Comprehensive Study Notes on Metals and Non-Metals

Physical Properties of Metals and Non-Metals

Physical Properties of Metals

  • Metallic Lustre: Metals, in their pure state, possess a shining surface. Cleaning tarnished surfaces with sand paper reveals their bright metallic lustre.

  • Hardness: Metals are generally hard, although the degree of hardness varies significantly from metal to metal.

    • Exceptions: Alkali metals such as lithium (LiLi), sodium (NaNa), and potassium (KK) are soft enough to be sliced easily with a knife. They possess low densities and low melting points.

    • Caution with Sodium: Always handle sodium metal with extreme care. Dry sodium by pressing it between the folds of a filter paper before placing it on a watch-glass to cut with a knife.

  • Malleability: The property that allows metals to be hammered or beaten into thin sheets without fracturing.

    • Gold (AuAu) and silver (AgAg) represent the most malleable metals known.

    • Other malleable metals include iron (FeFe), zinc (ZnZn), lead (PbPb), and copper (CuCu).

  • Ductility: The ability of metals to be drawn into thin, elongated wires.

    • Gold (AuAu) is the most ductile metal. A wire of approximately 2 km2\,km in length can be drawn from just 1 g1\,g of gold.

    • Everyday electrical wiring utilizes ductile metals such as copper (CuCu) and aluminium (AlAl).

  • Thermal Conductivity and Melting Points:

    • Metals are effective conductors of heat and possess elevated melting points.

    • Demonstration: Clamping an aluminium or copper wire on a stand, attaching a pin to its free end using wax, and heating near the clamped region with a burner causes the wax to melt and the pin to drop, while the metal wire itself remains solid.

Metals are good conductors of heat
  • Best Conductors of Heat: Silver (AgAg) and copper (CuCu).

  • Poor Conductors of Heat: Lead (PbPb) and mercury (HgHg).

    • Electrical Conductivity:

  • Metals conduct electric current efficiently.

  • Demonstration: Inserting a metal sample between test terminals AA and BB in an electric circuit containing a battery, bulb, and switch causes the lamp to illuminate.

Metals are good conductors of electricity
  • Household electrical wires are coated with polyvinylchloride (PVCPVC) or rubber-like materials to prevent electric shocks.

    • Sonority:

  • Metals that produce a distinct ringing sound when striking a hard surface are defined as sonorous. Consequently, school bells and musical strings are manufactured from metals.

Physical Properties of Non-Metals

  • Non-metals exist in significantly smaller numbers compared to metals.

  • Examples include carbon (CC), sulphur (SS), iodine (I2I_2), oxygen (O2O_2), and hydrogen (H2H_2).

  • Physical States: Non-metals occur predominantly as solids or gases at room temperature, with the exception of bromine (Br2Br_2), which is a liquid.

  • Non-metals generally lack metallic lustre, malleability, ductility, high melting points, and sonority, and act as electrical and thermal insulators.

Exceptions in Physical Properties

Elements cannot be classified into metals and non-metals based solely on physical properties due to the following notable exceptions:

  • Room Temperature State: All metals except mercury (HgHg) exist as solids at room temperature. Mercury is a liquid metal.

  • Melting Points: Although metals typically have high melting points, gallium (GaGa) and caesium (CsCs) have low melting points and will melt when held on a human palm.

  • Lustre: Non-metals are non-lustrous, but iodine (I2I_2) is an exception as a lustrous non-metal.

  • Allotropes of Carbon: Carbon (CC) exists in distinct structural forms called allotropes:

    • Diamond: An allotrope of carbon that is the hardest naturally occurring substance, characterized by extremely high melting and boiling points.

    • Graphite: An allotrope of carbon that conducts electricity efficiently.

  • Density and Hardness of Alkali Metals: Lithium (LiLi), sodium (NaNa), and potassium (KK) are soft metals with low densities and low melting points that can be sliced easily using a knife.

Chemical Properties of Metals

Reaction of Metals with Oxygen (Burning in Air)

Most metals combine with atmospheric oxygen (O2O_2) upon heating to produce basic metal oxides: Metal+Oxygen→Metal Oxide\text{Metal} + \text{Oxygen} \rightarrow \text{Metal Oxide}

  • Copper: Copper does not burn when heated, but its reddish-brown surface becomes coated with a black layer of copper(II) oxide (CuOCuO):   2Cu+O2→2CuO2Cu + O_2 \rightarrow 2CuO

  • Aluminium: Reacts with oxygen to form aluminium oxide (Al2O3Al_2O_3):   4Al+3O2→2Al2O34Al + 3O_2 \rightarrow 2Al_2O_3

  • Nature of Metal Oxides:

    • Most metal oxides are basic in nature and insoluble in water.

