Geodesy MCQ
1. GPS Survey Methods
### a. Single Point Positioning vs. Relative Positioning
1. Single point positioning is also known as:
- a) Differential positioning
- b) Absolute positioning
- c) Relative positioning
- d) Baseline positioning
Answer: b) Absolute positioning
2. In single point positioning, the coordinates of the receiver are determined with respect to:
- a) A nearby known point
- b) The Earth's center
- c) Another GPS receiver
- d) A base station
Answer: b) The Earth's center
3. Relative positioning is also known as:
- a) Autonomous positioning
- b) Stand-alone positioning
- c) Base line determination
- d) Point positioning
Answer: c) Base line determination
4. The main advantage of relative positioning over single point positioning is:
- a) Lower cost
- b) Faster processing
- c) Higher accuracy due to cancellation of common errors
- d) No need for reference station
Answer: c) Higher accuracy due to cancellation of common errors
5. The equation P₅S₁ = sqrt((xS₁ - xr)² + (yS₁ - yr)² + (zS₁ - zr)²) + errors represents:
- a) Relative positioning
- b) Single point positioning
- c) Kinematic positioning
- d) Static positioning
Answer: b) Single point positioning
---
### b. Static vs. Kinematic Positioning
6. In static positioning, the receiver:
- a) Moves continuously
- b) Remains stationary
- c) Is mounted on a vehicle
- d) Only tracks one satellite
Answer: b) Remains stationary
7. Kinematic positioning is used for:
- a) Stationary points only
- b) Moving points
- c) Only base stations
- d) Only reference stations
Answer: b) Moving points
8. Static positioning requires:
- a) Only 1 satellite
- b) No data logging
- c) Continuous data logging over a period of time
- d) Only real-time processing
Answer: c) Continuous data logging over a period of time
9. Which type of positioning can be performed in real-time or post-mission?
- a) Static positioning only
- b) Kinematic positioning only
- c) Both static and kinematic positioning
- d) Neither static nor kinematic positioning
Answer: b) Kinematic positioning only
10. The accuracy of static positioning depends on all EXCEPT:
- a) Duration of observation
- b) Satellite geometry
- c) Distance between receivers
- d) Color of the receiver
Answer: d) Color of the receiver
---
### c. Real Time vs. Post Mission
11. In real-time processing, positioning results are available:
- a) After 24 hours
- b) After post-processing
- c) Instantly on site
- d) Only after downloading data
Answer: c) Instantly on site
12. Post-mission processing allows users to get sub-meter positioning up to:
- a) 10 km
- b) 50 km
- c) 100 km
- d) 300 km
Answer: d) 300 km
13. Real-time kinematic (RTK) positioning is based on:
- a) Code measurements only
- b) Phase measurements
- c) Pseudo-range only
- d) Almanac data
Answer: b) Phase measurements
14. RT-DGPS is based on:
- a) Phase measurements
- b) Code measurements
- c) Carrier phase only
- d) Ephemeris data
Answer: b) Code measurements
15. A data link is required in real-time positioning to:
- a) Download maps
- b) Transmit corrections from base to rover
- c) Upload satellite data
- d) Connect to the internet
Answer: b) Transmit corrections from base to rover
---
2. Practical GPS Survey Field Procedures
16. The main disadvantage of conventional GPS surveying is:
- a) Low accuracy
- b) Long time observation sessions
- c) High cost
- d) Complex equipment
Answer: b) Long time observation sessions
17. Modern GPS surveying has the advantage of:
- a) Lower capital costs
- b) High productivity
- c) No atmospheric disturbances
- d) No need for special hardware
Answer: b) High productivity
18. Absolute positioning uses:
- a) Two receivers
- b) A single passive receiver
- c) Three receivers
- d) A base station and rover
Answer: b) A single passive receiver
19. Standard Positioning Service (SPS) can achieve real-time positional accuracy of:
- a) 1 m
- b) 5 m
- c) 25 m
- d) 100 m
Answer: c) 25 m
20. Precise Positioning Service (PPS) can achieve point positional accuracy of:
- a) 25-30 m
