PHY102 Comprehensive Course Study Notes

Fundamental Forces in Nature and the Basics of Electric Charge

The study of physics at the introductory level begins with a classification of the various forces in nature. These fundamental forces include gravity, the weak nuclear force, the strong nuclear force, and the electromagnetic force. This course, PHY102, focuses predominantly on electromagnetism, which governs the interactions between charged particles. Electric charge is an intrinsic property of matter, existing in two types: positive and negative. It is measured in Coulombs, denoted by the unit C\text{C}. Charge is conserved and quantized, meaning it exists in discrete multiples of the elementary charge, which is approximately 1.602×10−19 C1.602 \times 10^{-19}\,\text{C}.

Electrostatics: Coulomb’s Law and the Electric Field

Electrostatics refers to the study of stationary electric charges. The fundamental law governing the force between two point charges is Coulomb's Law. It states that the magnitude of the electrostatic force F\mathbf{F} between two point charges q1q_1 and q2q_2 is directly proportional to the product of the magnitudes of the charges and inversely proportional to the square of the distance rr between them. Mathematically, this is expressed as:

F=k⋅∣q1q2∣r2F = k \cdot \frac{|q_1 q_2|}{r^2}

where kk is Coulomb's constant, valued at approximately 8.99×109 N⋅m2/C28.99 \times 10^9\,\text{N}\cdot\text{m}^2/\text{C}^2. This constant is often rewritten in terms of the permittivity of free space ϵ0\epsilon_0 as k=14πϵ0k = \frac{1}{4\pi\epsilon_0}, where ϵ0≈8.854×10−12 F⋅m−1\epsilon_0 \approx 8.854 \times 10^{-12}\,\text{F}\cdot\text{m}^{-1}.

The presence of a charge modifies the surrounding space, creating an electric field E\mathbf{E}. The electric field at any point is defined as the force per unit charge experienced by a small positive test charge q0q_0 placed at that point:

E=Fq0\mathbf{E} = \frac{\mathbf{F}}{q_0}

For a point charge, the electric field is calculated as:

E=14πϵ0⋅qr2E = \frac{1}{4\pi\epsilon_0} \cdot \frac{q}{r^2}

Gauss’s Law and Electric Potential

Gauss's Law provides a powerful tool for calculating electric fields in systems with high degrees of symmetry (spherical, cylindrical, or planar). It relates the net electric flux ΦE\Phi_E through a closed Gaussian surface to the net enclosed charge QencQ_{\text{enc}}:

∮E⋅dA=Qencϵ0\oint \mathbf{E} \cdot d\mathbf{A} = \frac{Q_{\text{enc}}}{\epsilon_0}

Electric potential, denoted as VV, represents the potential energy per unit charge. It is a scalar quantity measured in Volts (V\text{V}), where 1 V=1 J/C1\,\text{V} = 1\,\text{J/C}. The relationship between the electric field and the electric potential is defined by the gradient:

E=−∇V\mathbf{E} = -\nabla V

For a point charge, the potential at a distance rr is:

V=14πϵ0⋅qrV = \frac{1}{4\pi\epsilon_0} \cdot \frac{q}{r}

Capacitance, Electric Dipoles, and Energy Storage

Capacitance is the ability of a system to store electric charge and energy. A capacitor typically consists of two conducting plates separated by an insulator or vacuum. Capacitance CC is defined as the ratio of the magnitude of the charge QQ on either plate to the potential difference VV between them:

C=QVC = \frac{Q}{V}

The unit of capacitance is the Farad (F\text{F}). For a parallel-plate capacitor with plate area AA and separation distance dd, the capacitance is:

C=ϵ0AdC = \frac{\epsilon_0 A}{d}

Electric dipoles consist of two equal and opposite charges ±q\pm q separated by a small distance dd. The dipole moment p\mathbf{p} is a vector pointing from the negative to the positive charge, defined as p=qd\mathbf{p} = q\mathbf{d}. When placed in an external electric field, a dipole experiences a torque given by τ=p×E\mathbf{\tau} = \mathbf{p} \times \mathbf{E}.

The potential energy UU stored in an electric field within a capacitor can be calculated using several equivalent formulas:

U=12CV2=12QV=Q22CU = \frac{1}{2}CV^2 = \frac{1}{2}QV = \frac{Q^2}{2C}

Conductors, Insulators, and Direct Current (DC) Circuit Analysis

Materials are categorized based on their ability to conduct charge. Conductors (such as copper) allow free movement of electrons, while insulators (such as rubber or glass) restrict this movement. Current II is the rate at which charge flows through a surface, measured in Amperes (A\text{A}):

I=dQdtI = \frac{dQ}{dt}

Ohm’s Law relates the voltage VV, current II, and resistance RR in many materials:

V=IRV = IR

Resistance is measured in Ohms (Ω\Omega). In DC circuit analysis, Kirchhoff’s Laws are fundamental: the Junction Rule (the sum of currents entering a junction equals the sum of currents leaving) and the Loop Rule (the sum of potential changes around any closed loop is zero).