    • Certain metal oxides dissolve in water to yield soluble alkalis. For instance, sodium oxide (Na2ONa_2O) and potassium oxide (K2OK_2O) dissolve as follows:     Na2O(s)+H2O(l)→2NaOH(aq)Na_2O(s) + H_2O(l) \rightarrow 2NaOH(aq)     K2O(s)+H2O(l)→2KOH(aq)K_2O(s) + H_2O(l) \rightarrow 2KOH(aq)

  • Amphoteric Oxides:

    • Metal oxides that display both acidic and basic characteristics by reacting with both acids and bases to yield salt and water are termed amphoteric oxides.

    • Examples: Aluminium oxide (Al2O3Al_2O_3) and zinc oxide (ZnOZnO).

    • Reactions of Aluminium Oxide (Al2O3Al_2O_3):

    • Reaction with acid (HClHCl):       Al2O3+6HCl→2AlCl3+3H2OAl_2O_3 + 6HCl \rightarrow 2AlCl_3 + 3H_2O

    • Reaction with base (NaOHNaOH):       Al2O3+2NaOH→2NaAlO2+H2OAl_2O_3 + 2NaOH \rightarrow 2NaAlO_2 + H_2O       (Where NaAlO2NaAlO_2 is sodium aluminate)

  • Variations in Reactivity towards Oxygen:

    • Potassium (KK) and Sodium (NaNa): React so rapidly with atmospheric oxygen that they ignite spontaneously if exposed to open air. To prevent accidental combustion, they are kept completely immersed in kerosene oil.

    • Magnesium (MgMg), Aluminium (AlAl), Zinc (ZnZn), Lead (PbPb): At ambient temperatures, their surfaces form a thin oxide film that acts as a protective shield against further oxidation.

    • Iron (FeFe): Bulk iron does not burn on heating, but fine iron filings burn vigorously when sprinkled directly into a flame.

    • Silver (AgAg) and Gold (AuAu): Do not react with oxygen even at high temperatures.

  • Anodising:

    • Anodising is an electrochemical process used to produce a thick, protective oxide layer on aluminium articles.

    • Fresh aluminium naturally forms a thin oxide layer in air, conferring resistance against corrosion.

    • During anodising, a cleaned aluminium object serves as the anode in an electrolysis bath containing dilute sulphuric acid (H2SO4H_2SO_4). Oxygen gas evolved at the anode reacts with the aluminium surface, generating a thick oxide coat that readily absorbs dyes for decorative finishes.

Reaction of Metals with Water

Metals react with water to yield metal oxides and hydrogen gas. Water-soluble metal oxides dissolve further to form metal hydroxides: Metal+Water→Metal Oxide+Hydrogen\text{Metal} + \text{Water} \rightarrow \text{Metal Oxide} + \text{Hydrogen} Metal Oxide+Water→Metal Hydroxide\text{Metal Oxide} + \text{Water} \rightarrow \text{Metal Hydroxide}

  • Reactions with Cold Water:

    • Potassium (KK) and Sodium (NaNa): React violently and exothermically with cold water. The liberated thermal energy ignites the evolving hydrogen (H2H_2) gas immediately:     2K(s)+2H2O(l)→2KOH(aq)+H2(g)+Heat2K(s) + 2H_2O(l) \rightarrow 2KOH(aq) + H_2(g) + \text{Heat}     2Na(s)+2H2O(l)→2NaOH(aq)+H2(g)+Heat2Na(s) + 2H_2O(l) \rightarrow 2NaOH(aq) + H_2(g) + \text{Heat}

    • Calcium (CaCa): Reacts less violently with cold water. The heat generated is insufficient to ignite hydrogen. Calcium floats because adhering hydrogen gas bubbles buoy the metal upward:     Ca(s)+2H2O(l)→Ca(OH)2(aq)+H2(g)Ca(s) + 2H_2O(l) \rightarrow Ca(OH)_2(aq) + H_2(g)

  • Reaction with Hot Water:

    • Magnesium (MgMg): Does not react with cold water but reacts with hot water to yield magnesium hydroxide (Mg(OH)2Mg(OH)_2) and hydrogen gas (H2H_2), floating as gas bubbles cling to its surface.

  • Reaction with Steam:

    • Aluminium (AlAl), Iron (FeFe), Zinc (ZnZn): Do not react with cold or hot water, but react with steam (H2O(g)H_2O(g)) to generate metal oxides and hydrogen gas:     2Al(s)+3H2O(g)→Al2O3(s)+3H2(g)2Al(s) + 3H_2O(g) \rightarrow Al_2O_3(s) + 3H_2(g)     3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)3Fe(s) + 4H_2O(g) \rightarrow Fe_3O_4(s) + 4H_2(g)

Action of steam on a metal
  • Metals Inert to Water: Lead (PbPb), copper (CuCu), silver (AgAg), and gold (AuAu) do not react with water or steam under any conditions.

Reaction of Metals with Acids

Metals react with dilute acids to generate a salt and hydrogen gas: Metal+Dilute Acid→Salt+Hydrogen Gas\text{Metal} + \text{Dilute Acid} \rightarrow \text{Salt} + \text{Hydrogen Gas}

  • Reaction with Dilute Hydrochloric Acid (HClHCl):

    • Magnesium (MgMg): Reacts most vigorously with dilute HClHCl, displaying the fastest bubble evolution and highest temperature rise.

