Lecture Notes on Sound and Waves

Sound and Wave Phenomena

Basic Concepts

  • Velocity of Sound: Represented as vv.
  • Distance: Represented as dd.
  • Time: Represented as tt.

Calculations

  • Depth of Seabed:
    • Given: Echo time = 0.2 seconds, Velocity of sound in water = 1500 m/s.
    • Formula: d=vtd = vt
    • Calculation: d=1500×0.2=150d = 1500 \times 0.2 = 150 meters.
  • Distance Between Cliffs:
    • Echo times: 4 seconds and 8 seconds.
    • Velocity of sound: 340 m/s.
    • Distance to first cliff: d1=340×42=680d_1 = \frac{340 \times 4}{2} = 680 meters.
    • Distance to second cliff: d2=340×82=1360d_2 = \frac{340 \times 8}{2} = 1360 meters.
    • Total distance: d<em>1+d</em>2=680+1360=2040d<em>1 + d</em>2 = 680 + 1360 = 2040 meters.
  • Determining Distance using Echoes:
    • Initial setup: 4d=30504d = 3050 where dd is the unknown initial distance.
    • Calculate initial distance: d=30504=762.5d = \frac{3050}{4} = 762.5 meters.
    • Calculate Velocity: v=2dt=2×762.55=305v = \frac{2d}{t} = \frac{2 \times 762.5}{5} = 305 m/s

Reverberation

  • Definition: Prolonging of sound due to reflected sound reaching the ear within 0.1 seconds of the initial sound.
  • Reverberation time is shorter than echo time.

Sound Wave Characteristics

  • Production of sound by vibrating solids.
  • Speed of sound in solids, liquids, and gases.
  • Vibrating air columns.
  • Properties of musical sounds: Pitch and quality.
  • Response of the ear to sound waves.
  • Interference of sound waves.
  • Doppler's effect.

Sound Transmission

  • Sound travels at a constant speed in a mechanical medium.
  • Compression: Particles are compressed, increasing density.
  • Rarefaction: Density of the medium is lower than normal.

Ways of Producing Sound Waves

  1. Mechanical means (hitting an object).
  2. EM waves (pulsating system).
  3. Surface waves (ripple tank).

Refraction of Sound

  • Sound travels slowest at the ground level.
  • Refraction changes the direction of the wave, bending it upwards.
  • At night, the sound travels faster away from the ground, causing refraction back towards the earth.
  • Temperature changes at the boundary cause refraction.

Diffraction of Sound

  • Change in direction of a wave as it passes through an opening or around a barrier.
  • Amount of bending increases with increasing wavelength.
  • Sound is diffracted more than light due to its longer wavelength.
  • Explains why sound can be heard around corners.
  • Waves spread out or scatter while passing through slits or apertures.

Wave Equation and Properties

  • General Wave Equation: y=Asin⁡2π(ft−xλ)y = A \sin 2 \pi (ft - \frac{x}{\lambda})
    • Where:
      • yy is the displacement.
      • AA is the amplitude.
      • ff is the frequency.
      • tt is the time.
      • xx is the distance.
      • λ\lambda is the wavelength.
  • Wave travels a distance of 0.5m in 5 seconds, wavelength = 2m
    • v=d/t=0.5/5=0.1m/sv = d/t = 0.5/5 = 0.1 m/s
    • f=v/λ=0.1/2=0.05Hzf = v/\lambda = 0.1/2 = 0.05 Hz
  • Period of a wave with wavelength 0.7m and speed of 180 m/s
    • T=1f=λv=0.7180=0.0039s=3.9×10−3sT = \frac{1}{f} = \frac{\lambda}{v} = \frac{0.7}{180} = 0.0039 s = 3.9 \times 10^{-3} s
  • Calculate the speed of a wave when λ=8m\lambda = 8m and T=0.6secT = 0.6sec.
    • v=λT=80.6=13.3m/sv = \frac{\lambda}{T} = \frac{8}{0.6} = 13.3 m/s
    • Phase difference: ϕ=2πxλ=2×3.142×38=2.36\phi = \frac{2 \pi x}{\lambda} = \frac{2 \times 3.142 \times 3}{8} = 2.36

Beats

  • Beats occur due to the difference in two close frequencies.
  • Piano tuners use beats to tune wires finely.
  • Beats disappear when frequencies are the same.
  • We can't hear beats when the difference in frequency is more than 7 Hz.