- b) 10-12 m
- c) 1-5 m
- d) Sub-centimeter
Answer: b) 10-12 m
21. To determine a 3D GPS position, minimum how many pseudo-range observations are needed?
- a) 2
- b) 3
- c) 4
- d) 6
Answer: c) 4
22. Dilution of Precision (DOP) describes:
- a) Signal strength
- b) Geometrical magnification of uncertainty
- c) Clock error
- d) Atmospheric delay
Answer: b) Geometrical magnification of uncertainty
23. In relative positioning, the reference receiver:
- a) Moves with the rover
- b) Has unknown coordinates
- c) Has known coordinates and remains stationary
- d) Is optional
Answer: c) Has known coordinates and remains stationary
24. Static positioning accuracy is typically:
- a) 5 mm + 1 ppm
- b) 10-30 cm
- c) 1-5 m
- d) 25 m
Answer: a) 5 mm + 1 ppm
25. Stop-and-go GPS surveying is used where:
- a) Only one point needs to be measured
- b) Large number of unknown points within 10-15 km of known point
- c) No base station is available
- d) Only kinematic data is needed
Answer: b) Large number of unknown points within 10-15 km of known point
---
3. Introduction to GLONASS and GALILEO System
26. GLONASS is operated by:
- a) U.S. government
- b) Russian government
- c) European Union
- d) Indian government
Answer: b) Russian government
27. The first GLONASS satellite was launched in:
- a) 1976
- b) 1982
- c) 1993
- d) 2000
Answer: b) 1982
28. GLONASS constellation consists of how many satellites in nominal constellation?
- a) 21
- b) 24
- c) 27
- d) 31
Answer: b) 24
29. GLONASS satellites are arranged in how many orbital planes?
- a) 3
- b) 4
- c) 6
- d) 8
Answer: a) 3
30. The inclination of GLONASS orbits is:
- a) 55°
- b) 63°
- c) 64.8°
- d) 45°
Answer: c) 64.8°
31. GLONASS uses which multiple access technique?
- a) CDMA
- b) FDMA
- c) TDMA
- d) SDMA
Answer: b) FDMA
32. The orbital altitude of GLONASS satellites is:
- a) 20,200 km
- b) 19,100 km
- c) 26,560 km
- d) 35,786 km
Answer: b) 19,100 km
33. Galileo is a project developed by:
- a) Russia
- b) USA
- c) European Union and ESA
- d) China
Answer: c) European Union and ESA
34. The cost of Galileo project is approximately:
- a) €5 billion
- b) €10 billion
- c) €20 billion
- d) €50 billion
Answer: c) €20 billion
35. GLONASS-M spacecraft has a design life of:
- a) 3 years
- b) 7 years
- c) 10 years
- d) 15 years
Answer: b) 7 years
---
4. Introduction and Overview of GPS
### a. GPS Segments
36. GPS consists of how many segments?
- a) 2
- b) 3
- c) 4
- d) 5
Answer: b) 3
37. The three segments of GPS are:
- a) Space, Control, User
- b) Satellite, Receiver, Antenna
- c) Military, Civilian, Commercial
- d) L1, L2, L5
Answer: a) Space, Control, User
38. The Master Control Station of GPS is located at:
- a) Houston, Texas
- b) Colorado Springs, Colorado
- c) Cape Canaveral, Florida
- d) Vandenberg, California
Answer: b) Colorado Springs, Colorado
39. GPS user equipment varies in price from approximately:
- a) $50 to $10,000
- b) $135 to $30,000
- c) $500 to $50,000
- d) $1000 to $100,000
Answer: b) $135 to $30,000
---
### b. GPS Satellite Constellation
40. The nominal GPS constellation consists of how many operational satellites?
- a) 21
- b) 24
- c) 27
- d) 31
Answer: b) 24
41. GPS satellites are arranged in how many orbital planes?
- a) 3
- b) 4
- c) 6
- d) 8
Answer: c) 6
42. The inclination of GPS orbits is approximately:
- a) 45°
- b) 55°
- c) 63°
- d) 64.8°
Answer: b) 55°
43. GPS satellites orbit at an altitude of approximately:
- a) 19,100 km
- b) 20,200 km
- c) 26,560 km
- d) 35,786 km
Answer: b) 20,200 km
44. The orbital period of GPS satellites is approximately:
- a) 6 hours
- b) 12 sidereal hours
- c) 24 hours
- d) 11 hours 15 minutes
Answer: b) 12 sidereal hours
45. GPS achieved Full Operational Capability (FOC) on:
- a) December 8, 1993
- b) July 17, 1995
- c) February 22, 1978
- d) November 18, 1995
Answer: b) July 17, 1995
---
### c. GPS Control Sites
46. How many monitor stations are there in the GPS control segment?
- a) 3
- b) 4
- c) 5
- d) 6
Answer: c) 5
47. Which of the following is NOT a GPS monitor station location?