    • Reactivity Order with Dilute Acid:     Mg>Al>Zn>FeMg > Al > Zn > Fe

    • Copper (CuCu): Exhibits no reaction with dilute HClHCl (no bubbles, no temperature change).

    • Caution: Sodium (NaNa) and potassium (KK) are excluded from testing due to dangerous, explosive reactivity.

  • Reaction with Nitric Acid (HNO3HNO_3):

    • Hydrogen gas (H2H_2) is not evolved when metals react with nitric acid.

    • Reason: Nitric acid (HNO3HNO_3) is a powerful oxidising agent. It oxidises generated hydrogen (H2H_2) into water (H2OH_2O) and is itself reduced to nitrogen oxides (N2ON_2O, NONO, or NO2NO_2).

    • Exceptions: Magnesium (MgMg) and manganese (MnMn) react with extremely dilute nitric acid (HNO3HNO_3) to release hydrogen gas (H2H_2).

  • Aqua Regia:

    • Aqua regia (Latin for "royal water") is a freshly prepared liquid mixture containing concentrated hydrochloric acid (HClHCl) and concentrated nitric acid (HNO3HNO_3) in a 3:13:1 volume ratio.

    • It is a highly corrosive, fuming reagent capable of dissolving noble metals such as gold (AuAu) and platinum (PtPt), even though neither concentrated acid can dissolve them independently.

Reaction of Metals with Solutions of Other Metal Salts

A more reactive metal displaces a less reactive metal from its salt solution in aqueous or molten states: Metal A+Salt solution of B→Salt solution of A+Metal B\text{Metal A} + \text{Salt solution of B} \rightarrow \text{Salt solution of A} + \text{Metal B}

  • Iron Nail in Copper Sulphate Solution:

    • Placing a clean iron nail (FeFe) into blue copper sulphate (CuSO4CuSO_4) solution initiates a single displacement reaction.

    • The solution turns light green owing to iron(II) sulphate (FeSO4FeSO_4) formation, while reddish-brown copper metal deposits on the iron nail.

    • Chemical Equation:     Fe(s)+CuSO4(aq)→FeSO4(aq)+Cu(s)Fe(s) + CuSO_4(aq) \rightarrow FeSO_4(aq) + Cu(s)

    • Conversely, placing a copper wire in an iron sulphate solution yields no reaction, confirming that iron is more reactive than copper.

Reaction of metals with salt solutions

The Reactivity Series (Activity Series)

The reactivity series is an arrangement of metals in descending order of their chemical activity.

Symbol

Element Name

Reactivity Status

KK

Potassium

Most reactive

NaNa

Sodium

High reactivity

CaCa

Calcium

High reactivity

MgMg

Magnesium

Medium reactivity

AlAl

Aluminium

Medium reactivity

ZnZn

Zinc

Medium reactivity

FeFe

Iron

Medium reactivity

PbPb

Lead

Medium reactivity

[H][H]

Hydrogen

Reference non-metal

CuCu

Copper

Low reactivity

HgHg

Mercury

Low reactivity

AgAg

Silver

Low reactivity

AuAu

Gold

Least reactive

How Metals and Non-Metals React

Chemical Reactivity and Electronic Configurations

  • The chemical reactivity of elements reflects their tendency to attain a completely filled valence electron shell (a stable octet or duplet arrangement), identical to noble gases.

  • Noble Gases: Helium (HeHe, atomic number 22, K: 22), Neon (NeNe, atomic number 1010, K: 22, L: 88), and Argon (ArAr, atomic number 1818, K: 22, L: 88, M: 88) possess fully filled valence shells and are chemically inert.

  • Metals: Possess 11, 22, or 33 electrons in their valence shell and tend to lose them to achieve a noble gas configuration, forming cations.

  • Non-metals: Possess 55, 66, or 77 electrons in their valence shell and tend to gain electrons to complete their octet, forming anions.

Electronic Configurations of Selected Elements

Element Category

Element Name

Atomic Number

K Shell

L Shell

M Shell

N Shell

Noble Gases

Helium (HeHe)

22

22

-

-

-


Neon (NeNe)

1010

22

88

-

-


Argon (ArAr)

1818

22

88

88

-

Metals

Sodium (NaNa)

1111

22

88

11

-


Magnesium (MgMg)

1212

22

88

22

-


Aluminium (AlAl)

1313

22

88

33

-


Potassium (KK)

1919

22

88

88

11


Calcium (CaCa)

2020

22

88

88

22

Non-metals

Nitrogen (NN)

77

22

55

-

-


Oxygen (OO)

88

22

66

-

-


Fluorine (FF)

99

22

77

-

-


Phosphorus (PP)

1515

22

88

55

-


Sulphur (SS)

1616

22

88

66

-


Chlorine (ClCl)

1717

22

88

77

-

Formation of Ionic Compounds

Ionic (or electrovalent) compounds are formed through the complete transfer of valence electrons from metal atoms to non-metal atoms.

