1/39
Flashcards covering vehicle operations, safety procedures, and acronyms from Chapter 11 for Security Forces training.
Name | Mastery | Learn | Test | Matching | Spaced | Call with Kai |
|---|
No analytics yet
Send a link to your students to track their progress
What is the definition of a law enforcement vehicle?
A vehicle approved for apprehension, patrol, protection, surveillance, or covered by Item 17A/17A Federal Standard.
What is the minimum size non-tactical vehicle authorized for law enforcement use?
The minimum size needed to support mission requirements.
Who is responsible for coordinating servicing vehicle management before any vehicle is used?
Security Forces.
What must operators do prior to operating a GMV?
Perform an official vehicle safety and maintenance check.
What is the restriction on alcohol consumption before operating a GMV?
Alcohol cannot be consumed within 8hours before operating a GMV.
Which form is used for reporting vehicle misuse?
AF Form 870.
Which AF form is used to document vehicle inspections?
AF Form 1800.
What must be checked before each tour of duty?
Vehicle and vehicle equipment for safety and maintenance deficiencies.
What are the three phases of vehicle inspection?
Pretrip, during-operation, and after-operation inspections.
What is the purpose of performing preventive maintenance checks?
To reduce vehicle damage and increase operational capability.
What constitutes the first step of the seven-step inspection process?
Vehicle overview.
What actions should be taken before backing a vehicle?
Check clearance, use mirrors, and use a spotter if required.
Under what condition must backing stop immediately?
If visual contact with the spotter is lost.
What are the operator's responsibilities during the transportation of passengers?
Ensure seatbelts are used and maintain safe loading/unloading.
What does the acronym DCA stand for?
Defensive Counter Air.
What is the function of OPSEC?
To protect critical information from adversary exploitation.
What does the acronym DCO stand for?
Defensive Cyberspace Operations.
What is cybersecurity designed to protect?
Networks, systems, and information.
What are the five specific Personnel Recovery tasks?
Report, Locate, Support, Recover, and Reintegrate.
What does the acronym CBRN stand for?
Chemical, Biological, Radiological, and Nuclear.
What is the objective of Antiterrorism programs?
To reduce vulnerability to terrorist acts.
What is the definition of Combat Identification (CID)?
The accurate distinction of enemy and friendly forces.
What is the purpose of Counter-IED operations?
Activities aimed at reducing casualties and damage from IEDs.
How is an insider threat defined?
A threat originating from someone with authorized access.
What is the primary purpose of the M-series cargo truck?
Airdrop recovery and cargo transport.
What does the acronym MRAP stand for?
Mine Resistant Ambush Protected.
What is a key safety rule regarding MRAP operations?
Always use seatbelts.
What is the maximum speed capability of an MRAP vehicle?
69mph.
What does the acronym HMMWV stand for?
High Mobility Multipurpose Wheeled Vehicle.
What is the ground clearance of the M1116 HMMWV?
16inches.
What step should be taken before starting a tactical vehicle Preventive Maintenance Checks and Services (PMCS)?
Conduct a thorough inspection and annotate any discrepancies.
What is the purpose of proper load distribution?
To prevent overloading and maintain vehicle stability.
What is a common hazard associated with overloaded vehicles?
Vehicle rollover or component failure.
What is the purpose of blackout marker lights?
To mark vehicle location during blackout operations.
What qualification is mandatory for airfield NVD driving?
Wing-approved NVD training and qualification.
What does the acronym OPCON stand for?
Operational Control.
What does the acronym TACON stand for?
Tactical Control.
What is the first thing that should be done in the event of a vehicle rollover?
Follow unit rollover procedures and maintain safety.
What is the initial action required when fording water?
Inspect depth and conditions before crossing.
What Personal Protective Equipment (PPE) is required for ATV/LATV operation?
Knee and shin guards and padded gloves.