Biochem exam 2

Protein structure and evolution: 2 multiple-choice (10 points)

1. Know the different experimental techniques used to determine protein structures (x-ray, and Cryo- EM).

  •  X- ray crystallography

    • crystalize the protein by purifying, crystallize, collect diffraction data, calculate electron density, fit known amino acids into density map..x-ray from crystal → diffraction pattern → electron density map → atomic model.

      • pros: no size limit, well established

      • cons: difficult to crystallize membrane proteins. when you make the atomic model, you loose the energy/motion the protein has.

  • Cryo-EM/ /single particle Reconstruction

    • 1. freeze concentrated protein sample. 2. electron beam passes thru sample and is deflected creating a 1D image. 3. images from proteins in the same orientation are added together to create class averages. 4. class averages are back projected to restore three-dimensional image

      • pros: works well for large protein complexes (viruses, 26S), no crystallization conditions required, rapid structural determination

      • cons: requires low ionic strength buffers, protein sample must be concentrated, computaionally intensive, expensive

  • NMR Spectroscopy

    • best for proteins in solution

    • proteins dissolved in solution (C13 or N15), magnetic fields detect interactions between atomic nuclei, build 3D model

      • pros: protein is in a native-like solution state

      • shows protein dynamics/flexibility

      • good for studying small proteins

2. What does the raw data look like for each of these techniques and how is that raw data transformed into an atomic model?

3. Understand the Blosum substitution matrices. How are they used, and what do the numbers mean.

Michaelis-Menten: 5 multiple-choice (25 points) 2 short answer (28 points)

4. What is a catalyst? How does a catalyst change the energy of the transition state?

  • Kinetics: how fast products are made

  • catalysts help provide the correct orientation (lowers reaction rate) AND increase the reaction rate by multiple orders of magnitude…works rapidly

    • increasing the temp → inc. in frequency of collisons = inc. reaction rate

    • inc concentration → more molecule formation = inc. reaction rate

      • mild reaction conditions, stereo-specific, apid

      • the energy of the transition state decreases with a catalyst

  • Transition state: intermediate species that forms as reactants are turning into products…highest energy species in the reaction

5. What is Km, what does it mean to have a low Km?

  • Km: dissociation constant

    • Vmax → ½ Vmax…straight down is Km value.

    • Vmax: max turnover when enzymes saturated

    • Km= How tightly enzyme and substrate bind…small Km: high affinity of enzyme for the substrat

  • To have a low Km is when the enzyme binds tightly/has a strong affinity to the substrate.

  • When substrate concentration equals Km, the reaction rate is exactly half of the maximum velocity.

  • When the substate concentration equals Km, exactly half of the enzyme active sites are occupied by substrate; 50% of the enzyme exists as the ES complex. Half of the enzymes are free, half of the enzyme is in the ES complex.

  • E+S →ES→E+P

6. Understand a basic kinetic experiment measuring and graphing [S] & V0 .

7. Know how to calculate Km, and ½ Vmax from a Michaelis-Menten or Lineweaver-Burk plot.

  • Km= K-1+Kcat/ K1

  • 1/2Vmax= Vmax/2

8. Understand the assumptions present when making Michaelis-Menten calculations, how does initial velocity (Vo) relate to these assumptions.

9. Know how to identify different types of inhibition.

  • Competitive inhibition:

    • no forward movement of product. looks structurallly like normal substrate..both substrate and inhibitor can fit into enzymes active syst…Km is increased while Vmax is unchanged…High Km=low affinity because its binding to the wrong substrate

  • Uncompetitive inhibition:

    • Km is decreased and ES complex lasts longer

    • Vmax is decreased

    • inhibitor binds exclusively to the enzyme substrate

    • binds only to ES complex….waits unti the substrate is already bound before attaching

  • Noncompetitive inhibition:

    • Km is unchanged

    • Vmax is decreased

    • binds to an enzyme at site different from active site

10. Understand what Kcat is and how it is calculated.

Kcat=Vmax/catalytic efficiency sec^-1microm^-1

11. Understand what Vmax is and how it is calculated.

  • max rate/velcoty of reactioin when enzyme is fully saturated with substrate

12. Understand catalytic efficiency and how it is calculated. reaction mechanisms: 3 multiple-choice (15 points)

  • catalytic efficiency: how efficientyl an enzyme converts substrate into product

  • Kcat/Km

Coenzymes: facilitate oxidation/reduction reactions or transfer of functional groups (acyl, methyl, etc)

metal ions: oxidation/readuction, electrostatic stabilization

water: depronation can create hydroxide ion- nucleophile

orientation: cage effect: reactant molecules are held in close juxtaposition…promotes reaction

active site is complementarity to the transition state

13. Understand how to read a reaction mechanism and identify how different molecules participate in the enzymatic reaction e.g. nucleophilic attack on the substrate.

Myoglobin and hemoglobin: 5 multiple-choice (25 points) 1 long response (16 points)

14. Understand the critical differences between hemoglobin and myoglobin and their biologic significance.

  • myoglobin (Mb)

    • monomeric heme protein binds and releases O2 in tissues

  • Hemeglobin (Hb)

    • tetrametic heme protein that transports O2 from lungs/gills to peripheral tissues

  • heme is iron-protoporphyrin IX…Fe2+ bound to protoporphyrin IX

  • Mb or Hb without heme is called an apoprotein, while with heme it is called holoprotein

  • Fe2+ has six coordinating positions: 4: Niotrogens of heme, 1: O2, 1:proximal histidine residue of globin protein

  • myoglobin, a-globin, and b-globin overlap in 3d structure

15. Understand oxygen dissociation (oxygen binding) curves, know the difference in the shape of these curves between myoglobin and hemoglobin, understand how cooperative binding influences the shape of the curve, understand how the binding curve relates to oxygen delivery between lungs and tissues.

  • myoglobin: high affinity for o2. P50

  • hemoglobin: lower affinity for o2.

    • myoglobin highest peak reachest closer to tissues than hemoglobin. Hemoglobin doesn’t give away nearly as much o2 to tissues.

16. What is p50, what does it represent, what is its significance/importance?

  • partial pressure of o2. at which hemoglobin 50% saturated with oxygen…how tightly hemoglobin is holding onto o2.

    • if hemoglobin is 50% loaded with 02, then the oxygen pressure here is P50.

    • direct measure of hemoglobin’s affinity for o2…low p50=high oxygen affinity/ high p50= low oxygen affinity

  • myoglobin: high affinity for 02

  • hemoglobin: lower affinity for o2

  • P50 tells you how easily oxygen is released to tissues…higher p50 (right shift) oxygen is releaed more easily into tissues (good for exercise, fever, high co2, low pH, high 2,3-BPG)

  • low p50 (left shift) = oxygen held more tightly (fetal hemoglobin, low co2, high pH, low temp)

17. Understand how oxygen, heme, iron, and critical amino acid residues interact in hemoglobin and how this facilitates a transition from the T to the R state.

18. What is the overall effect when the T (or R) state is stabilized; how does this influence oxygen delivery?

19. Understand how 2,3 BPG changes the shape of the oxygen binding curve for hemoglobin and what the significance of this change is from a biological perspective.

20. Understand the biochemistry of fetal hemoglobin, how it differs from adult hemoglobin and how this influences its binding affinity, T to R transition, ect.

Carbohydrates: 5 multiple-choice (25 points) 2 short answer (33 points) 1 long response (14 points)

21. Understand how to draw carbohydrates as both linear and cyclic structures.

22. Be able to recognize enantiomers, diastereomers, and anomers.

23. Know how to name monosaccharides and disaccharides.

24. Understand characteristics of monosaccharides and disaccharides including: identification of anomeric carbons, reducing sugars, aldoses, ketoses. 25. Understand how monosaccharides form polymers.

26. Know the differences between cellulose, amylose, amylopectin, glycogen, and chitin on a biochemical level.

27. Understand the challenges of studying carbohydrates inherent in their biochemistry.