Formation of Sodium Chloride (NaClNaCl)
  • Sodium (NaNa) has configuration 2,8,12, 8, 1. It loses 11 electron from its M shell to yield a sodium cation (Na+Na^+) with a neon octet (2,82, 8):   Na→Na++e−Na \rightarrow Na^+ + e^-   (Configurations: 2,8,1→2,82,8,1 \rightarrow 2,8)

  • Chlorine (ClCl) has configuration 2,8,72, 8, 7. It gains 11 electron into its M shell to yield a chloride anion (Cl−Cl^-) with an argon octet (2,8,82, 8, 8):   Cl+e−→Cl−Cl + e^- \rightarrow Cl^-   (Configurations: 2,8,7→2,8,82,8,7 \rightarrow 2,8,8)

  • Oppositely charged ions (Na+Na^+ and Cl−Cl^-) attract each other through powerful electrostatic forces to produce solid sodium chloride (NaClNaCl). NaClNaCl exists not as isolated molecules, but as three-dimensional ionic crystalline aggregates.

Formation of Magnesium Chloride (MgCl2MgCl_2)
  • Magnesium (MgMg) has configuration 2,8,22, 8, 2. It loses 22 valence electrons to form a magnesium cation (Mg2+Mg^{2+}):   Mg→Mg2++2e−Mg \rightarrow Mg^{2+} + 2e^-   (Configurations: 2,8,2→2,82,8,2 \rightarrow 2,8)

  • Two chlorine atoms (ClCl) accept one electron each:   2Cl+2e−→2Cl−2Cl + 2e^- \rightarrow 2Cl^-

  • Overall Transfer Reaction:   Mg+2Cl→Mg2++2[Cl]−→MgCl2Mg + 2Cl \rightarrow Mg^{2+} + 2[Cl]^- \rightarrow MgCl_2

  • In MgCl2MgCl_2, the cation is Mg2+Mg^{2+} and the anion is Cl−Cl^- (chloride).

Properties of Ionic Compounds

  • Physical Nature: Solid, hard materials due to intense inter-ionic attraction forces. They are brittle and fracture into pieces under mechanical stress.

  • Melting and Boiling Points: Possess extremely high melting and boiling points because significant heat energy is required to break the strong electrostatic interactions.

Ionic Compound

Melting Point (KK)

Boiling Point (KK)

NaClNaCl

1074 K1074\,K

1686 K1686\,K

LiClLiCl

887 K887\,K

1600 K1600\,K

CaCl2CaCl_2

1045 K1045\,K

1900 K1900\,K

CaOCaO

2850 K2850\,K

3120 K3120\,K

MgCl2MgCl_2

981 K981\,K

1685 K1685\,K

  • Solubility: Readily soluble in polar solvents like water (H2OH_2O), but insoluble in non-polar organic solvents such as kerosene and petrol.

  • Electrical Conduction:

    • Conduction of electricity requires mobile charge carriers (ions).

    • Solid ionic compounds do not conduct electricity because ions are fixed rigidly in crystal positions.

    • In aqueous solutions or molten states, ionic compounds conduct electricity efficiently because electrostatic forces are overcome by hydration or heat, allowing free ion migration toward electrodes.

Occurrence and Extraction of Metals (Metallurgy)

Core Terminology

  • Minerals: Naturally occurring chemical elements or inorganic compounds found within the earth's crust.

  • Ores: Specific minerals containing a high percentage of a metal that can be extracted commercially and profitably.

  • Gangue: Earthy impurities such as clay, sand, soil, and rock contaminating mined ores.

Metallurgical Categories of Metals

  1. Metals of Low Reactivity: Occur naturally in the free state or are easily reduced from oxides by heat alone (e.g., Gold AuAu, Silver AgAg, Platinum PtPt, Copper CuCu, Mercury HgHg).

  2. Metals of Medium Reactivity: Occur as oxides, sulphides, or carbonates; reduced using carbon (coke) or metal displacement (e.g., Zinc ZnZn, Iron FeFe, Lead PbPb).

  3. Metals of High Reactivity: Never occur free in nature; extracted exclusively via electrolytic reduction of molten salts (e.g., Potassium KK, Sodium NaNa, Calcium CaCa, Magnesium MgMg, Aluminium AlAl).

General Stages in Extraction

  • Ore Concentration / Enrichment: Removal of gangue using physical or chemical separation methods suited to property differences.

  • Conversion to Oxide:

    • Roasting: Heating concentrated sulphide ores strongly in excess air to form metal oxides.

    • Calcination: Heating concentrated carbonate ores strongly in limited air to form metal oxides.

  • Reduction: Reducing metal oxides to free metals using carbon or active metals.

  • Refining: Purifying crude extracted metal (e.g., via electrolytic refining).

Extracting Metals Low in the Activity Series

Oxides of unreactive metals decompose into pure metals upon heating alone.

