marine

Important Terms

Salinity: amount of dissolved solids (measured in ppt = parts per thousand)

Latent heat: Energy absorbed or released during phase change.

Rule of Constant Proportions: The ratio of major ions in seawater remains constant, regardless of salinity level

Thermocline: Distinct layer in a body of water, like the ocean or a lake, where the temperature decreases rapidly with depth, separating a warmer, lighter surface layer from a colder, denser bottom layer

Autotrophs: make food from inorganic nutrients (photosynthesis/chemosynthesis)

Heterotrophs: consume organic material (all animals)

Chemosynthesis: Uses chemical energy (not light) to fix carbon.

Photic Zone: Upper sunlit layer where photosynthesis > respiration

Chlorophyll a: Proxy for phytoplankton biomass and productivity.

Benthic: at the lowest level of a body of water

Neretic: relatively shallow part of the ocean above the drop-off of the continental shelf

Epipelagic: the uppermost layer of the ocean (extends down to ~600M)

Mesopelagic: intermediate depths of the sea (extends between ~600-3,500M)

Bathopelagic: deep sea (1,000-3,000M below sea level)

Continental shelf: extends from the shore to the steep drop-off known as the shelf break

Continental rise: marks the transition from the continental margin to the deep ocean floor

Euphotic zone: the “sunlight” zone

Aphotic zone: the deep part of an ocean or lake where sunlight cannot penetrate

Oligotrophic: Nutrient-depleted waters

Intertidal zone: submerged by ocean water at high tide and exposed to the air at low tide

Abyssal plain: thick layers of fine-grained sediments covering a volcanic rock base

Subduction zone: a type of tectonic plate boundary where one tectonic plate, typically oceanic and denser, slides beneath another, less dense plate, plunging into the Earth's mantle

Ridge zone: a long, narrow, elevated geomorphologic landform

Divergent zone: tectonic boundary; two plates move apart, resulting in the creation of new crust

Melting (solid → liquid)

Freezing (liquid → solid)

Evaporation (liquid → gas)

Condensation (gas → liquid)

Deposition (gas → solid)

Sublimation (solid → gas)

The Chemical Features of Seawater (Ch. 3)
Importance of Water in Marine Life:
  • Marine organisms are 80–95% water
Water Chemistry

Hydrogen bonds hold water molecules together

  • These bonds explain water’s high heat capacity, surface tension, and solvent abilities:
    • High attraction of hydrogen molecules to partially negative oxygen molecules; extremely hard to overcome
States of Seawater: Solid (ice), liquid (water), gas (vapor)
Density behavior:
  • Density increases as water cools until 4 ∘C4 \,^\circ C (densest here) then decreases as it freezes (ice floats)
  • Due to: the solutes within seawater prevents water from completely freezing.
    • Cold water = more dense
    • Warm water = less dense
Heat & Water

Water = high heat capacity: Water resists temperature change, stabilizing climate

  • Latent heat: Energy absorbed or released during phase changes:
    • Melting (solid → liquid)
    • Freezing (liquid → solid)
    • Evaporation (liquid → gas)
    • Condensation (gas → liquid)
    • Deposition (gas → solid)
    • Sublimation (solid → gas)
Water as a Solvent: Universal Solvent: dissolves more substances than any other liquid.
  • Inputs: precipitation, river runoff, hydrothermal vents
  • Removal: evaporation, mineral formation.
Seawater Composition

Salinity = amount of dissolved solids (measured in ppt = parts per thousand)

  • 99% of dissolved material = 6 solutes
    • Chloride (Cl⁻): 55%
    • Sodium (Na⁺): 30%
    • Sulfate (SO₄²⁻): 8%
    • Magnesium (Mg²⁺): 4%
    • Calcium (Ca²⁺): 1%
    • Potassium (K⁺): 1%
  • 85% = sodium chloride (NaCl)
Rule of Constant Proportions: The ratio of major ions in seawater remains constant, regardless of salinity level
  • Ex: Always \sim1\,Na^+ : 1\,Cl^-\ .
Salinity, Temperature, & Density
  • Seawater density = function of both temperature and salinity.
  • Thermocline: rapid change in temperature with depth
  • Surface ocean: mixed by wind, relatively warm
  • Deep ocean: colder, denser.
Dissolved Gases
  • Exchange between ocean & atmosphere.
  • Oxygen (O₂):
    • Produced by photosynthesis
    • Consumed by respiration
  • Carbon dioxide (CO₂): ∼80%\sim80\% of dissolved gases
    • Key for pH buffering.
  • Nitrogen (N₂): important for proteins but largely inert
Practice Questions
  1. Why does water reach maximum density at 4 ∘C4 \,^\circ C rather than at its freezing point?
  2. Explain the Rule of Constant Proportions with an example.
  3. How does salinity influence the density of seawater?
  4. Why is transparency important for marine ecosystems?
  5. What would happen to marine life if gases could not exchange between the ocean and atmosphere?
Ocean Primary Production
Energy and Trophic Structure
  • Autotrophs: make food from inorganic nutrients (photosynthesis/chemosynthesis)
  • Heterotrophs: consume organic material (all animals)

Trophic levels:

  • Producers (autotrophs)
  • Consumers (herbivores, carnivores, omnivores)

Food chain vs. Food web: simple line vs. interconnected network.

