St. Bridget College Science Review Flashcards

Institutional Context and Curriculum Outline

  • Institution: St. Bridget College, Inc.
  • Department: Basic Education Department
  • Accreditation Level: PAASCU Accredited - Level III
  • Institutional Motto: "LET YOUR LIGHT SHINE!"
  • Curriculum Syllabus Page Mapping:
    • Phase Changes (in Diagrams and Flowcharts): Page 54
    • Features of a Fair Test: Detailed in Supplementary File
    • Separation Techniques: Pages 97, 99, 101
    • Specialized Separation Methods (Chromatography, Distillation, Centrifugation): Pages 97, 99, 101
    • Modes of Reproduction in Plants: Pages 140–144

Phase Changes in Matter

  • Fundamental Definition of Phase Changes: Phase changes represent physical transitions of matter between solid, liquid, and gas states driven by changes in thermal energy (temperature) and pressure, without altering the underlying chemical composition of the substance.
  • Thermal Energy Absorption Processes (Endothermic Phase Changes):
    • Melting (Solid to Liquid): Occurs when thermal energy increases the kinetic energy of particles in a solid lattice, overcoming the intermolecular forces holding them in fixed positions. The precise temperature at which this transition occurs is the melting point.
    • Vaporization (Liquid to Gas): The conversion of a liquid into a gas, occurring through two distinct mechanisms:
    • Evaporation: A surface-level phenomenon occurring at temperatures below the boiling point.
    • Boiling: A rapid phase transition occurring throughout the entire liquid volume when vapor pressure equals external atmospheric pressure at the specific boiling point.
    • Sublimation (Solid directly to Gas): Direct transition from solid to gas phase without passing through an intermediate liquid phase (e.g., dry ice / solid CO2CO_2, naphthalene).
  • Thermal Energy Release Processes (Exothermic Phase Changes):
    • Freezing / Solidification (Liquid to Solid): Occurs when thermal energy is lost, causing kinetic energy to drop and allowing intermolecular forces to lock liquid particles into a rigid lattice at the freezing point.
    • Condensation (Gas to Liquid): Occurs when heat energy is removed from gas particles, slowing their movement and allowing cohesive forces to pull them together into a liquid state.
    • Deposition / Desublimation (Gas directly to Solid): Direct transition from a gas to a solid phase without passing through an intermediate liquid phase (e.g., frost formation on freezing surfaces).
  • Phase Change Diagrams and Flowcharts:
    • Heating and Cooling Curves: Graphical representations plotting temperature against heat added or removed.
    • Plateau Regions: Horizontal lines on phase diagrams where temperature remains constant (ΔT=0\Delta T = 0) during state transitions because thermal energy is utilized as latent heat to break or form intermolecular bonds rather than changing particle kinetic energy.
    • Latent Heat Values: Includes Latent Heat of Fusion (melting/freezing) and Latent Heat of Vaporization (boiling/condensation).

Features of a Fair Test in Scientific Inquiry

  • Core Concept of Experimental Fairness: A fair test is an experimental setup where only one independent variable is intentionally changed at a time, while keeping all other potential influencing factors constant. This ensures that any observed change in the dependent variable is unequivocally attributable to the manipulated factor.
  • Essential Experimental Variables:
    • Independent Variable (Manipulated Variable): The single factor or condition deliberately altered or tested by the investigator.
    • Dependent Variable (Responding Variable): The variable measured, observed, or recorded to evaluate the direct effect of altering the independent variable.
    • Controlled Variables (Constants): All extraneous parameters, environmental conditions, and experimental materials that must be held strictly constant across all trials and test groups to eliminate potential confounding influences.
  • Experimental Structure and Controls:
    • Experimental Group: The set of test units exposed to the varied independent variable.
    • Control Group: The baseline set of test units maintained under standard or unchanged conditions, providing a benchmark against which experimental results are evaluated.
  • Methodological Validity and Reliability:
    • Replication: Repeating experimental trials multiple times to minimize experimental error and ensure statistical reliability.
    • Sample Size: Utilizing a sufficiently large sample size to ensure representation and mitigate random anomalies.
    • Measurement Precision: Utilizing standardized units, calibrated tools, and objective procedures to capture dependent data accurately.

Separation Techniques for Mixtures

  • Physical Basis of Separation: Methods designed to separate physical combinations of two or more substances (mixtures) based on differences in their distinct physical properties such as particle size, density, boiling point, solubility, and magnetism.
  • Standard Separation Techniques:
    • Filtration: Used to separate insoluble solids from liquids using a porous barrier (e.g., filter paper). The liquid passing through is the filtrate, while the solid remaining on the filter is the residue.
    • Decantation: The physical process of carefully pouring off a top liquid layer from a settled insoluble solid or an immiscible liquid of lower density.
    • Evaporation: A technique used to isolate a dissolved soluble solid from a liquid solvent by heating the mixture until the liquid component completely vaporizes, leaving the solid residue.
    • Magnetic Separation: The process of using magnetic force to extract ferromagnetic materials (such as iron, nickel, or cobalt) from non-magnetic solid mixtures.
    • Sieving / Sifting: A mechanical method of separating solid particles of varying sizes by passing them through a mesh or perforated barrier.