Wave Equations and Calculations

  • Given equation: y=4sin⁡2π(0.5x−100t)y = 4 \sin 2 \pi (0.5x - 100t)
    • Amplitude (A) = 4m
    • Wavelength (λ\lambda): 2π(0.5x)=2πxλ  ⟹  λ=10.5=2m2 \pi (0.5x) = \frac{2 \pi x}{\lambda} \implies \lambda = \frac{1}{0.5} = 2m
    • Frequency (f): 2π(100t)=2πft  ⟹  f=100Hz2 \pi (100t) = 2 \pi ft \implies f = 100 Hz
    • Velocity (v): v=fλ=100×2=200m/sv = f \lambda = 100 \times 2 = 200 m/s
  • Plane progressive wave: y=8sin⁡(120πt+π4x)y = 8 \sin (120 \pi t + \frac{\pi}{4} x)
    • Amplitude (A) = 8m
    • Frequency (f): 2πf=120π  ⟹  f=60Hz2 \pi f = 120 \pi \implies f = 60 Hz
    • Wavelength (λ\lambda): 2πλ=π4  ⟹  λ=8m\frac{2 \pi}{\lambda} = \frac{\pi}{4} \implies \lambda = 8m
    • Velocity (v): v=fλ=60×8=480m/sv = f \lambda = 60 \times 8 = 480 m/s
  • Sinusoidal wave equation: y=Asin⁡2π(ft−xλ)y = A \sin 2 \pi (ft - \frac{x}{\lambda})
    • Given: A = 0.08m, λ=2m\lambda = 2m, v = 20m/s
    • f=vλ=202=10Hzf = \frac{v}{\lambda} = \frac{20}{2} = 10 Hz
    • y=0.08sin⁡2π(10t−x2)y = 0.08 \sin 2 \pi (10t - \frac{x}{2})

Phase Difference

  • Phase difference at a distance λ\lambda corresponds to 2π2\pi.
  • General equation: y=Asin⁡ωt=Asin⁡2πfty = A \sin \omega t = A \sin 2 \pi ft
  • Also, y=Asin⁡2πf(t−xv)y = A \sin 2 \pi f (t - \frac{x}{v})
  • Since f=1Tf = \frac{1}{T} and v=fλv = f \lambda
  • y=Asin⁡2π(tT−xλ)y = A \sin 2 \pi (\frac{t}{T} - \frac{x}{\lambda})

Wavelength and Wave Types

  • Transverse wave:
    • Distance between crest and crest or trough and trough = λ\lambda
    • Distance between crest and trough = λ2\frac{\lambda}{2}
  • Longitudinal wave:
    • Distance between compression and compression = λ\lambda
    • Distance between compression and rarefaction = λ2\frac{\lambda}{2}

Echoes and Reverberation

  • Time before an echo is heard depends on the distance between the source and the reflecting object.
  • Sensation of sound persists in the ear for about 0.1 seconds.
  • Echoes occur when reflected sound reaches the ear more than 0.1 seconds after the original sound.
  • Reverberation is the persistence of sound after the source has stopped.

Sound Reflection

  • Smooth walls reflect sound waves in a specific direction.
  • Rough walls disperse sound, making a room lively.

Uses of Echoes

  • Measurement of the depth of the ocean.
  • Detecting flaws in metal casting.
  • Measuring velocity.

Reverberation in Musical Settings

  • Enhances sound quality in musical symphonies and orchestra halls.
  • Divergent room with no sound-absorbing surfaces causes difficulties in hearing due to reflected sound waves.

Sound Refraction

  • Occurs when sound waves pass from one medium to another with differing density.
  • Caused by the natural temperature gradient of the atmosphere.

Interference

  • Interaction of two or more sound waves from different sources.
  • Can be constructive or destructive.
  • Constructive interference increases amplitude; destructive interference reduces amplitude.
  • Dead spots occur when compression and rarefaction cancel each other.
  • Engineers account for sound wave interference in auditorium design.

Beats

  • Occur when two sound waves of slightly different frequencies travel along the same straight line.

