery (prominent in polymers).
Tensile Properties:
Yield Strength: Stress at which noticeable plastic deformation begins (often measured at 0.2% offset).
Tensile Strength (TS): Maximum stress on the engineering stress-strain curve.
Ductility: Degree of plastic deformation at fracture. Measured by % Elongation (%EL) or % Reduction in Area (%RA).
Resilience: Ability to absorb energy in the elastic region (area under elastic portion of curve).
Toughness: Ability to absorb energy up to fracture (total area under stress-strain curve).
True Stress and Strain:
True Stress (\sigma_{true}): σ=AiF (based on instantaneous area).
True Strain (\epsilon_{true}): ϵ=ln(l0li).
Poisson’s Ratio (\mu): The ratio of lateral strain to linear (axial) strain (μ=−ϵzϵx). Typical values: 0.25 to 0.35.
Brinell: Pressing a 10-mm steel or carbide ball into the surface. BHN=πDb(Db−Db2−Di2)2F.
Rockwell: Uses various indenters (cone or ball) and applies a minor load followed by a major load (150kg). Hardness is based on the penetration depth difference.
Corrosion of Materials
Definition: Electrochemical attack usually starting at the surface of a metal.
Electrochemical Reactions:
Oxidation (Anodic): Metal atoms lose electrons (M→Mn++ne−).
Reduction (Cathodic): Chemical species gain electrons. In acids: 2H++2e−→H2.
Galvanic Couple: Two different metals electrically connected in an electrolyte. The more active metal (anode) corrodes, while the more inert metal (cathode) is protected.
Standard emf Series: Ranking of metals by their standard electrode potential (Vo).
More positive values (Gold, Platinum) are cathodic/inert.
More negative values (Sodium, Potassium, Magnesium, Zinc) are anodic/active.
Forms of Corrosion:
Uniform Attack: Even surface removal.
Galvanic: Selective attack of the anode in a couple.
Crevice: Occurs in localized stagnant areas (under gaskets/washers).
Pitting: Small, deep holes.
Intergranular: Selective attack along grain boundaries (often in welded stainless steel).
Selective Leaching: One element is removed from an alloy (e.g., dezincification of brass).
Erosion-Corrosion: Combined mechanical wear and chemical attack.
Stress-Corrosion: Cracking caused by combined tensile stress and corrosive environment.
Definition: Macromolecules consisting of many small monomer units linked in long chains.
Classification:
Thermoplastics: Soften and melt when heated; can be recycled/re-melted (PE,PP,PVC,Nylon).
Thermosets: Do not melt upon heating; they have strong cross-links that form a 3D network (Epoxies,Phenolics,Melamine). Typically stronger and stiffer than thermoplastics.
Elastomers: High elasticity; can be reversibly stretched. Long, lightly cross-linked molecules (NaturalRubber,Silicone,Neoprene).
Glass Transition Temperature (Tg): The temperature below which a polymer becomes brittle and glassy, and above which it becomes rubbery.
Vulcanization: Heating rubber with sulfur (5−30%S) to create sulfur cross-links between polyisoprene chains. Improves tensile strength, elasticity, and hardness.
Fabrication Methods:
Thermoforming: Shaping a flat thermoplastic sheet by heating and using vacuum, air pressure, or mechanical force.
Extrusion: Softened polymer is forced through a die to create long products of constant cross-section (pipes, rods).
Injection Molding: Molten polymer is injected under high pressure into a mold cavity using a reciprocating screw.
Blow Molding: Injecting air into a heated hollow thermoplastic tube (parison) to expand it against the walls of a mold (bottles, containers).