Specialized Separation Methods: Chromatography, Distillation, and Centrifugation

  • Chromatography:
    • Operating Principle: A technique used to separate and identify complex mixtures based on the differential affinities of individual components toward a mobile phase and a stationary phase.
    • Stationary Phase: The non-moving medium through which the mixture components travel (e.g., strip of chromatography paper).
    • Mobile Phase: The fluid solvent (e.g., water, ethanol) that moves along or through the stationary phase carrying the mixture.
    • Separation Mechanism: Solutes with higher solubility in the mobile phase move faster and farther, whereas solutes with stronger adsorption to the stationary phase move slower, producing distinct separated bands or spots.
    • Primary Applications: Separation of plant pigments (chlorophylls, carotenoids), synthetic inks, food dyes, and biological fluids.
  • Distillation:
    • Operating Principle: A thermal separation process that isolates volatile liquids from a solution based on significant differences in their respective boiling points.
    • Process Sequence:
    1. Heating the liquid mixture to its boiling point to induce vaporization.
    2. Directing vapor into a condenser cooled by circulating water.
    3. Cooling the vapor back into liquid state (condensation).
    4. Collecting the pure condensed liquid as the distillate.
    • Variations:
    • Simple Distillation: Applied when boiling point differences between components exceed 25 ∘C25\,^\circ\text{C}.
    • Fractional Distillation: Incorporates a fractionating column to perform continuous condensation-vaporization cycles, allowing separation of liquids with close boiling points.
  • Centrifugation:
    • Operating Principle: A mechanical technique that uses rapid rotational force (centrifugal acceleration) to separate components of varying densities within a liquid suspension.
    • Separation Mechanism: High-speed rotation forces denser particles outward to the bottom of a container to form a solid mass called the pellet, leaving the less dense liquid layer at the top called the supernatant.
    • Primary Applications: Fractionation of blood into plasma and blood cells, cream separation in dairy processing, and cell organelle isolation.

Modes of Reproduction in Plants: Sexual Reproduction

  • Definition: A biological process in plants involving the fusion of male and female haploid gametes to form a diploid zygote, leading to genetic variation in offspring.
  • Anatomy of a Flower:
    • Male Reproductive Organ (Stamen):
    • Anther: Terminal sac-like structure that produces and releases pollen grains containing male gametes.
    • Filament: Slender stalk supporting the anther, positioning it for optimal pollen transfer.
    • Female Reproductive Organ (Pistil / Carpel):
    • Stigma: Sticky or feathery surface at the top of the pistil designed to catch pollen grains.
    • Style: Elongated tube connecting the stigma to the ovary down which the pollen tube grows.
    • Ovary: Enlarged basal chamber containing one or more ovules; develops into the fruit after fertilization.
    • Ovule: Egg-containing structure within the ovary; develops into the seed post-fertilization.
    • Non-Reproductive Supporting Structures:
    • Petals (Corolla): Modified, often brightly colored leaves designed to attract animal vectors.
    • Sepals (Calyx): Green, leaf-like structures enclosing and protecting the developing floral bud.
    • Receptacle: The thickened base of the stem supporting the flower whorls.
    • Pedicel: The stem that attaches a single flower to the plant main axis.
  • Pollination Mechanisms:
    • Definition: The transfer of pollen grains from the anther to the receptive stigma.
    • Self-Pollination: Occurs when pollen grains are transferred from an anther to the stigma of the same flower or another flower on the same individual plant. Maintains genetic consistency.
    • Cross-Pollination: Occurs when pollen grains are transferred from an anther of one plant to the stigma of a flower on a different plant of the same species. Enhances genetic diversity.
    • Vectors of Pollination: Biotic vectors (insects, birds, bats) and abiotic vectors (wind, water currents).

Natural Asexual Reproduction in Plants

  • Definition: A form of reproduction without the fusion of gametes, meiotic division, or seed production, resulting in offspring that are genetically identical clones of the parent plant.
  • Specialized Natural Vegetative Structures:
    • Rhizome: Modified, horizontal underground stems featuring distinct nodes and internodes. Adventitious roots grow downward into the soil while vertical shoots arise upward from axillary buds (e.g., ginger, iris, bamboo, turmeric).
    • Runners (Stolons): Horizontal stems that extend above ground along the surface of the soil. Nodes that come into contact with the soil develop adventitious roots and erect leafy shoots, establishing independent clone plants (e.g., strawberry, Bermuda grass).
    • Tubers: Thickened, swollen regions of underground stems modified for energy and nutrient storage. Tubers possess buds known as "eyes" situated at nodes, which sprout into new leafy shoots (e.g., potato).
    • Bulbs: Short, vertical underground stems surrounded by swollen, fleshy modified scale leaves that store food reserves. Terminal or axillary buds within the bulb develop into leaves and flowering shoots (e.g., onion, garlic, tulip).

Artificial Modes of Plant Reproduction

  • Definition: Human-guided vegetative propagation techniques implemented in agriculture and horticulture to multiply plants with desirable traits efficiently and rapidly.
  • Artificial Propagation Methods:
    • Cutting: A method where a portion of a stem, leaf, or root is detached from a healthy parent plant and placed in a moist medium (soil, water, or rooting medium) to encourage the growth of adventitious roots and shoots (e.g., rose, sugarcane, hibiscus, cassava).
    • Budding: A specialized form of grafting where a single bud (scion) with a thin layer of surrounding bark is removed from a source plant and inserted into a cut made in the bark of a rooted stock plant (e.g., citrus fruits, roses, rubber trees).
    • Grafting: A technique where vegetative tissues from two individual plants are joined together to grow as a unified organism:
    • Scion: The upper stem portion chosen for superior fruit, flower, or foliage characteristics.
    • Stock / Rootstock: The lower rooted plant chosen for root strength, disease resistance, or environmental adaptability.
    • Process: The vascular cambium layers of the scion and stock are brought into tight alignment and bound until the tissues fuse completely (e.g., mango, apple, avocado).
    • Tissue Culture (Micropropagation): An advanced in vitro laboratory technique where small pieces of plant tissue (explants) are isolated and grown under sterile, aseptic conditions on a nutrient culture medium containing plant growth regulators (auxins and cytokinins) to induce mass cellular division, organ differentiation, and generation of numerous plantlets (e.g., orchids, banana, oil palm).