  • Mercury Extraction from Cinnabar (HgSHgS):

    • Cinnabar (HgSHgS) is roasted in air to yield mercuric oxide (HgOHgO):     2HgS(s)+3O2(g)→Heat2HgO(s)+2SO2(g)2HgS(s) + 3O_2(g) \xrightarrow{\text{Heat}} 2HgO(s) + 2SO_2(g)

    • Mercuric oxide decomposes to liquid mercury on further heating:     2HgO(s)→Heat2Hg(l)+O2(g)2HgO(s) \xrightarrow{\text{Heat}} 2Hg(l) + O_2(g)

  • Copper Extraction from Copper Glance (Cu2SCu_2S):

    • Heating Cu2SCu_2S in air converts part of it to copper(I) oxide (Cu2OCu_2O):     2Cu2S+3O2(g)→Heat2Cu2O(s)+2SO2(g)2Cu_2S + 3O_2(g) \xrightarrow{\text{Heat}} 2Cu_2O(s) + 2SO_2(g)

    • Cu2OCu_2O reacts with remaining Cu2SCu_2S upon heating to yield liquid copper:     2Cu2O+Cu2S→Heat6Cu(s)+SO2(g)2Cu_2O + Cu_2S \xrightarrow{\text{Heat}} 6Cu(s) + SO_2(g)

Extracting Metals in the Middle of the Activity Series

Sulphides and carbonates of middle-series metals (Zn,Fe,Pb,CuZn, Fe, Pb, Cu) are converted into oxides prior to reduction.

  • Roasting vs. Calcination of Zinc Ores:

    • Roasting (Sulphide Ore - Zinc Blende, ZnSZnS):     2ZnS(s)+3O2(g)→Heat2ZnO(s)+2SO2(g)2ZnS(s) + 3O_2(g) \xrightarrow{\text{Heat}} 2ZnO(s) + 2SO_2(g)

    • Calcination (Carbonate Ore - Calamine, ZnCO3ZnCO_3):     ZnCO3(s)→HeatZnO(s)+CO2(g)ZnCO_3(s) \xrightarrow{\text{Heat}} ZnO(s) + CO_2(g)

  • Reduction of Metal Oxides using Carbon:

    • Zinc oxide is reduced by heating with carbon (coke):     ZnO(s)+C(s)→Zn(s)+CO(g)ZnO(s) + C(s) \rightarrow Zn(s) + CO(g)

  • Reduction using Displacement Reactions (Thermit Process):

    • Active metals like aluminium (AlAl) serve as powerful reducing agents.

    • Reduction of Manganese Dioxide:     3MnO2(s)+4Al(s)→3Mn(l)+2Al2O3(s)+Heat3MnO_2(s) + 4Al(s) \rightarrow 3Mn(l) + 2Al_2O_3(s) + \text{Heat}

    • Thermit Reaction for Iron(III) Oxide (Fe2O3Fe_2O_3):

    • Highly exothermic reaction producing liquid iron used to join railway tracks or repair cracked machine frames.     Fe2O3(s)+2Al(s)→2Fe(l)+Al2O3(s)+HeatFe_2O_3(s) + 2Al(s) \rightarrow 2Fe(l) + Al_2O_3(s) + \text{Heat}

Extracting Metals High in the Activity Series

Highly reactive metals (Na,Mg,Ca,AlNa, Mg, Ca, Al) cannot be reduced by carbon because they possess a greater chemical affinity for oxygen than carbon does.

  • Electrolytic Reduction:

    • Sodium, magnesium, and calcium are extracted by electrolysing their molten chlorides.

    • Reactions during Molten Sodium Chloride Electrolysis:

    • At Cathode (Negative Electrode - Reduction):       Na++e−→NaNa^+ + e^- \rightarrow Na

    • At Anode (Positive Electrode - Oxidation):       2Cl−→Cl2+2e−2Cl^- \rightarrow Cl_2 + 2e^-

    • Aluminium is extracted via the electrolytic reduction of molten aluminium oxide (Al2O3Al_2O_3).

Refining of Metals (Electrolytic Refining)

Crude metals obtained via reduction are purified using electrolytic refining (e.g., copper, zinc, tin, nickel, silver, gold).

  • Setup for Copper Refining:

    • Anode: Block of crude, impure copper.

    • Cathode: Thin sheet of pure copper.

    • Electrolyte: Acidified copper sulphate solution (CuSO4(aq)+H2SO4CuSO_4(aq) + H_2SO_4).

    • Process: Passing current causes copper from the impure anode to dissolve into the solution. Simultaneously, an equivalent quantity of pure copper deposits onto the cathode.

    • Anode Mud: Insoluble impurities settle at the bottom beneath the anode as anode mud, while soluble impurities remain dissolved.

Corrosion and Its Prevention

Corrosion Phenomena

Corrosion is the gradual chemical degradation of metals caused by reaction with environmental moisture, oxygen, and carbon dioxide.

  • Silver (AgAg): Turns black in air due to reaction with ambient sulphur, forming a surface layer of silver sulphide (Ag2SAg_2S).

