chapter 10 Tools and Techniques Test 4

Use a ______ to remove the valve stem from a tire when replacing a wheel assembly.

Valve repair tool

A cable tensiometer’s ______ lets you take cable tension measurements when the dial is difficult to see.

Pointer lock

_____ tool is used to roll the flaps of the boots down.

Deicer roller

_____ tool is used to tighten B nuts which tighten tubing.

Flair nut wrench

Control surface movements must be _____ with the movements of cockpit controls.

Insinc

_____ tool is used to cut holes.

Leather punch

_____ tool is used to measure the tension of wires.

Cable tensiometer

_____ can be removed by inserting the point of taper into the eye of the cotter pinch.

Cotter pin extractor

_____ tool is used for ease in a turn buckle.

Turn buckle wrench

A propeller protractors indicating edge is opposite its_____

Upper curved edge

Cable tensiometers:

Need a chart to convert the mater reading into the actual cable tension reading.

To provide a larger gripping surface?

Deicer pliers are used

What may be used to measure propeller angles?

Propeller protractor

What tool is used to grab stuff in tight places?

Mechanical fingers

What is used to retrieve magnetic objects?

Telescoping magnet

What are the pliers that hold & twist lock wire?

Lock wire pliers

What tool is used in order to prevent the value from going back into the tire?

Valve stem fishing tool

what is used to recondition air valves?

Valve repair tool

when twisting safety wire with lock wire pliers, you should:

Avoid over stressing or damaging the safety wire

A cable tensiometer can give an incorrect reading:

If the incorrect risers are used