Chapter 18: Aldehydes and Ketones - Nucleophilic Addition Reactions

Chapter 18: Aldehydes & Ketones - Nucleophilic Addition Reactions

Overview

This chapter covers the chemistry of carbonyl compounds focusing on aldehydes and ketones. The primary topics include:

  1. Naming aldehydes and ketones.

  2. Nucleophilic additions:    - Addition of hydride (H−H^-), carbanions (R−R^-), or cyanide (CN−CN^-).    - The Wittig reaction.    - Addition of primary (1∘1^\circ) or secondary (2∘2^\circ) amines.    - Addition of water (H2OH_2O) or alcohols (ROHROH).

  3. Nucleophilic addition to α,β\alpha, \beta-unsaturated aldehydes and ketones.

Assigned Homework Problems

The following problems are assigned for practice:

  • 41(a~d), 43, 44, 46, 47, 48, 56, 58.

Structural Features and Properties

Two primary structural features determine the chemistry of aldehydes and ketones:

  • Nucleophilic Reactivity: Aldehydes and ketones react with nucleophiles due to the presence of the carbonyl group.

  • Electrophilic Carbon: The carbonyl carbon is electron-deficient (δ+\delta+) and serves as an electrophilic site.

General Reactions of Carbonyl Compounds
  • The carbonyl group consists of a C=O\text{C}=O double bond with a π\pi bond.

  • The oxygen is more electronegative (δ−\delta-) while the carbon is electrophilic (δ+\delta+).

  • The carbonyl carbon is sp2sp^2 hybridized, uncrowded, and planar, making it accessible for nucleophilic attack.

Nomenclature of Aldehydes

IUPAC Rules
  • Acyclic Aldehydes: Find the longest chain containing the CHO\text{CHO} group. Change the "-e" ending of the parent alkane to the suffix "-al".

  • Cyclic Aldehydes: If the CHO\text{CHO} group is bonded to a ring, name the ring and add the suffix "-carbaldehyde".

  • Numbering: Number the chain or ring to put the CHO\text{CHO} group at C1C1. This number is omitted from the name as the aldehyde group is inherently at the end of the chain.

  • Apply all other standard IUPAC rules for substituents.

Common Names

Similar to carboxylic acids, many simple aldehydes have widely used common names formed by taking the common parent name and adding the suffix "-aldehyde".

Nomenclature of Ketones

IUPAC Rules
  • Suffix: All ketones are identified by the suffix "-one".

  • Chain Selection: Find the longest continuous chain containing the carbonyl group. Change the "-e" ending of the parent alkane to the suffix "-one".

  • Numbering: Number the carbon chain to give the carbonyl carbon the lowest possible number.

  • Cyclic Ketones: Numbering always begins at the carbonyl carbon (C1C1). The "1" is usually omitted from the name. The ring is then numbered clockwise or counterclockwise to give the first substituent the lower number.

Common Names
  • Common names are formed by naming both alkyl groups attached to the carbonyl carbon, arranging them alphabetically, and adding the word "ketone".

  • Special Common Names:   - Acetone: CH3COCH3\text{CH}_3\text{COCH}_3   - Acetophenone: A phenyl group bonded to an acetyl group.   - Benzophenone: Two phenyl groups bonded to a carbonyl.

Practice: Naming Ketones and Acyl Groups

  • Example 1: A 5-carbon ketone with a methyl group. Name: 2-methylpentan-3-one (or 2-methyl-3-pentanone).

  • Example 2: Acetophenone (C6H5COCH3\text{C}_6\text{H}_5\text{COCH}_3).

  • Example 3: 3-isopropyl-4-methylcyclohexanone.

Reactivity of Aldehydes and Ketones

Aldehydes are generally more reactive than ketones toward nucleophilic attack for two reasons:

  1. Electronic Effects: Aldehydes have only one electron-donating alkyl group to stabilize the δ+\delta+ on the carbonyl carbon, whereas ketones have two. Less stabilization makes the carbon more electrophilic.

  2. Steric Effects: Aldehydes are less crowded than ketones, allowing nucleophiles to approach the carbonyl carbon more easily.

Reactivity Trend: As the number of R groups around the carbonyl carbon increases, the reactivity decreases.

General Mechanism: Nucleophilic Addition

Nucleophilic addition occurs via a two-step process:

  1. Nucleophilic Attack: The nucleophile (Nu:-) attacks the electrophilic carbonyl carbon, breaking the π\pi bond and moving electrons to oxygen to form a tetrahedral alkoxide intermediate.

  2. Protonation: The alkoxide is protonated (usually by water or acid) to form the addition product.

Acid-Catalyzed Nucleophilic Addition

In acidic conditions, the carbonyl oxygen is protonated first (C=O+−H\text{C}=O^+-\text{H}), which significantly increases the electrophilicity of the carbonyl carbon, making it more susceptible to attack by even weak nucleophiles (HNu\text{HNu}).

Summary of Addition Reactions

Reagent

Nucleophile (Nu−\text{Nu}^-)

Final Product

[1] NaBH4NaBH_4 or LiAlH4LiAlH_4; [2] H2OH_2O

Hydride (H−H^-)

Alcohol

[1] RMgXRMgX or RLiRLi; [2] H2OH_2O

Carbanion (R−R^-)

Alcohol (new C−C\text{C}-\text{C} bond)

NaCN/HClNaCN / HCl

Cyanide (CN−CN^-)

Cyanohydrin

Ph3P=CR2Ph_3P=CR_2

Wittig Reagent

Alkene

RNH2RNH_2 (mild acid)

Primary Amine

Imine (Schiff base)

R2NHR_2NH (mild acid)

Secondary Amine

Enamine

ROHROH, H+H^+

Alcohol

Acetal (via Hemiacetal)

Specific Nucleophilic Additions

1. Nucleophilic Addition of Hydride
  • Reagents: NaBH4NaBH_4 (sodium borohydride) or LiAlH4LiAlH_4 (lithium aluminum hydride).