  • Copper (CuCu): Reacts slowly with atmospheric carbon dioxide (CO2CO_2) and moisture, losing its brown shine to acquire a green coating of basic copper carbonate (CuCO3⋅Cu(OH)2CuCO_3 \cdot Cu(OH)_2).

  • Iron (FeFe): Develops a brown, flaky surface coating called rust (hydrated ferric oxide, Fe2O3⋅xH2OFe_2O_3 \cdot xH_2O) when exposed to moist air over extended periods.

Experimental Conditions for Iron Rusting

Testing clean iron nails in three sealed tubes over several days:

  • Tube A (Air + Water): Iron nails are exposed to both oxygen and liquid water. Result: Nails rust heavily.

  • Tube B (Boiled Water + Oil Layer): Water is boiled to expel dissolved air and sealed with a 1 mL1\,mL oil layer. Result: Nails do not rust.

  • Tube C (Dry Air + Anhydrous CaCl2CaCl_2): Air is dried using anhydrous calcium chloride (CaCl2CaCl_2) to absorb atmospheric moisture. Result: Nails do not rust.

  • Conclusion: Rusting requires simultaneous exposure to both oxygen and liquid water/moisture.

Investigating conditions under which iron rusts

Prevention of Corrosion

  • Barrier protection methods include painting, oiling, greasing, chrome plating, and anodising.

  • Galvanisation: Method of protecting steel and iron by applying a thin protective surface layer of zinc (ZnZn). Galvanised articles remain protected against rust even if the zinc coating is scratched, because zinc oxidises sacrificially.

  • Alloying: Modifying metal properties by combining them with other elements.

Alloys and Their Properties

An alloy is a homogeneous mixture of two or more metals, or a metal and a non-metal, formed by melting the primary metal and dissolving other constituents in exact proportions.

  • Stainless Steel: Mixing pure iron (FeFe) with carbon (0.05%0.05\%) increases hardness and strength. Adding nickel (NiNi) and chromium (CrCr) creates stainless steel, which is hard and rust-resistant.

  • Amalgam: Any alloy containing mercury (HgHg) as a constituent.

  • Gold Jewellery: Pure gold (24-carat24\text{-carat} gold) is extremely soft and deforms easily. It is alloyed with copper (CuCu) or silver (AgAg) to increase hardness. In India, 22-carat22\text{-carat} gold is standard for ornaments, comprising 2222 parts pure gold and 22 parts copper or silver.

  • Electrical Conductivity and Melting Points: Alloys possess lower electrical conductivity and lower melting points than their pure component metals.

    • Brass: Alloy of copper (CuCu) and zinc (ZnZn).

    • Bronze: Alloy of copper (CuCu) and tin (SnSn). Brass and bronze are poor electrical conductors compared to pure copper.

    • Solder: Alloy of lead (PbPb) and tin (SnSn). It has a low melting point and is used for soldering electrical wires.

Ancient Metallurgy: The Iron Pillar at Delhi

  • Constructed over 1600 years1600\,\text{years} ago near the Qutub Minar in Delhi by ancient Indian metallurgists.

  • Measures 8 m8\,m in height and weighs 6 tonnes6\,\text{tonnes} (6000 kg6000\,kg).

  • Has resisted rusting for centuries despite continuous weather exposure, demonstrating advanced ancient corrosion resistance technique.

Iron pillar at Delhi

Review Questions and Answers

Section 3.1 Questions

  1. Examples of metals matching specific criteria:

    • (i) Liquid at room temperature: Mercury (HgHg).

    • (ii) Easily cut with a knife: Sodium (NaNa), Potassium (KK), Lithium (LiLi).

    • (iii) Best conductor of heat: Silver (AgAg) and Copper (CuCu).

    • (iv) Poor conductor of heat: Lead (PbPb) and Mercury (HgHg).

  2. Meanings of Malleable and Ductile:

    • Malleable: Capable of being hammered or rolled into thin sheets without fracturing.

    • Ductile: Capable of being drawn into long, thin wires.

Section 3.2 Questions

  1. Why is sodium kept immersed in kerosene oil?

    • Sodium (NaNa) reacts rapidly with atmospheric oxygen and moisture, releasing hydrogen gas and heat, leading to violent spontaneous ignition. Storage under kerosene oil prevents contact with air and water.

  2. Chemical Equations:

    • (i) Iron reacting with steam:      3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)3Fe(s) + 4H_2O(g) \rightarrow Fe_3O_4(s) + 4H_2(g)

    • (ii) Calcium and Potassium reacting with water:      Ca(s)+2H2O(l)→Ca(OH)2(aq)+H2(g)Ca(s) + 2H_2O(l) \rightarrow Ca(OH)_2(aq) + H_2(g)      2K(s)+2H2O(l)→2KOH(aq)+H2(g)+Heat2K(s) + 2H_2O(l) \rightarrow 2KOH(aq) + H_2(g) + \text{Heat}

  3. Displacement Analysis Table for Metals A, B, C, and D:

Metal

Iron(II) sulphate

Copper(II) sulphate

Zinc sulphate

Silver nitrate

A

No reaction

Displacement

-

-

B

Displacement

-

No reaction

-

C

No reaction

No reaction

No reaction

Displacement

D

No reaction

No reaction

No reaction

No reaction

  • (i) Which is the most reactive metal?