- a) Hawaii
- b) Kwajalein
- c) Tokyo
- d) Diego Garcia
Answer: c) Tokyo
48. The master control station uploads data to GPS satellites through:
- a) L-band link
- b) S-band link
- c) X-band link
- d) Ku-band link
Answer: b) S-band link
49. Ground antennas for uploading information to GPS satellites are located at:
- a) Colorado Springs, Hawaii, Kwajalein
- b) Kwajalein, Diego Garcia, Ascension Island
- c) Hawaii, Diego Garcia, Colorado Springs
- d) Ascension Island, Hawaii, Kwajalein
Answer: b) Kwajalein, Diego Garcia, Ascension Island
---
### d. GPS Services and Uses
50. The two levels of GPS positioning services are:
- a) SPS and PPS
- b) L1 and L2
- c) C/A and P-code
- d) SA and AS
Answer: a) SPS and PPS
51. SPS uses which code?
- a) P-code
- b) Y-code
- c) C/A-code
- d) M-code
Answer: c) C/A-code
52. PPS is available to:
- a) All users worldwide
- b) Authorized users only
- c) Civilian users only
- d) Commercial users only
Answer: b) Authorized users only
53. Selective Availability (SA) was turned off in:
- a) 1995
- b) 1998
- c) May 2000
- d) 2005
Answer: c) May 2000
54. The L1 frequency is:
- a) 1227 MHz
- b) 1575.42 MHz
- c) 1176.45 MHz
- d) 1602 MHz
Answer: b) 1575.42 MHz
55. The L2 frequency is:
- a) 1227.6 MHz
- b) 1575.42 MHz
- c) 1176.45 MHz
- d) 1245 MHz
Answer: a) 1227.6 MHz
56. The L5 frequency is:
- a) 1227.6 MHz
- b) 1575.42 MHz
- c) 1176.45 MHz
- d) 1602 MHz
Answer: c) 1176.45 MHz
---
5. Details of GPS Segments
### a. Space Segment
57. The first GPS satellite was launched in:
- a) 1976
- b) 1978
- c) 1982
- d) 1989
Answer: b) 1978
58. GPS satellites use solar panels and which type of batteries?
- a) Lithium-ion
- b) NiCad
- c) Lead-acid
- d) Alkaline
Answer: b) NiCad
59. The fundamental frequency of GPS atomic clocks is:
- a) 1.023 MHz
- b) 10.23 MHz
- c) 50 MHz
- d) 1575.42 MHz
Answer: b) 10.23 MHz
60. Each GPS satellite carries how many atomic clocks?
- a) 1
- b) 2
- c) 3
- d) 4
Answer: d) 4
61. The minimum elevation angle for GPS satellite visibility is typically:
- a) 5°
- b) 10°
- c) 15°
- d) 20°
Answer: c) 15°
62. Block I GPS satellites had an inclination of:
- a) 55°
- b) 63°
- c) 64.8°
- d) 45°
Answer: b) 63°
63. Block II/IIA satellites can function without ground support for:
- a) 14 days
- b) 30 days
- c) 180 days
- d) 210 days
Answer: c) 180 days
64. Block IIR satellites have autonomous navigation capability for at least:
- a) 14 days
- b) 30 days
- c) 180 days
- d) 210 days
Answer: c) 180 days
---
### b. Control Segment
65. The main function of Master Control Station is to:
- a) Track user positions
- b) Upload ephemeris and clock data to satellites
- c) Manufacture GPS receivers
- d) Provide weather data
Answer: b) Upload ephemeris and clock data to satellites
66. GPS control segment monitors and predicts satellite orbits for the next:
- a) 6 hours
- b) 12 hours
- c) 24 hours
- d) 48 hours
Answer: c) 24 hours
67. The monitor stations are located approximately on:
- a) The poles
- b) The equator
- c) Mid-latitudes
- d) Random locations
Answer: b) The equator
---
### c. User Segment
68. The user segment comprises of:
- a) GPS satellites
- b) Control stations
- c) GPS receivers and users
- d) Ground antennas
Answer: c) GPS receivers and users
69. Most civilian uses of GPS fall into which categories?
- a) Navigation, surveying, mapping, timing
- b) Military, civilian, commercial, scientific
- c) L1, L2, L5, C/A
- d) Static, kinematic, real-time, post-mission
Answer: a) Navigation, surveying, mapping, timing
70. GPS receivers convert signals from satellites into:
- a) Position, velocity, and time estimates
- b) Only position
- c) Only time
- d) Only velocity
Answer: a) Position, velocity, and time estimates
---
6. GPS Receivers
### a. Types of GPS Receivers
71. GPS receivers classified on the basis of features include all EXCEPT:
- a) Not-self-contained receivers
- b) Self-contained receivers
- c) Sophisticated receivers
- d) Dual-frequency receivers
Answer: d) Dual-frequency receivers
72. "GPS mice" are also known as:
- a) Self-contained receivers
- b) Not-self-contained receivers
- c) Sophisticated receivers
- d) Dual-frequency receivers
Answer: b) Not-self-contained receivers
73. C/A Code receivers have accuracy of:
- a) 1-5 m
- b) 10-30 cm
- c) Sub-centimeter
- d) 25 m
Answer: a) 1-5 m
74. Carrier Phase receivers provide accuracy of:
- a) 1-5 m
- b) 10-30 cm
- c) Sub-centimeter
- d) 25 m
Answer: b) 10-30 cm
75. Dual-Frequency receivers provide accuracy of:
- a) 1-5 m
- b) 10-30 cm
- c) Sub-centimeter
- d) 25 m
Answer: c) Sub-centimeter
76. Carrier Phase receivers require occupation time of about:
- a) 5 seconds
- b) 1 minute
- c) 5 minutes
- d) 30 minutes
Answer: c) 5 minutes
---
### b. Structure of GPS Receivers
77. A GPS antenna is designed to receive signals from satellites above:
- a) 0° elevation
- b) 5° elevation
- c) 10° elevation
- d) 15° elevation
Answer: b) 5° elevation
78. The L1 frequency is:
- a) 1227.6 MHz
- b) 1575.42 MHz
- c) 1176.45 MHz
- d) 1602 MHz
Answer: b) 1575.42 MHz
79. The L2 frequency is:
- a) 1227.6 MHz
- b) 1575.42 MHz
- c) 1176.45 MHz
- d) 1245 MHz
Answer: a) 1227.6 MHz
80. In I-Q down conversion, the Nyquist sampling is:
- a) fs = 2Δf
- b) fs = Δf
- c) fs = 0.5Δf
- d) fs = 1.25Δf
Answer: b) fs = Δf
81. A filter with 2 MHz bandwidth at 1575.42 MHz is considered:
- a) Low Q
- b) High Q
- c) Medium Q
- d) Zero Q
Answer: b) High Q
---
7. Principles of the Global Positioning System
### a. Specifics of GPS Signals
82. The C/A code is how many bits long?
- a) 511 bits
- b) 1023 bits
- c) 2046 bits
- d) 10230 bits
Answer: b) 1023 bits
83. The P-code is how long?
- a) 1 week
- b) 37 weeks
- c) 1 year
- d) 10 years
Answer: b) 37 weeks
84. The data message is transmitted at a rate of:
- a) 50 bits/second
- b) 100 bits/second
- c) 500 bits/second
- d) 1000 bits/second
Answer: a) 50 bits/second
85. The fundamental frequency of GPS is:
- a) 1.023 MHz
- b) 10.23 MHz
- c) 50 MHz
- d) 1575.42 MHz
Answer: b) 10.23 MHz
86. The C/A code rate is:
- a) 1.023 MHz
- b) 10.23 MHz
- c) 50 MHz
- d) 1575.42 MHz
Answer: a) 1.023 MHz
87. The P-code rate is:
- a) 1.023 MHz
- b) 10.23 MHz
- c) 50 MHz
- d) 1575.42 MHz
Answer: b) 10.23 MHz
### b. Multiple Modulations on Same Carrier Signal
88. On the L1 signal, the C/A code and P(Y) code are:
- a) In phase
- b) 90° out of phase
- c) 180° out of phase
- d) 45° out of phase
Answer: b) 90° out of phase
89. The P-code is written with what percentage of power?
- a) 25%
- b) 50%
- c) 75%
- d) 100%
Answer: b) 50%
90. Tracking GPS at L1 with only C/A code known is possible because:
- a) P-code is encrypted
- b) P-code has 50% power and is out of phase
- c) C/A code is stronger
- d) L1 has only C/A code
Answer: b) P-code has 50% power and is out of phase
---
### c. Structure of Signals
91. The GPS signal consists of:
- a) Two carriers, two codes, and navigation message
- b) One carrier, one code, and navigation message
- c) Three carriers and three codes
- d) Only carrier waves
Answer: a) Two carriers, two codes, and navigation message
92. The navigation message contains:
- a) Only satellite coordinates
- b) Satellite coordinates as a function of time
- c) Only clock data
- d) Only almanac
Answer: b) Satellite coordinates as a function of time
93. The data message is transmitted in how many frames?
- a) 3
- b) 5
- c) 10
- d) 25
Answer: b) 5
94. Each frame of the data message contains how many 30-bit words?
- a) 5
- b) 10
- c) 15
- d) 20
Answer: b) 10
95. Complete almanac takes how long to receive?
- a) 30 seconds
- b) 6 minutes
- c) 12.5 minutes
- d) 30 minutes
Answer: c) 12.5 minutes
---
### d. GPS Receiver Operation and Satellite Acquisition
96. Hot start of a GPS receiver takes approximately:
- a) A few seconds
- b) A few minutes
- c) 30 minutes
- d) 1 hour
Answer: a) A few seconds
97. Cold start of a GPS receiver can take:
- a) A few seconds
- b) A few minutes
- c) Tens of minutes to half an hour
- d) 1 hour
Answer: c) Tens of minutes to half an hour
98. The C/A code repeats every:
- a) 1 microsecond
- b) 1 millisecond
- c) 1 second
- d) 1 minute
Answer: b) 1 millisecond
99. In codeless tracking, the first method involved:
- a) Squaring the L2 signal
- b) Cross-correlation of L1 and L2
- c) Using P-code directly
- d) Using C/A code on L2
Answer: a) Squaring the L2 signal
100. The L1 beam extends to approximately what height above Earth's surface?
- a) 2000 km
- b) 4000 km
- c) 6000 km
- d) 8000 km
Answer: b) 4000 km
101. Modern GPS receivers typically have how many parallel tracking channels?
- a) 1
- b) 4
- c) 12
- d) 24
Answer: c) 12
102. The main beam half width at L1 is:
- a) 15.3°
- b) 21.3°
- c) 23.4°
- d) 30°
Answer: b) 21.3°
103. The main beam half width at L2 is:
- a) 15.3°
- b) 21.3°
- c) 23.4°
- d) 30°
Answer: c) 23.4°
104. To resolve the millisecond ambiguity in GPS signal acquisition, the receiver must:
- a) Use a more accurate clock
- b) Decode the data message
- c) Track more satellites
- d) Increase signal strength
Answer: b) Decode the data message
105. The first Block IIR-M satellite was launched on:
- a) 2003-09-30
- b) 2005-09-30
- c) 2009-03-24
- d) 2011-07-16
Answer: b) 2005-09-30