  • Grazing chain: phytoplankton → zooplankton → nekton (fish)
  • Detritus chain: detritus → deposit feeders → nekton
  • Energy pyramid:
    • Energy decreases at higher levels
    • Biomass & organism size increase with trophic level
    • Only ∼10%\sim10\% energy transfer per step.
Primary Production Basics

Definition: Rate of organic matter production from inorganic compounds (mainly CO₂ + H₂O).

  • Photosynthesis: 6CO<em>2+6H</em>2O+lightenergy→C<em>6H</em>12O<em>6+6O</em>26CO<em>2 + 6H</em>2O + light energy \to C<em>6H</em>{12}O<em>6 + 6O</em>2
  • Requirements: Light, water, CO₂, plus nutrients (N, P, Fe, etc.).

Chemosynthesis: Uses chemical energy (not light) to fix carbon.

  • Respiration (autotrophs & heterotrophs): C<em>6H</em>12O<em>6+6O</em>2→6CO<em>2+6H</em>2O+ATPC<em>6H</em>{12}O<em>6 + 6O</em>2 \to 6CO<em>2 + 6H</em>2O + ATP (energy)
Nutrients
  • Macronutrients: N, P, Si, Mg, K, S (needed in large amounts)
  • Micronutrients: Fe, Cu, Se (needed in small amounts)
  • Redfield Ratio: C:N:P = 106:16:1 (phytoplankton ratio)

Nutrient cycling: Decomposition → recycling of nutrients → supports new growth.

Phytoplankton and Ocean Productivity
  • Phytoplankton = 97% of ocean photosynthesis
  • Macroalgae (kelp, seaweeds) = ∼3%\sim3\% .
  • Small size = large surface area-to-volume ratio → slows sinking, increases nutrient/light uptake.

Some species have spines to increase floatation.

Measuring Primary Productivity
  • Units:
    • Local: mg C m⁻³ day⁻¹ (10–100 typical)
    • Depth-integrated: mg C m⁻² day⁻¹ (75–1000 typical)
  • Gross Productivity: Total C fixed by photosynthesis
  • Net Productivity: Gross – Respiration
  • Measuring Biomass:
    • Direct counts (microscopy, flow cytometry)
    • Chlorophyll a concentration (spectrophotometry, fluorescence, HPLC)
    • Remote sensing (satellites, water color, fluorescence)
  • Chlorophyll a: Proxy for phytoplankton biomass and productivity.
Depth and Light
  • Photic Zone: Upper sunlit layer where photosynthesis > respiration
  • Compensation Depth: Respiration = photosynthesis (net = 0)
  • Critical Depth: Depth where total photosynthesis = total respiration for the whole water column.
    • Mixing Depth < Critical Depth → Bloom occurs
    • Mixing Depth > Critical Depth → No bloom
  • Surface photoinhibition: Excess light (esp. UV) can reduce photosynthesis at the surface.
Photosynthetic Pigments
  • Chlorophylls: Main pigments (absorb blue/red, reflect green)
  • Carotenoids: Accessory pigments (orange/yellow)
  • Phycobilins: Accessory pigments (red/blue in cyanobacteria)

Accessory pigments transfer absorbed energy → chlorophyll.

Distribution of Productivity
  • High productivity: Coastal zones, upwelling regions, estuaries
  • Low productivity: Open ocean gyres (nutrient-poor)
  • Vertical distribution: Deep Chlorophyll Maximum (DCM) often forms below surface.
  • Nutrients: Increase with depth; surface waters depleted by phytoplankton uptake.
Seasonal cycles (temperate oceans):
  • Spring bloom: high productivity, nutrient availability.
  • Summer stratification: nutrients limited, productivity declines.
  • Fall mixing: nutrients return, productivity increases.
  • Winter: low light limits growth.
Ecosystem and Biogeochemical Impact
  • Primary production fuels marine food webs.
  • Carbon fixation: drives global carbon cycle.
  • Controls oxygen levels and nutrient availability in the ocean.
Practice Questions
  1. Explain why phytoplankton dominate ocean primary production compared to macroalgae.
  2. Why is chlorophyll a used as a proxy for phytoplankton biomass?
  3. Describe the relationship between mixing depth and critical depth in bloom formation.
  4. How do accessory pigments benefit photosynthesis?
  5. Compare nutrient and productivity patterns in coastal vs. open ocean regions.
Phytoplankton

