WG1200HP4 Wireless Router Lamp Indicators and Parts

A collection of vocabulary terms based on the lamp status indicators and port specifications for the WG1200HP4 wireless router in both Base Unit and Converter/Repeater modes.

POWER lamp (Green - On)

Indicates that the power to the device is turned on.

POWER lamp (Orange - On)

Indicates a firmware version update in progress, completion of Rakuraku/WPS Wi-Fi settings, or device recovery.

POWER lamp (Red - Blinking)

Indicates the unit is in the initialization preparation state or that a WPS Wi-Fi setting has failed.

ACTIVE lamp (Orange - On - Base Unit)

Indicates the device is operating in Bridge Mode.

ACTIVE lamp (Green - Fast Blinking - Base Unit)

Indicates that the device is confirming a response from the peer (PPPoE) or waiting for IPv4 over IPv6 communication establishment.

ACTIVE lamp (Red - Slow Blinking - Base Unit)

Indicates that internet communication is temporarily unavailable during IPv4 over IPv6 communication mode.

2.4GHz lamp (Green - Fast Blinking)

Indicates that data is currently being transmitted or received on the 2.4GHz band.

5GHz lamp (Orange - Blinking)

Indicates the device is detecting interference (radar waves) on W53 or W56 channels.

TV lamp (Green - On)

Indicates TV mode is set to 'Use' or a link is established with a wireless client in extension mode on the 5GHz band.

CONVERTER lamp (Green - Blinking - Base Unit)

Indicates the forced DHCP server function is active while in Bridge Mode.

All Front Lamps Red

Indicates that a firmware abnormality has been detected.

ACTIVE lamp (Orange - On - Converter Mode)

Indicates the link with the base unit is established via 5GHz Wi-Fi or the unit is operating as a mesh repeater.

2.4GHz lamp (Orange - On/Blinking - Converter Mode)

Indicates 2.4GHz signal strength with the base unit is 'Medium'.

5GHz lamp (Red - On/Blinking - Converter Mode)

Indicates 5GHz signal strength with the base unit is 'Weak'.

CONVERTER lamp (Orange - On - Converter Mode)

Indicates the device is operating as a repeater without using the mesh function.

CONVERTER lamp (Green - On - Converter Mode)

Indicates the device is operating as a child unit (client) with repeater functions stopped, or as a mesh repeater.

LAN port

Port used to connect PCs or game consoles using a Category 5e or higher LAN cable (UTP cable recommended).

WAN port

Port used to connect to a broadband modem; can also be used as a LAN port when in non-mesh repeater/client mode.

Rakuraku Start button

A physical button used for WPS/Rakuraku Wi-Fi settings or to activate the forced DHCP server function.

Status Display Lamp Setting (Off)

A mode where lamps are turned off, which can be temporarily bypassed for 3 minutes by pressing the Rakuraku Start button for 2 to 3 seconds.