    • Metal B is the most reactive because it displaces iron from iron(II) sulphate, while A, C, and D cannot.

  • (ii) Observation when B is added to Copper(II) sulphate:

    • Metal B will displace copper from copper(II) sulphate solution, discharging the blue color and depositing reddish copper metal.

  • (iii) Order of decreasing reactivity:      B>A>C>DB > A > C > D

  1. Gas produced with dilute hydrochloric acid and reaction of iron with dilute H2SO4H_2SO_4:

    • Hydrogen gas (H2H_2) is produced.

    • Reaction equation:      Fe(s)+H2SO4(aq)→FeSO4(aq)+H2(g)Fe(s) + H_2SO_4(aq) \rightarrow FeSO_4(aq) + H_2(g)

  2. Observation and chemical reaction when zinc is added to Iron(II) sulphate solution:

    • Observation: Zinc displaces iron from iron(II) sulphate solution. The greenish solution turns colorless as zinc sulphate forms, depositing grey iron metal.

    • Reaction Equation:      Zn(s)+FeSO4(aq)→ZnSO4(aq)+Fe(s)Zn(s) + FeSO_4(aq) \rightarrow ZnSO_4(aq) + Fe(s)

Section 3.3 Questions

  1. Electron-dot structures and formation of Na2ONa_2O and MgOMgO:

    • (i) Electron-dot representations:

      • Sodium (Na⋅Na\cdot)

      • Magnesium (: ⁣Mg:\!Mg)

      • Oxygen (\cdot\cdot\limits_{\cdot\cdot}^{\cdot\cdot}O:)

    • (ii) Formation of Na2ONa_2O and MgOMgO:

      • Na2ONa_2O: Two sodium atoms transfer one valence electron each to an oxygen atom:        2Na\cdot \; + \; \cdot\cdot\limits_{\cdot\cdot}^{\cdot\cdot}O: \; \rightarrow \; 2Na^+ \; + \; [\cdot\cdot\limits_{\cdot\cdot}^{\cdot\cdot}O\cdot\cdot]^{2-} \; \rightarrow \; Na_2O

      • MgOMgO: One magnesium atom transfers two valence electrons to an oxygen atom:        Mg:: \; + \; \cdot\cdot\limits_{\cdot\cdot}^{\cdot\cdot}O: \; \rightarrow \; Mg^{2+} \; + \; [\cdot\cdot\limits_{\cdot\cdot}^{\cdot\cdot}O\cdot\cdot]^{2-} \; \rightarrow \; MgO

    • (iii) Ions present:

      • In Na2ONa_2O: Cation Na+Na^+ and Anion O2−O^{2-}.

      • In MgOMgO: Cation Mg2+Mg^{2+} and Anion O2−O^{2-}.

  2. Why do ionic compounds have high melting points?

    • Ionic compounds consist of cations and anions bound by extremely strong electrostatic forces of attraction in a crystal lattice. Substantial heat energy is required to overcome these inter-ionic bonds.

Section 3.4 Questions

  1. Definitions:

    • (i) Mineral: Naturally occurring elemental or compound substances present in the earth's crust.

    • (ii) Ore: A mineral containing a high concentration of a specific metal that can be extracted economically.

    • (iii) Gangue: Earthy impurities (clay, sand, soil) contaminating mined ore.

  2. Two metals found in nature in the free state: Gold (AuAu) and Platinum (PtPt).

  3. Chemical process for obtaining a metal from its oxide: Chemical reduction (using carbon, coke, or reactive displacer metals like aluminium).

Section 3.5 Questions

  1. Heating metallic oxides of Zinc, Magnesium, and Copper with Zinc, Magnesium, and Copper:

Metal Oxide

Zinc (ZnZn)

Magnesium (MgMg)

Copper (CuCu)

Zinc Oxide (ZnOZnO)

No reaction

Displacement

No reaction

Magnesium Oxide (MgOMgO)

No reaction

No reaction

No reaction

Copper Oxide (CuOCuO)

Displacement

Displacement

No reaction

  1. Which metals do not corrode easily?

    • Noble metals low in the reactivity series such as gold (AuAu), platinum (PtPt), and silver (AgAg).

  2. What are alloys?

    • Homogeneous mixtures of two or more metals, or a metal and a non-metal, formed by melting the constituents together.

Chapter End Exercises

  1. Which pair will give displacement reactions?

    • Correct Option: (d) AgNO3AgNO_3 solution and copper metal.

    • Explanation: Copper is more reactive than silver and displaces silver ions from solution.

  2. Which method is suitable for preventing an iron frying pan from rusting?

    • Correct Option: (c) Applying a coating of zinc.