  • Product: Reduction of the carbonyl to a 1∘1^\circ (from aldehyde) or 2∘2^\circ (from ketone) alcohol.

2. Nucleophilic Addition of Organometallic Reagents
  • Reagents: Organolithium (RLiRLi) or Grignard reagents (RMgXRMgX).

  • Metals: Li, Mg, and Cu (organocuprates).

  • Reactivity: RLiRLi and RMgXRMgX are highly reactive due to very polar carbon-metal bonds (CC bears a partial negative charge). Organocuprates (R2CuLiR_2CuLi) are less reactive; although they have two R groups, only one is used.

  • Outcome: Formation of C−C\text{C}-\text{C} bonds to yield 1∘1^\circ, 2∘2^\circ, or 3∘3^\circ alcohols.

3. Nucleophilic Addition of Cyanide (CN−CN^-)
  • Reaction: Carbonyl + CN−→CN^- \rightarrow Cyanohydrin.

  • Disadvantage: Hydrogen cyanide (HCNHCN) is extremely toxic and volatile.

  • Hydrolysis: Cyanohydrins can be converted to carboxy groups (COOHCOOH) by heating with aqueous acid or base. Treatment with base can also reverse the reaction back to the carbonyl.

4. The Wittig Reaction
  • Purpose: Converts a carbonyl (C=O\text{C}=O) into an alkene (C=C\text{C}=\text{C}).

  • Wittig Reagent: An organophosphorus species called an ylide (phosphorane). It contains a phosphorus atom bonded to three phenyl groups (Ph3PPh_3P) and a carbon bearing a negative charge.

  • Resonance: The reagent is neutral but has two resonance structures: one with a P=CP=C double bond and one with charge separation (P+−C−P^+ - C^-). The carbon is nucleophilic.

  • Synthesis:   1. Reaction of Ph3PPh_3P with an alkyl halide.   2. Deprotonation with a strong base like Butyllithium (BuLiBuLi).

  • Mechanism: Forms a four-membered ring intermediate called an oxaphosphetane, which collapses to form an alkene and triphenylphosphine oxide (Ph3P=OPh_3P=O).

5. Addition of Primary Amines
  • Reagent: RNH2RNH_2 (primary amine) under mild acid catalyst.

  • Product: Imine (C=N−R\text{C}=N-R), also called a Schiff base.

  • Mechanism: Nucleophilic addition to form a carbinolamine, followed by dehydration (loss of H2OH_2O).

6. Addition of Secondary Amines
  • Reagent: R2NHR_2NH (secondary amine) under mild acid catalyst.

  • Product: Enamine (nitrogen bonded to a double bond carbon: N−C=CN-C=C).

  • Difference from Imines: Intermediate iminium ions from 2∘2^\circ amines have no proton on the nitrogen to lose; therefore, a proton is removed from the adjacent (beta) carbon to form the C=C\text{C}=\text{C} bond.

7. Hydration (Addition of H2OH_2O)
  • Reaction: Carbonyl + H2O⇌H_2O \rightleftharpoons Gem-diol (1,1-diol).

  • Catalysis: Can be acid or base catalyzed.

  • Stability: Gem-diols are typically unstable and favor the carbonyl starting material, except for unhindered aldehydes (like formaldehyde) or those with electron-withdrawing groups.

8. Addition of Alcohols (Acetal Formation)
  • Reagents: Two equivalents of alcohol (ROHROH) and an acid catalyst (like TsOHTsOH).

  • Steps:   1. Formation of a hemiacetal (one equivalent of alcohol added).   2. Formation of an acetal (two equivalents of alcohol added).

  • Cyclic Acetals: Formed when a diol (like ethylene glycol) is used.

  • Properties: Acetals are stable in base but easily hydrolyzed back to the carbonyl in aqueous acid.

Cyclic Hemiacetals

  • Five- and six-membered cyclic hemiacetals are stable and can be isolated.

  • They are formed by the intramolecular cyclization of hydroxy aldehydes.

Acetals as Protecting Groups

  • Utility: Used to protect aldehydes and ketones from basic or nucleophilic reagents (like during the reduction of an ester elsewhere in the molecule).

  • Process:   1. Protect: Convert the ketone/aldehyde to an acetal (which is inert to bases/hydrides).   2. React: Carry out the desired reaction on another part of the molecule (e.g., reducing an ester with LiAlH4LiAlH_4).   3. Deprotect: Use aqueous acid to hydrolyze the acetal back to the original carbonyl.

Questions and Discussion

Q) Rank the compounds in order of increasing reactivity towards nucleophilic attack.

  • Answer: Reactivity depends on sterics and electronics. Formaldehyde (no R groups) > Aldehydes (one R group) > Ketones (two R groups). Bulky R groups further decrease reactivity.

Q) Draw the product for the reaction of a ketone with CH3NH2CH_3NH_2 and mild acid.

  • Answer: The product is an imine where the OO is replaced by the N−CH3N-CH_3 group.

Q) What 1-degree amine and carbonyl compound are needed to prepare a specific imine?

  • Strategy: Break the C=NC=N double bond. The carbon side becomes the carbonyl (C=OC=O) and the nitrogen side becomes the primary amine (RNH2RNH_2).

Q) Retrosynthetic Analysis of Wittig Reactions.

  • Strategy: To prepare an alkene, split the double bond. One side comes from the carbonyl compound and the other from the phosphorus ylide.