Plankton (Greek: planktos = wanderer)
Organisms that drift passively or swim too weakly to move against even modest currents

Phytoplankton (“plant plankton”)

  • Microscopic, photosynthetic organisms
  • Live in the euphotic zone (sunlit surface waters)

Zooplankton (“animal plankton”)

  • Small, heterotrophic drifters
  • Feed on phytoplankton
Plankton by Life Cycle
  • Holoplankton: Spend entire lives as plankton
  • Meroplankton: Only planktonic in larval stages
Advantages of Meroplankton
  • Disperse larvae widely using surface currents
  • Essential for sessile organisms (no mobility otherwise)
  • Rapid development into independent feeders
  • Require no long-term parental care or stored yolk
Role in the Ocean

Phytoplankton as Key Agents of Change:

  • Change concentrations of dissolved gases in seawater
    • Daytime: Photosynthesis → removes CO₂, releases O₂
    • Day & Night: Respiration → removes dissolved O₂
  • Importance
    • Make up 95% of ocean biomass
    • Foundation of marine food chains
    • Produce up to 60% of Earth’s oxygen
Plankton & Trophic Levels

Primary productivity: Phytoplankton

Zooplankton biomass depends on phytoplankton availability

Plankton Migration
  • Migrate vertically from euphotic zone (day) to aphotic zone (night) and back
  • Affected by internal waves & density currents
  • Create Deep Scattering Layer (DSL)
    • Reflects sonar, can give false “bottom” readings
Factors Affecting Plankton Populations
  • Nutrient availability
  • Light & temperature
  • Water currents and mixing
Types of Phytoplankton
  • Cyanobacteria (Blue-Green Algae)
  • Chrysophyta (Diatoms)
    • Shapes: Centric (circular) & Pennate (elongated)
  • Pyrrophyta (Dinoflagellates)
    • Cause Red Tide:
    • Triggered by nutrient influx + warm, sunny weather
    • Can release toxins when they die off
    • Leads to Paralytic Shellfish Poisoning (PSP)
Invertebrate Diversity
General Traits of Invertebrates
  • Kingdom Animalia
  • Eukaryotic, multicellular, heterotrophic organisms
  • Cells organized into tissues (except sponges)
  • 36 animal phyla, many marine
  • Ocean invertebrates = ecologically diverse
  • Unique marine features:
    • Filter/suspension feeding
    • Broadcast spawning (common for sessile benthic animals).
Phylum Porifera (Sponges)
  • ∼5,000\sim5,000 species.

Characteristics:

  • No true tissues/organs.
  • No symmetry, no nerves, muscles, mouth, or gut.
  • Sessile (benthic).
  • Skeleton of CaCO<em>3\text{CaCO}<em>3 or SiO</em>2\text{SiO}</em>2 spicules or spongin.
  • Filter feeders (water drawn through pores)
  • Reproduction:
    • Asexual: budding, gemmules, fragmentation.
    • Sexual: mostly hermaphroditic. Fertilization internal, larvae dispersed by currents.
  • Ecological role: Provide habitat for thousands of species.
  • Predators: few (sea slugs, turtles, some fish). Can produce toxins.
Phylum Cnidaria
  • ∼9,000\sim9,000 species (corals, jellyfish, anemones)
  • Traits:
    • Radial symmetry, diploblastic
    • Tissues & organs.
    • Nematocysts (stinging cells)
    • Two body stages: Polyp and Medusa.
    • Blind sac gut (mouth = anus).

Classes:

  • Hydrozoa: Hydra, Portuguese Man-of-War, fire coral.
  • Scyphozoa: true jellyfish.
  • Cubozoa: box jellies, sea wasps (dangerous).
  • Anthozoa: corals, anemones, sea fans (sessile, only polyp stage).
Phylum Ctenophora (Comb Jellies)
  • Diploblastic
  • 8 rows of cilia for movement (“combs”)
  • Colloblasts = sticky cells to capture prey (not stingers)
  • Hydrostatic skeleton
  • Blind sac gut.
Phylum Platyhelminthes (Flatworms)
  • ∼10,000\sim10,000 species
  • Traits:
    • Bilateral symmetry.
    • Flat, thin body → diffusion for gas exchange.
    • Simple nervous system with ganglia, eyespots.
    • Blind gut

Classes:

  • Turbellaria: free-living flatworms
  • Trematoda: flukes (parasitic)
  • Cestoda: tapeworms (parasitic)
Phylum Nematoda (Roundworms)
  • Possibly 500,000+500,000+ species
  • Bilateral symmetry
  • Pseudocoelom (primitive body cavity)
  • Complete gut (mouth + anus)
  • No circulatory system
  • Extremely abundant, many are parasites
Phylum Mollusca
  • 200,000200,000 known species
  • Body plan:
    • Foot (movement)
    • Visceral mass (organ