    • Explanation: Grease or paint would burn off during high-temperature cooking.

  3. An element reacts with oxygen to give a compound with a high melting point, soluble in water. The element is:

    • Correct Option: (a) Calcium.

    • Explanation: Calcium forms calcium oxide (CaOCaO), an ionic compound with a high melting point (2850 K2850\,K) that dissolves in water to form calcium hydroxide (Ca(OH)2Ca(OH)_2).

  4. Food cans are coated with tin and not with zinc because:

    • Correct Option: (c) Zinc is more reactive than tin.

    • Explanation: Zinc could react with acidic foods to form toxic salts.

  5. Distinguishing metals and non-metals with hammer, battery, bulb, wires, switch:

    • (a) Procedure:

      • Hammer test: Hammering flattens metals into thin sheets (malleable), whereas non-metals pulverize into powder (brittle).

      • Circuit test: Connect samples between terminal clips. Illuminating the bulb confirms electrical conduction (metal); failure to glow indicates an insulator (non-metal).

    • (b) Assessment: These tests effectively differentiate physical properties, though graphite (a non-metal) conducts electricity and soft alkali metals do not shatter.

  6. Amphoteric Oxides definition and examples:

    • Oxides that react with both acids and bases to yield salt and water are amphoteric oxides.

    • Examples: Aluminium oxide (Al2O3Al_2O_3) and Zinc oxide (ZnOZnO).

  7. Two metals that displace hydrogen from dilute acids, and two that will not:

    • Displace Hydrogen: Zinc (ZnZn) and Iron (FeFe).

    • Do NOT displace Hydrogen: Copper (CuCu) and Silver (AgAg).

  8. In electrolytic refining of metal M, what are anode, cathode, and electrolyte?

    • Anode: Block of crude, impure metal M.

    • Cathode: Thin sheet of pure metal M.

    • Electrolyte: Acidified aqueous solution of a soluble salt of metal M.

  9. Pratyush heating sulphur powder and collecting gas:

    • (a) Action of gas (SO2SO_2):

      • (i) Dry litmus paper: No color change.

      • (ii) Moist blue litmus paper: Turns red, as sulphur dioxide dissolves to form sulphurous acid (H2SO3H_2SO_3).

    • (b) Reaction equations:      S(s)+O2(g)→SO2(g)S(s) + O_2(g) \rightarrow SO_2(g)      SO2(g)+H2O(l)→H2SO3(aq)SO_2(g) + H_2O(l) \rightarrow H_2SO_3(aq)

  10. Two ways to prevent rusting of iron:

    • Galvanisation (zinc coating).

    • Painting or Alloying (creating stainless steel).

  11. Type of oxides formed when non-metals combine with oxygen:

    • Non-metals form acidic oxides (e.g., CO2CO_2, SO2SO_2) or neutral oxides (e.g., COCO, H2OH_2O).

  12. Reasons:

    • (a) Platinum, gold, and silver used for jewellery: Highly lustrous, extremely malleable, and corrosion-resistant.

    • (b) Sodium, potassium, lithium stored under oil: React violently with atmospheric oxygen and moisture.

    • (c) Aluminium used for cooking utensils despite high reactivity: Forms a tough, non-reactive protective surface oxide layer (Al2O3Al_2O_3) and conducts heat efficiently.

    • (d) Carbonate and sulphide ores converted to oxides during extraction: Reducing metal oxides using carbon is chemically simpler than reducing sulphides or carbonates directly.

  13. Why sour substances (lemon/tamarind) clean tarnished copper vessels:

    • Tarnished copper forms a basic green coating of copper carbonate (CuCO3⋅Cu(OH)2CuCO_3 \cdot Cu(OH)_2). The citric or tartaric acids in sour juices react with and dissolve the basic coat, restoring bright copper.

  14. Differentiation between metals and non-metals on the basis of chemical properties:

Chemical Property

Metals

Non-Metals

Nature of Oxides

Form basic or amphoteric oxides

Form acidic or neutral oxides

Reaction with Acid

Displace H2H_2 from dilute acids (above HH)

Do not displace H2H_2 from dilute acids

Reaction with Water

Displace H2H_2 gas from water/steam

Do not react with water or steam

Ion Formation

Form positive cations by losing electrons

Form negative anions by gaining electrons

Electrode Role

Function as reducing agents

Function as oxidising agents

  1. Goldsmith Solution Analysis:

    • The fraudulent goldsmith used Aqua Regia (a 3:13:1 mixture of concentrated HClHCl and concentrated HNO3HNO_3).

    • Aqua regia dissolved the outer dull gold surface, revealing shiny metal underneath but causing a severe weight loss as gold dissolved into solution.

  2. Why copper is used for hot water tanks and not steel (an alloy of iron):

    • Copper does not react with water or steam at any temperature.

    • Iron in steel reacts with steam to form iron oxide (Fe3O4Fe_3O_4) and hydrogen gas, causing severe internal corrosion. Additionally, copper conducts heat more effectively.