Magnetostatics: Magnetic Fields and Forces

Magnetic fields B\mathbf{B} are produced by moving charges or currents. The force exerted on a charge qq moving with velocity v\mathbf{v} in a magnetic field is the Lorentz force:

F=q(E+v×B)\mathbf{F} = q(\mathbf{E} + \mathbf{v} \times \mathbf{B})

The magnetic force on a current-carrying wire of length LL is F=IL×B\mathbf{F} = I\mathbf{L} \times \mathbf{B}. Two primary laws describe the generation of magnetic fields:

  1. The Biot-Savart Law: Describes the magnetic field contribution dBd\mathbf{B} from a small current element IdlI d\mathbf{l}:

dB=μ04π⋅Idl×r^r2d\mathbf{B} = \frac{\mu_0}{4\pi} \cdot \frac{I d\mathbf{l} \times \mathbf{\hat{r}}}{r^2}

  1. Ampère’s Law: Relates the integrated magnetic field around a closed loop to the electric current passing through the loop:

∮B⋅dl=μ0Ienc\oint \mathbf{B} \cdot d\mathbf{l} = \mu_0 I_{\text{enc}}

where μ0=4π×10−7 T⋅m/A\mu_0 = 4\pi \times 10^{-7}\,\text{T}\cdot\text{m/A} is the permeability of free space. Magnetic dipoles and the energy stored in magnetic fields (often within inductors) are also critical components of magnetostatics. Dielectrics, although primarily discussed in electrostatics, play a role in how materials respond to applied fields.

Electromagnetic Induction and Faraday’s Law

Electromotive force (EMF), denoted as E\mathcal{E}, is a measure of the energy provided by a source per unit charge. Electromagnetic induction occurs when a changing magnetic flux ΦB\Phi_B induces an EMF. Faraday’s Law of Induction states:

E=−dΦBdt\mathcal{E} = -\frac{d\Phi_B}{dt}

The negative sign is explained by Lenz’s Law, which states that the direction of the induced current is such that it creates a magnetic field that opposes the change in flux that produced it. Inductance describes how a circuit component opposes changes in current. Self-inductance LL is defined by E=−LdIdt\mathcal{E} = -L \frac{dI}{dt}, and mutual inductance MM refers to the interaction between two coils. Transformers utilize these principles to step up or step down AC voltages using the ratio of turns in the primary (NpN_p) and secondary (NsN_s) coils:

VpVs=NpNs\frac{V_p}{V_s} = \frac{N_p}{N_s}

Maxwell’s Equations and Electromagnetic Waves

Maxwell’s equations summarize the entirety of classical electromagnetism. They consist of:

  1. Gauss's Law for Electricity: ∮E⋅dA=Qϵ0\oint \mathbf{E} \cdot d\mathbf{A} = \frac{Q}{\epsilon_0}
  2. Gauss's Law for Magnetism: ∮B⋅dA=0\oint \mathbf{B} \cdot d\mathbf{A} = 0
  3. Faraday's Law: ∮E⋅dl=−dΦBdt\oint \mathbf{E} \cdot d\mathbf{l} = -\frac{d\Phi_B}{dt}
  4. Ampère-Maxwell Law: ∮B⋅dl=μ0I+μ0ϵ0dΦEdt\oint \mathbf{B} \cdot d\mathbf{l} = \mu_0 I + μ_0 \epsilon_0 \frac{d\Phi_E}{dt}

These equations predict the existence of electromagnetic waves, which travel at the speed of light c=1μ0ϵ0≈3.00×108 m/sc = \frac{1}{\sqrt{\mu_0 \epsilon_0}} \approx 3.00 \times 10^8\,\text{m/s}. Electromagnetic oscillations in LCLC circuits involve the periodic transfer of energy between the electric field of a capacitor and the magnetic field of an inductor.

Alternating Current (AC) Circuits

AC voltages and currents vary sinusoidally with time, characterized by an angular frequency ω=2πf\omega = 2\pi f. When applied to components:

  1. Resistance (RR): Voltage and current are in phase.
  2. Inductance (LL): The voltage leads the current by 90∘90^\circ. Inductive reactance is XL=ωLX_L = \omega L.
  3. Capacitance (CC): The current leads the voltage by 90∘90^\circ. Capacitive reactance is XC=1ωCX_C = \frac{1}{\omega C}.

In combinations like the series RLCRLC circuit, the total opposition to current is the impedance ZZ, calculated as:

Z=R2+(XL−XC)2Z = \sqrt{R^2 + (X_L - X_C)^2}

Circuit analysis in AC focuses on determining the phase relationships and the resonance frequency at which XL=XCX_L = X_C.