Wave Motion

  • Wave: A disturbance or oscillation that is a function of displacement and time.
  • Process of transferring energy from one point to another without movement of the medium itself.
  • Waves can be mechanical or electromagnetic.
Basic Terms
  • Waveform: The shape of the wave.
  • Amplitude (A): Maximum vertical displacement.
  • Frequency (f): Number of oscillations per unit time; measured in Hertz (Hz).
    • f=1Tf = \frac{1}{T}
  • Period (T): Time taken to complete one cycle.
    • T=1fT = \frac{1}{f}
  • Wavelength (λ\lambda): Distance between corresponding points; greatest when it travels fastest.
  • Wave Velocity (v): Velocity with which a wave propagates in a medium.
    • v=fλv = f \lambda
Types of Waves
  • Transverse
  • Longitudinal
  • Stationary
  • Progressive
Properties of Waves
  • Reflection
  • Refraction
  • Diffraction
  • Interference
  • Beats
  • Superposition
  • Dispersion
Transverse vs. Longitudinal Waves
FeatureTransverse WaveLongitudinal Wave
Particle MotionPerpendicular to wave directionParallel to wave direction
ExamplesLight, heat, EM waves, water wavesSound waves, waves from vibrating tuning forks
Associated FeaturesCrests and troughsCompressions and rarefactions
Medium RequirementNo medium requiredRequires a material medium
PolarizationCan be polarizedCannot be polarized
Vacuum TravelTravels in a vacuumDoes not travel through a vacuum
Velocity in Dense MediumGreatest in a vacuumIts velocity is greatest in a Vacuum

Progressive vs. Stationary Waves

FeatureProgressive WaveStationary Wave
FormationMechanical or electromagneticSuperposition of two identical waves traveling in opposite directions
Wave TypeTransverse or longitudinalAlways transverse
Equationy=Asin⁡(ωt±kx)y = A \sin (\omega t \pm kx)
Phase difference ϕ=2πλx\phi = \frac{2\pi}{\lambda} xy=2Asin⁡(ωt)cos⁡(kx)y = 2A \sin(\omega t) \cos(kx)
Phase difference = Nodes and antinodes
AmplitudeConstant, high amplitudeDifferent, low amplitude
VibrationsVibrations are out of phaseThe Vibrations are in phase

Wave Equations

  • Progressive wave equations: y=Asin2πfty = A sin2 \pi ft
  • y=Acos2πfty = A cos2 \pi ft
  • y=Asin(ωt±ϕ)y = Asin (\omega t \pm \phi), ω=2πf,k=2πλ\omega = 2 \pi f, k= \frac{2 \pi}{\lambda}
    y=Asin(ωt−kx)y = A sin (\omega t - kx)
  • Minus wave is moving in the +ve x direction
  • If sigh is positive, wave is moving in the -ve x direction

Sound Interference and Beats

  • When two waves meet while traveling along the same medium. The point would remain at rest
  • Locations with continuous constructive interference are anti-nodes, while those with destructive interference are nodes.
  • Difference: Interference occurs when two waves of the same frequency superimpose, while beats are formed when frequencies are slightly different.
  • In interference, the resultant amplitude is constant; in beats, it is not.
Beats Calculation
  • Beat frequency = ∣f<em>1−f</em>2∣|f<em>1 - f</em>2|
    number of beats that has feq. of 470 Hz, with a tuning fork 435Hz in 10 seconds?
    *Number of Beats=Beatfreq.= Beat freq. \timestime=(470−435)time = (470-435) \times 10 = 350 beats
    6)What number of beats, does flute generate with waves 264Hz and 262Hz
    Beat= 264-262 = 242

Wave Phenomena

  • Crest: Maximum displacement above the mean position.
  • Trough: Maximum displacement below the mean position.
  • Wave Velocity: The velocity with which a wave propagates in a medium.

Uses of Echoes/Sound Navigation

  • V = 20d/t
  • used in medical science, ex) echocardiography use imaging organs
  • cardiography
  • Ultrasonography.
  • Dolphins & Fishermen By bet dolphins and fishermen to defect an destruction.

Disadvantage and reducing Echo:

*Makes sound unclear due to multiple reflections.
Reduction:

  • padding the walks, having number of windows within room
    *Fill with absorbers.

Calculating Echo

  • A man free his gun and hears it seconds later. Now moves 305 mtowardsthehillandhearsagaininjusttowards the hill and hears again in just3 seconds, what speed of hill, and distance where he fired initially
    V= \frac{2d}{t}$$

Production of Sound

  • Sound wave: A longitudinal wave produced by mechanical vibration.
  • Tuning fork: Acoustic resonator that vibrates at a specific pitch.
  • Vibration of the prongs produces compressions and rarefactions in the surrounding air.
The source of all sound it Vibrating sound that
Source of Vibration:
  • By mechanical (Back and forth Vibration the particle of the medium which, result from back and forth

Additional points

  • When compression is passed to region it to pull small particle to creaking is high pressure. But if passed to rarefraction, then tends to push particles and create low pressure
    *When both inter, and cancel particle it cause no displaced displacement.