Introduction to Functions and Linear Modeling

Administrative Policies and Academic Resources

  • Class Drop Deadline: The deadline to drop any class is next Monday at 11:59 PM11:59\,\text{PM}.

    • Dropping a course by this deadline ensures it does not appear on the transcript or affect the student's record in any way.
    • Withdrawing is an alternative option later in the semester. A withdrawal remains on the record as a WW. While a WW does not affect the GPA, undergraduate students are typically limited to a specific number of withdrawals (approximately two or three).
  • Homework and Assignments:

    • The first homework assignment is due through Wiley Plus on Tuesday.
    • The assignment covers sections 1.11.1, 1.21.2, and 1.31.3.
    • While students may start early, the material for sections 1.21.2 and 1.31.3 will be finalized in class by the end of Monday.
  • Supplemental Instruction (SI):

    • The SI leader is an upperclassman who has successfully completed the course, acting as a student or teaching assistant.
    • They lead SI sessions at designated times and locations.
    • Other resources include the tutoring lab located in the Math Building and scheduled office hours.
  • Quizzes:

    • The first quiz is scheduled for next Wednesday.
    • It will cover material from sections 1.11.1, 1.21.2, and 1.31.3.
    • Quizzes are conducted in class with no outside help, which includes computer access, AI, or external assistance.
    • Calculators are permitted.
    • Quizzes comprise a relatively small portion of the final course grade; attendance and punctuality are the primary factors for success.

Fundamental Concepts: Relations and Functions

  • Relation: A set of two data sets that are associated with each other.

  • Function: A specific type of relation with well-defined inputs and outputs. For every single input, there can be only one corresponding output at any given point.

  • Discrete Variables: Values that change in specific "jumps" rather than through a continuous range. These variables typically do not involve an infinite string of decimal places (e.g., counting items).

  • Continuous Variables: Values that can be measured with increasing specificity or precision by zooming in on the measurement.

  • Continuous Function: A function whose graph has no gaps or jumps, regardless of how much one zooms in.

    • Informally, a continuous function can be drawn without lifting the pencil from the paper.
    • If a pencil must be moved to continue the graph, there is a gap or jump, making the function non-continuous.

Intercepts of a Function

  • Definition: Intercepts are the points where a graph or the values of a function intersect the axes.

  • Vertical Intercept (y-intercept):

    • The point where the graph hits the vertical axis (yy-axis).
    • To find it, set the independent variable (xx) to zero (x=0x = 0).
    • This occurs because at the vertical axis, there is no horizontal distance (length) to the side, only varying heights.
  • Horizontal Intercept (x-intercept):

    • The point where the graph hits the horizontal axis (xx-axis).
    • To find it, set the height or output value (yy or f(x)f(x)) to zero (y=0y = 0).
    • This occurs because at the horizontal axis, the location is neither above nor below the axis; therefore, the height must be zero.

Case Study: Linear Depreciation of Vehicle Value

  • Function Definition: The value of a car vv is a function of its age aa, expressed as v=g(a)v = g(a).

    • Equation: g(a)=18.97−1.8×ag(a) = 18.97 - 1.8 \times a
    • aa is measured in years.
    • vv is measured in thousands of dollars (1000s1000s).
  • Interpreting a Point: g(5)=9.97g(5) = 9.97

    • When the car is 55 years old, its value is 9.979.97 thousand dollars, or $9,970\$9,970.
  • Finding the Vertical Intercept:

    • Set the independent variable to zero: a=0a = 0.
    • g(0)=18.97−1.8×(0)=18.97g(0) = 18.97 - 1.8 \times (0) = 18.97.
    • Interpretation: When the car was brand new (00 years old), it was worth $18,970\$18,970.
  • Finding the Horizontal Intercept:

    • Set the output to zero: g(a)=0g(a) = 0.
    • 0=18.97−1.8×a0 = 18.97 - 1.8 \times a
    • 1.8×a=18.971.8 \times a = 18.97
    • a=18.971.8≈10.53888...a = \frac{18.97}{1.8} \approx 10.53888...
    • Interpretation: The car will be worth $0\$0 when it is approximately 10.5410.54 years old.

Mathematical Notation and Work Standards

  • Equation Flow: When showing work, do not use equal signs to link separate equations. For example, −1.8×a-1.8 \times a is not equal to aa.

    • Instead, use arrows (→\rightarrow or ⇒\Rightarrow) or vertical stacking to show the sequence of algebraic steps.
  • Partial Credit: Showing work clearly on quizzes and tests is essential for receiving partial credit even if the final result is incorrect.

Function Behavior and Interval Notation

  • Behavioral Definitions:

    • Increasing: A function ff is increasing if the values of f(x)f(x) increase as xx increases.
    • Decreasing: A function ff is decreasing if the values of f(x)f(x) decrease as xx increases.
    • Constant: A function ff is constant if the values of f(x)f(x) remain unchanged as xx increases.
  • Interval Notation:

    • Closed Interval: [a,b][a, b] corresponds to a≤t≤ba \le t \le b. This includes the endpoints.
    • Open Interval: (a,b)(a, b) corresponds to a<t<ba < t < b. This strictly includes values between the endpoints but not the endpoints themselves.
    • Half-Open/Half-Closed: Combinations such as [a,b)[a, b) or (a,b](a, b] are used when only one endpoint is included.

Linear Functions: The Concept of Slope

  • Rate of Change: The slope measures how the yy values change with respect to the xx values. It is often remembered as rise/run\text{rise/run}.

    • Formula for slope mm between two points (x1,y1)(x_1, y_1) and (x2,y2)(x_2, y_2): m=y2−y1x2−x1m = \frac{y_2 - y_1}{x_2 - x_1}.
  • Historical Example: Olympic Pole Vault:

    • Data: (1900,330)(1900, 330), (1904,350)(1904, 350), (1908,370)(1908, 370), (1912,390)(1912, 390).
    • Pattern: The height increased by 20 cm20\,cm every 44 years.
    • Function: y=5×t+330y = 5 \times t + 330, where tt is years since 19001900.
    • Calculated slope: m=350−3301904−1900=204=5 cm/yearm = \frac{350 - 330}{1904 - 1900} = \frac{20}{4} = 5\,cm/year.
  • Dangers of Extrapolation: Using this linear function for the 20162016 Olympics (t=116t = 116) predicts a height of 910 cm910\,cm (29.8 feet29.8\,feet). This is significantly higher than the actual recorded height of 603 cm603\,cm, demonstrating that a linear pattern may not hold indefinitely over time.

  • Slopes and Trends:

    • If m>0m > 0: The function is increasing.
    • If m<0m < 0: The function is decreasing.
    • If m=0m = 0: The function is constant (the yy values are the same).

Determining Linearity from Data

  • A data set is linear if the difference in yy values is proportional to the difference in xx values (creating a constant slope).
    • Example A: x∈{0,1,2,3}x \in \{0, 1, 2, 3\}, y∈{25,30,35,40}y \in \{25, 30, 35, 40\}. The jump in yy is always 55 for every jump of 11 in xx. Slope m=5m = 5. This is linear.
    • Example B: x∈{0,2,3,4}x \in \{0, 2, 3, 4\}, y∈{10,20,25,30}y \in \{10, 20, 25, 30\}. Between (0,10)(0, 10) and (2,20)(2, 20), the slope is 102=5\frac{10}{2} = 5. Between (2,20)(2, 20) and (3,25)(3, 25), the slope is 51=5\frac{5}{1} = 5. This is linear.
    • Example C: x∈{20,30,40,50}x \in \{20, 30, 40, 50\}, y∈{2.4,2.0,1.8,1.6}y \in \{2.4, 2.0, 1.8, 1.6\}. The jump from 2.42.4 to 2.02.0 is −0.4-0.4. The subsequent jumps are only −0.2-0.2. Because the rate of change is not constant, this is not a straight line.

Interpreting Linear Components: The Mile Record

  • Function: w=260−0.4×tw = 260 - 0.4 \times t

    • ww: World record time for one mile in seconds.
    • tt: Number of years since 19001900.
  • Interpreting the Intercept (260260): When t=0t = 0 (the year 19001900), the world record for the mile is estimated to be 260260 seconds.

  • Interpreting the Slope (−0.4-0.4): The negative slope indicates the record time is decreasing. Every year that passes (11 unit of tt), the world record mile time improves (decreases) by approximately 0.40.4 seconds.

Point-Slope Form

  • Equation for a line with a known slope mm and a known point (x1,y1)(x_1, y_1):
    • y−y1=m×(x−x1)y - y_1 = m \times (x - x_1).
  • This form is useful when the yy-intercept is not initially known. One can derive the slope-intercept form (y=mx+by = mx + b) from this by distributing mm and isolating yy.

Questions & Discussion

  • Question: In an interval where a graph stops at a specific point (e.g., at 77), should it be a bracket or a parenthesis for increasing/decreasing intervals?

    • Response: It is often vague whether a function is still "increasing" at a single instantaneous point. In the context of calculus, using open parentheses (e.g., (4,7)(4, 7)) is generally more appropriate to describe the behavior between points, though notation preferences may vary.
  • Question: If a graph goes off the edge of the display, should we assume it goes to negative infinity?

    • Response: Because the behavior outside the visible window is unknown, it is safer to only describe the intervals that are explicitly shown on the provided graph. For instance, if the graph starts at −6-6, use −6-6 as the starting point of the interval rather than assuming it extends to −∞-\infty.